BS EN ISO 10472-6-2008 Safety requirements for industrial laundry machinery - Part 6 nIroning and fusing presses《工业洗衣机的安全要求 熨烫及熔压机》.pdf

1、BS EN ISO10472-6:2008ICS 97.060NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDSafety requirementsfor industrial laundrymachineryPart 6: Ironing and fusing presses (ISO10472-6:1997)This British Standardwas published under theauthority of the StandardsPolicy and

2、StrategyCommittee on 31 December2008 BSI 2008ISBN 978 0 580 63657 8Amendments/corrigenda issued since publicationDate CommentsBS EN ISO 10472-6:2008National forewordThis British Standard is the UK implementation of EN ISO10472-6:2008. It is identical to ISO 10472-6:1997. It supersedes BS ENISO 10472

3、-6:1998 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee TCI/33, Textile machinery.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionso

4、f a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 10472-6November 2008ICS 97.060 Supersedes EN ISO 10472-6:1997 English VersionSafety requirements for i

5、ndustrial laundry machinery - Part 6:Ironing and fusing presses (ISO 10472-6:1997)Exigences de scurit pour les machines de blanchisserieindustrielle - Partie 6: Presses repasser et thermocoller(ISO 10472-6:1997)Sicherheitsanforderungen fr industrielleWschereimaschinen - Teil 6: Bgel- und Fixierpress

6、en(ISO 10472-6:1997)This European Standard was approved by CEN on 23 October 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and b

7、ibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility

8、 of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Irela

9、nd, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B

10、-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 10472-6:2008: EBS EN ISO 10472-6:2008EN ISO 10472-6:2008 (E) 3 Foreword The text of ISO 10472-6:1997 has been prepared by Technical Committee ISO/TC 72 “Textile

11、machinery and machinery for dry-cleaning and industrial laundering” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 10472-6:2008 by Technical Committee CEN/TC 214 “Textile machinery and accessories” the secretariat of which is held by SNV. This European

12、Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. Attention is drawn to the possibility that some of the elements of

13、 this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 10472-6:1997. This document has been prepared under a mandate given to CEN by the European Commission and the European F

14、ree Trade Association, and supports essential requirements of EC Directives. For relationship with EC Directives, see informative Annexes ZA and ZB, which are integral parts of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following cou

15、ntries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Sp

16、ain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 10472-6:1997 has been approved by CEN as a EN ISO 10472-6:2008 without any modification. BS EN ISO 10472-6:2008EN ISO 10472-6:2008 (E) 4 Annex ZA (informative) Relationship between this European Standard and the Esse

17、ntial Requirements of EU Directive 98/37/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive Machinery 98/37/EC, amended by

18、 98/79/EC. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standar

19、d, a presumption of conformity with the relevant Essential Requirements (except 1.7.4. (f) of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. BS EN ISO 10472-6:2008EN ISO

20、 10472-6:2008 (E) 5 Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means

21、 of conforming to Essential Requirements of the New Approach Directive Machinery 2006/42/EC. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normativ

22、e clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements (except 1.4.2.1 2, 1.7.3, 1.7.4.2 t) and u) of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives

23、may be applicable to the product(s) falling within the scope of this standard. BS EN ISO 10472-6:2008ISO ISO 10472-6:1997(E)iiiForewordISO (the International Organization for Standardization) is a worldwide federation of national standardsbodies (ISO member bodies). The work of preparing Internation

24、al Standards is normally carried out throughISO technical committees. Each member body interested in a subject for which a technical committee hasbeen established has the right to be represented on that committee. International organizations,governmental and non-governmental, in liaison with ISO, al

25、so take part in the work. ISO collaboratesclosely with the International Electrotechnical Commission (IEC) on all matters of electrotechnicalstandardization.Draft International Standards adopted by the technical committees are circulated to the member bodies forvoting. Publication as an Internationa

26、l Standard requires approval by at least 75 % of the member bodiescasting a vote.International Standard ISO 10472-6 was prepared by Technical Committee ISO/TC 72, Textile machinery andmachinery for dry-cleaning and industrial laundering, Subcommittee SC 5, Industrial laundry anddry-cleaning machiner

27、y.ISO 10472 consists of the following parts, under the general title Safety requirements for industrial laundrymachinery: Part 1: Common requirements Part 2: Washing machines and washer-extractors Part 3: Washing tunnel lines including component machines Part 4: Air dryers Part 5: Flatwork ironers,

28、feeders and folders Part 6: Ironing and fusing pressesBS EN ISO 10472-6:2008ISO 10472-6:1997(E) ISOivIntroductionThis part of ISO 10472 is intended to instruct the designer of industrial laundry machinery in a systematicmanner, focusing on his particular type of machine, regarding the relevant essen

29、tial safety requirements,and to suggest possible state-of-the-art safety solutions.The extent to which hazards are covered is indicated in the scope of this part of ISO 10472. In addition,machinery should comply as appropriate with ISO/TR 12100-1 and ISO/TR 12100-2 for hazards which are notspecifica

30、lly referred to in this part of ISO 10472.All examples given in this part of ISO 10472 represent the state of the art. Equivalent solutions areacceptable, provided they attain at least the same safety level.The designer is presumed to have taken into account all the provisions of ISO 10472-1 before

31、consideringthis part of ISO 10472.BS EN ISO 10472-6:2008INTERNATIONAL STANDARD ISO ISO 10472-6:1997(E)1Safety requirements for industrial laundry machinery Part 6:Ironing and fusing presses1 ScopeThis part of ISO 10472 covers, together with ISO 10472-1, most significant hazards associated with ironi

32、ngand fusing presses used in the laundry, garment and dry-cleaning industry, and in particular: scissor presses; cabinet presses; drawer presses; rotary presses (carousel) and other presses with multiple bucks.This part of ISO 10472 complements the basic requirements as laid down in ISO/TR 12100-1 a

33、ndISO/TR 12100-2. It also gives guidance to the designer on assessing the risks associated with the hazards(see EN 1050) and on selecting measures for attaining the required safety level.This part of ISO 10472 does not apply to ancillary equipment, e. g steam boilers, steam valves and supplypipe wor

34、k, vent systems, work feed systems and discharge systems, and ducting to the atmosphere.2 Normative referencesThe following standards contain provisions which, through reference in this text, constitute provisions ofthis part of ISO 10472. At the time of publication, the editions indicated were vali

35、d. All standards are subjectto revision, and parties to agreement based on this part of ISO 10472 are encouraged to investigate thepossibility of applying the most recent editions of the standards indicated below. Members of IEC and ISOmaintain registers of currently valid International Standards.IS

36、O 10472-1:1997, Safety requirements for industrial laundry machinery Part 1: Common requirements.ISO/TR 12100-1:1992, Safety of machinery Basic concepts, general principles for design Part 1: Basicterminology, methodology.ISO/TR 12100-2:1992, Safety of machinery Basic concepts, general principles fo

37、r design Part 2:Technical principles and specifications.ISO 13849-1:1), Safety of machinery Safety-related parts of control systems Part 1: General principlesfor design.ISO 13850:1996, Safety of machinery Emergency stop Principles for design.ISO 13852:1996, Safety of machinery Safety distances to pr

38、event danger zones being reached by theupper limbs.1) To be published.BS EN ISO 10472-6:2008ISO 10472-6:1997(E) ISO2ISO 14119:1), Safety of machinery Interlocking devices associated with guards Principles for designand selection.EN 574:1996, Safety of machinery Two-hand control device.EN 626-1:1994,

39、 Safety of machinery Elimination or reduction of risk to health from hazardous substancesemitted by machinery Part 1: Principles and specifications for machinery manufacturers.EN 953:1997, Safety of machinery General requirements for the design and construction of guards (fixed,movable).EN 1050:1996

40、, Safety of machinery Risk assessment.EN 1760-1:1997, Safety machinery Pressure sensitive protective devices Part 1: General principles forthe design and testing of pressure sensing mats and floors.EN 60204-1:1992, Safety of machinery Electrical equipment of machines Part 1: General requirements.IEC

41、 204-1: modified3 DefinitionsFor the purposes of this part of ISO 10472, the following definitions apply:3.1ironing pressMachine for the smoothing or shaping of fabric items by pressing them between two components, at leastone of which is heated and, if required, equipped with a steaming device.3.2f

42、using pressMachine for the fusing of two textile layers by pressing them between two components, at least one ofwhich is heated to a temperature such that the coating of one layer becomes adhesive.3.3buckComponent of the press, covered with one or more layers of textile material, upon which the fabr

43、ic item islaid, positioned and prepared if necessary.NOTE The buck may be heated and equipped with a steaming and/or suction device and/or blowing device.3.4headComponent of the press which executes the required pressure by interacting with the buck.NOTE Generally the head is heated and may be equip

44、ped with a steaming and/or suction device. Heads forindustrial laundry machinery usually have a polished metallic pressing surface; those for outerwear are covered withone or more layers of textile material.3.5scissor pressIroning or fusing press whose head is moved on a circular path or a combinati

45、on of circular and linear pathsagainst a stationary buck.3.6cabinet pressMachine into which a garment is placed on a vertical buck (or former) which is moved to a position betweentwo or more vertical press heads which move horizontally to press the garment against the buck.1) To be published.BS EN I

46、SO 10472-6:2008ISO ISO 10472-6:1997(E)3NOTE A cabinet press may have one or more vertical bucks which travel horizontally such that the entire equipmentmay be operated by two or more operators in concert.3.7drawer pressIroning or fusing press whose horizontal buck is moved on a horizontal linear pat

47、h under the head, then thebuck (or head) is pressed against the head (or buck) on a vertical, linear path.3.8rotary pressPress in which the loading, unloading and pressing operations are assigned to different positions of themovement of a turntable carrying the bucks.3.9upstroke pressPress comprisin

48、g an upper head and a lower buck, upon which the fabric item is prepared, after which theaction of the press raises the lower buck to the press head either mechanically or pneumatically.3.10multiple-buck pressPress similar to a rotary press in which the bucks can travel in a straight path.4 Hazards4

49、.1 GeneralThe hazards common to most industrial laundry machinery are listed in ISO 10472-1. Significant particularhazards found in ironing and fusing presses are listed in 4.2 to 4.8.4.2 Mechanical hazards4.2.1 Closing and pressing of the head and buck of all presses: crushing, impact; shifting or swinging around of the buck of cabinet, rotary, drawer and multiple-buck presses: shearing,crushing, impact.4.2.2 Operating mechanism of the head or buck for all presses: crushing and shearing.4.2