BS EN ISO 10572-2009 Mixed polyolefin fibre ropes《混合聚烯烃纤维缆绳》.pdf

1、BS EN ISO10572:2009ICS 59.080.50NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDMixed polyolefin fibreropes (ISO 10572:2009)This British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 December2009 BSI 2009ISBN 978 0 5

2、80 61719 5Amendments/corrigenda issued since publicationDate CommentsBS EN ISO 10572:2009National forewordThis British Standard is the UK implementation of EN ISO 10572:2009.It supersedes BS EN 14687:2004 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee

3、TCI/77, Ropes and cordage and fishing nets.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a Brit

4、ish Standard cannot confer immunityfrom legal obligations.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10572 December 2009 ICS 59.080.50 Supersedes EN 14687:2004English Version Mixed polyolefin fibre ropes (ISO 10572:2009) Cordages en fibres de polyolfines mlanges (ISO 10572:2009) Polyol

5、efingemisch-Faserseile (ISO 10572:2009) This European Standard was approved by CEN on 4 November 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

6、Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

7、 under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Gre

8、ece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Managem

9、ent Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10572:2009: EBS EN ISO 10572:2009EN ISO 10572:2009 (E) 3 Foreword This document (EN ISO 10572:2009) has been prepared by Technic

10、al Committee ISO/TC 38 “Textiles“ in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at th

11、e latest by June 2010, and conflicting national standards shall be withdrawn at the latest by June 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all s

12、uch patent rights. This document supersedes EN 14687:2004. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,

13、France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 10572:2009 has been approved by CEN as a EN ISO 1

14、0572:2009 without any modification. BS EN ISO 10572:2009ISO 10572:2009(E) ISO 2009 All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is nor

15、mally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in

16、the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepar

17、e International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that som

18、e of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 10572 was prepared by Technical Committee ISO/TC 38, Textiles. BS EN ISO 10572:2009BS EN ISO 10572:2009INTERNATIONAL STANDARD ISO 10572:2009(E)

19、 ISO 2009 All rights reserved 1Mixed polyolefin fibre ropes 1 Scope This International Standard specifies requirements for 3-strand hawser-laid, 4-strand shroud-laid, 8-strand braided and 12-strand braided ropes made of mixed polyolefin fibres, and gives rules for their designation. 2 Normative refe

20、rences The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 1968, Fibre ropes and cordage Vocabula

21、ry ISO 2307, Fibre ropes Determination of certain physical and mechanical properties ISO 9554:2005, Fibre ropes General specifications 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 1968 apply. 4 Designation Fibre ropes shall be designated by the fo

22、llowing: the words “fibre rope”; the number of this International Standard; the construction or type of rope (see Clause 6); the reference number of the rope; the material from which the rope is made. EXAMPLE Designation of a 3-strand hawser-laid rope, reference number 20 (Type A), corresponding to

23、a linear density of 181 ktex made of mixed polyolefin fibre (PO): Fibre rope ISO 10572 - A - 20 - PO BS EN ISO 10572:2009ISO 10572:2009(E) 2 ISO 2009 All rights reserved5 Materials The rope shall be constructed using bi-component fibres made of a blend during extrusion of polypropylene and of polyet

24、hylene, with a minimum of 15 % and a maximum of 50 % of polyethylene. 6 General requirements 6.1 Mixed polyolefin fibre ropes shall be constructed in one of the following ways: type A: 3-strand hawser-laid rope (see Figure 1); type B: 4-strand shroud-laid rope (see Figure 2); type L: 8-strand braide

25、d rope (see Figure 3); type T: 12-strand braided rope (see Figure 4). Figure 1 Shape of a 3-strand hawser-laid rope (type A) Figure 2 Shape of an 4-strand shroud-laid rope (type B) BS EN ISO 10572:2009ISO 10572:2009(E) ISO 2009 All rights reserved 3Figure 3 Shape of an 8-strand braided rope (type L)

26、 Figure 4 Shape of a 12-strand braided rope (type T) 6.2 Construction, manufacture, lay, labelling, packaging, invoicing and delivery lengths shall conform to ISO 9554. 7 Physical properties The linear density and minimum breaking force shall conform to Tables 1, 2 and 3. Table 1 Linear density and

27、minimum breaking force of 3-strand hawser-laid mixed polyolefin fibre ropes (type A) Linear densitybcMinimum breaking forcedekN Reference numberaNominal ktex Tolerance % Unspliced ropes Ropes with eye-spliced terminations 6 16,3 6,76 6,08 8 29,0 10 11,7 10,5 10 45,3 18,0 16,2 12 65,2 8 25,4 22,9 14

28、88,8 34,0 30,6 16 116 43,5 39,2 18 147 54,5 49,0 20 181 66,2 59,6 22 219 79,1 71,2 24 261 92,8 83,5 26 306 107 96,3 28 355 123 111 30 408 5 140 126 BS EN ISO 10572:2009ISO 10572:2009(E) 4 ISO 2009 All rights reservedTable 1 (continued) Linear densitybcMinimum breaking forcedekN Reference numberaNomi

29、nal ktex Tolerance % Unspliced ropes Ropes with eye-spliced terminations 32 464 157 141 36 587 194 175 40 725 234 211 44 877 277 249 48 1 040 325 293 52 1 220 376 338 56 1 420 429 386 60 1 630 486 437 64 1 860 544 490 68 2 100 609 548 72 2 350 677 609 80 2 900 818 736 88 3 510 985 887 96 4 170 5 1 1

30、70 1 050 aThe reference number corresponds to the approximate diameter, in millimetres. bThe linear density, in kilotex, corresponds to the net mass per length of the rope, expressed in grams per metre or in kilograms per kilometre. cThe linear density is obtained under reference tension and is meas

31、ured as specified in ISO 2307.dThe breaking forces relate to new, dry and wet ropes.eA force determined by the test methods specified in ISO 2307 is not necessarily an accurate indication of the force at which that rope might break in other circumstances and situations. The type and quality of termi

32、nations, the rate of force application, prior conditioning and previous force applications to the rope can significantly influence the breaking force. A rope bent around a post, capstan, pulley or sheave may break at a significantly lower force. A knot or other distortion in a rope may significantly

33、 reduce the breaking force. BS EN ISO 10572:2009ISO 10572:2009(E) ISO 2009 All rights reserved 5Table 2 Linear density and minimum breaking force of 4-strand shroud-laid mixed polyolefin ropes (type B) Linear densitybcMinimum breaking forcedekN Reference numberaNominal ktex Tolerance % Unspliced rop

34、es Ropes with eye-spliced terminations 6 16,3 6,08 5,47 8 29,0 10 10,5 9,45 10 45,3 16,2 14,6 12 65,2 8 22,9 20,6 14 88,8 30,6 27,5 16 116 39,2 35,2 18 147 49,1 44,2 20 181 59,6 53,6 22 219 71,2 64,1 24 261 83,5 75,2 26 306 96,3 86,7 28 355 111 100 30 408 126 113 32 464 141 127 36 587 175 158 40 725

35、 5 211 190 44 877 249 224 48 1 040 293 264 52 1 220 338 304 56 1 420 386 347 60 1 630 437 393 64 1 860 490 441 68 2 100 548 493 72 2 350 609 548 80 2 900 736 662 88 3 510 887 798 96 4 170 1 050 945 aThe reference number corresponds to the approximate diameter, in millimetres. bThe linear density, in

36、 kilotex, corresponds to the net mass per length of the rope, expressed in grams per metre or in kilograms per kilometre. cThe linear density is obtained under reference tension and is measured as specified in ISO 2307.dThe breaking forces relate to new, dry and wet ropes.eA force determined by the

37、test methods specified in ISO 2307 is not necessarily an accurate indication of the force at which that rope might break in other circumstances and situations. The type and quality of terminations, the rate of force application, prior conditioning and previous force applications to the rope can sign

38、ificantly influence the breaking force. A rope bent around a post, capstan, pulley or sheave may break at a significantly lower force. A knot or other distortion in a rope may significantly reduce the breaking force. BS EN ISO 10572:2009ISO 10572:2009(E) 6 ISO 2009 All rights reservedTable 3 Linear

39、density and minimum breaking force of 8-strand braided mixed polyolefin fibre rope (type L) and 12-strand braided mixed polyolefin fibre rope (type T) Linear densitybcMinimum breaking forcedekN Reference numberaNominal ktex Tolerance % Unspliced ropes Ropes with eye-spliced terminations 6 16,3 6,9 6

40、,2 8 29,0 10 12,1 10,9 10 45,3 18,8 16,9 12 65,2 8 26,9 24,2 14 88,8 36,4 32,7 16 116 47,2 42,5 18 147 59,3 53,4 20 181 72,8 65,5 22 219 87,4 78,7 24 261 104 93,6 26 306 121 109 28 355 139 125 30 408 158 142 32 464 179 161 36 587 224 202 40 725 274 247 44 877 327 294 48 1 040 385 347 52 1 220 5 448

41、403 56 1 420 514 463 60 1 630 583 525 64 1 860 657 591 68 2 100 737 663 72 2 350 820 738 80 2 900 995 896 88 3 510 1 190 1 070 96 4 170 1 400 1 260 104 4 900 1 620 1 460 112 5 680 1 880 1 690 120 6 520 2 130 1 920 128 7 420 2 420 2 180 136 8 380 2 720 2 450 144 9 390 3 040 2 740 BS EN ISO 10572:2009

42、ISO 10572:2009(E) ISO 2009 All rights reserved 7Table 3 (continued) Linear densitybcMinimum breaking forcedekN Reference numberaNominal ktex Tolerance % Unspliced ropes Ropes with eye-spliced terminations 152 10 500 3 380 3 040 160 11 600 5 3 740 3 370 aThe reference number corresponds to the approx

43、imate diameter, in millimetres. bThe linear density, in kilotex, corresponds to the net mass per length of the rope, expressed in grams per metre or in kilograms per kilometre. cThe linear density is obtained under reference tension and is measured as specified in ISO 2307.dThe breaking forces relat

44、e to new, dry and wet ropes.eA force determined by the test methods specified in ISO 2307 is not necessarily an accurate indication of the force at which that rope might break in other circumstances and situations. The type and quality of terminations, the rate of force application, prior conditioni

45、ng and previous force applications to the rope can significantly influence the breaking force. A rope bent around a post, capstan, pulley or sheave may break at a significantly lower force. A knot or other distortion in a rope may significantly reduce the breaking force. 8 Marking The marking shall

46、be carried out in accordance with Clause 6 of ISO 9554:2005. BS EN ISO10572:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStandards. It

47、presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI

48、to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 90

49、00. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/www