BS EN ISO 10685-3-2012 Ophthalmic optics Spectacle frames and sunglasses electronic catalogue and identification Technical information《眼科光学 眼镜架和太阳镜电子目录和识别 技术信息》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 10685-3:2012Ophthalmic optics Spectacleframes and sunglasseselectronic catalogue andidentificationPart 3: Technical information (ISO10685-3:2012)BS EN ISO 10685-3:2012

2、BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO10685-3:2012.The UK participation in its preparation was entrusted to TechnicalCommittee CH/172/3, Spectacles.A list of organizations represented on this committee can beobtained on request to its secretary.This

3、 publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 68670 2ICS 11.040.70Compliance with a British Standard cannot confer immu

4、nity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 December 2012.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10685-3 November 2012 ICS 11.040.70 Engli

5、sh Version Ophthalmic optics - Spectacle frames and sunglasses electronic catalogue and identification - Part 3: Technical information (ISO 10685-3:2012) Optique ophtalmique - Catalogue de montures de lunettes et de lunettes de soleil et identification - Partie 3: Informations techniques (ISO 10685-

6、3:2012) Augenoptik - Elektronischer Katalog und Warenbezeichnung fr Brillenfassungen und Sonnenbrillen - Teil 3: Technische Daten (ISO 10685-3:2012) This European Standard was approved by CEN on 7 December 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulat

7、e the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Stan

8、dard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the nat

9、ional standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Sl

10、ovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved

11、 worldwide for CEN national Members. Ref. No. EN ISO 10685-3:2012: EBS EN ISO 10685-3:2012EN ISO 10685-3:2012 (E) 3 Foreword This document (EN ISO 10685-3:2012) has been prepared by Technical Committee ISO/TC 172 “Optics and photonics“ in collaboration with Technical Committee CEN/TC 170 “Ophthalmic

12、 optics” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2013, and conflicting national standards shall be withdrawn at the latest by May 2013. Attenti

13、on is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of th

14、e following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherl

15、ands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 10685-3:2012 has been approved by CEN as a EN ISO 10685-3:2012 without any modification. BS EN ISO 10685-3:2012ISO 10685-3:2012(E) ISO 2012 All r

16、ights reserved iiiContents PageForeword iv1 Scope . 12 Normative references 13 Terms and definitions . 14 Technical information . 14.1 Identification 14.2 Technical data for frames item catalogue 1Annex A (normative) Field descriptions. 4Annex B (normative) Electronic frame catalogue schema (technic

17、al section) . 8Annex C (normative) Frame dimension descriptions . 9Annex D (informative) Electronic frame catalogue XML sample (technical section) .11Bibliography .15BS EN ISO 10685-3:2012ISO 10685-3:2012(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of

18、 national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Int

19、ernational organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with th

20、e rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by

21、 at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 10685-3 was prepared by Technical Committee ISO

22、/TC 172, Optics and photonics, Subcommittee SC 7, Ophthalmic optics and instruments.ISO 10685 consists of the following parts, under the general title Ophthalmic optics Spectacle frames and sunglasses electronic catalogue and identification: Part 1: Product identification and electronic catalogue pr

23、oduct hierarchy Part 2: Commercial information Part 3: Technical informationiv ISO 2012 All rights reservedBS EN ISO 10685-3:2012INTERNATIONAL STANDARD ISO 10685-3:2012(E)Ophthalmic optics Spectacle frames and sunglasses electronic catalogue and identification Part 3: Technical information1 ScopeThi

24、s part of ISO 10685 specifies the technical information and file format used for trading spectacle frames and sunglasses and to optimize the trading and processing of lenses for a given frame.This part of ISO 10685 includes sunglass clip-ons.2 Normative referencesThe following referenced documents a

25、re indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 8624, Ophthalmic optics Spectacle frames Measuring system and terminologyISO 10685

26、-1, Ophthalmic optics Spectacle frames and sunglasses electronic catalogue and identification Part 1: Product identification and electronic catalogue product hierarchy3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.3.1technical informationinformati

27、on needed to optimize the trading and processing of lenses for a given frame4 Technical information4.1 IdentificationAny technical information requires the appropriate frame identification as specified in ISO 10685-1. Commercial information is available in ISO 10685-2.4.2 Technical data for frames i

28、tem catalogueTables 1 and 2 specify the fields used to identify the technical information portion of the electronic frame item catalogue. Additional information and examples are available in Annex A. The “name” column defines the tag and attribute names within the XML file (see Annex B for schema de

29、finition). The “O/M” column indicates whether a field is optional (O) or mandatory (M). The “format” column indicates the data type, e.g. TEXT. ISO 2012 All rights reserved 1BS EN ISO 10685-3:2012ISO 10685-3:2012(E) The “length” column indicates the field character length. The decimal lengths listed

30、 do not include the decimal point or the sign. For example, a field with the length of 3 could contain 100,10.1 or -1.01. Data items in binary format are not limited in length. The “description” column is the description of the field.Table 1 Spectacle frame and sunglasses information for the technic

31、al portion of the electronic frame catalogueNAME O/M FORMAT LENGTH DESCRIPTIONFormer O BOOLEAN 1 LENS FORMER AVAILABILITYHbox O DECIMAL Max 4 LENS WIDTH (MM)Vbox O DECIMAL Max 4 LENS HEIGHT (MM)Dbl O DECIMAL Max 4 DISTANCE BETWEEN LENSESTmplng O DECIMAL 3 OVERALL LENGTH OF SIDEFed O DECIMAL 4 FRAME

32、EFFECTIVE DIAMETERLedg O TEXT 1 TYPE OF LENS EDGEGdepth O DECIMAL Max 3 GROOVE DEPTH IN THE LENS OF A SEMI-RIMLESS Gwidth O DECIMAL Max 3 GROOVE WIDTH IN THE LENS OF A SEMI-RIMLESSPanto O INTEGER Max 2 FRAME PANTOSCOPIC ANGLE (ANGLE OF SIDE)Fcrv O INTEGER 3 FRAME CURVE EXPRESSED IN CORRESPONDING BAS

33、E VALUE IN DIOPTRESFfang O INTEGER Max 2 FACE FORM ANGLETraces O TABLE SEE TABLE 2.Drillpnts O Table SEE TABLE 3.Fprocdesc O TEXT 255 FRAME PROCESSING INSTRUCTIONSRxable O BOOLEAN 1 MANUFACTURERS ASSERTION AS TO THE ABILITY TO INSERT AND RETAIN PRESCRIPTION LENSES IN THE FRAMETable 2 TracesNAME O/M

34、FORMAT LENGTH DESCRIPTIONTraceid M INTEGER Max 14 TRACE IDTraceweb O BOOLEAN 1 TRACE DATA IS AVAILABLE ON WEBSITEFtrc O TEXT Max 50 FRAME TRACE DATA LINKTrcfmt O BINARY TRACE DATATrcshapeidref O INTEGER Max 14SHAPE ID OF THE RELATED SHAPE ONLY AVAILABLE IF ISO 10685-2 (COMMERCIAL INFORMATION) IS INC

35、LUDED2 ISO 2012 All rights reservedBS EN ISO 10685-3:2012ISO 10685-3:2012(E)Table 3 Drilling pointsNAME O/M FORMAT LENGTH DESCRIPTIONDrillid M INTEGER Max 14 DRILLING POINTS IDDrille O BINARY DRILLING POINTS OF THE FRAMEDrill O BINARY DRILLING POINTS OF THE FRAME (DEPRECATED VER-SION)Traceidref O IN

36、TEGER Max 14 TRACE ID OF RELATED TRACEDrillShapei-drefO INTEGER Max 14SHAPE ID OF THE RELATED SHAPE ONLY AVAILABLE IF ISO 10685-2 (COMMERCIAL INFORMATION) IS INCLUDEDFor sample XML file, see Annex D. ISO 2012 All rights reserved 3BS EN ISO 10685-3:2012ISO 10685-3:2012(E)Annex A (normative) Field des

37、criptionsTable A.1 contains detailed field descriptions and examples for the electronic frame catalogue.Table A.1 Field of descriptions and examples for the electronic frame catalogueNAME EXAMPLECOMMENTS/ CODIFICATIONAdditional comments ebXML MappingFormer falseBoolean indicating if lens physical fo

38、rmer is available.Physical former is equivalent to lens shape or pattern as defined in ISO 11380. Flagged as true (avail-able) or false (not available).ReferencedOpticProd-uct DesignatedOp-ticProduct Classification ApplicableOpticProd-uct CharacteristicHbox 49.9 See Figure C.1.A precise measurement

39、of the hori-zontal distance between the verti-cal tangents of the frame groove. If the frame is either semi-rimless or three piece the measurement is taken using the lens edge. (mm)ReferencedOpticProd-uct DesignatedOp-ticProduct Classification ApplicableOpticProd-uct CharacteristicVbox 27.7 See Figu

40、re C.1.A precise measurement of the ver-tical distance between the horizon-tal tangents of the frame groove. If the frame is either semi-rimless or three piece the measurement is taken using the lens edge. (mm)ReferencedOpticProd-uct DesignatedOp-ticProduct Classification ApplicableOpticProd-uct Cha

41、racteristicDbl 16.0 See Figure C.1.A precise measurement of the minimum distance between lenses measured on the horizontal between the vertical tangents to the apices of the frame groove. If the frame is either semi-rimless or three piece the measurement is taken using the lens edge. (mm)ReferencedO

42、pticProd-uct DesignatedOp-ticProduct Classification ApplicableOpticProd-uct CharacteristicTmplng 135 ISO 8624This is the length from the inter-section of the dowel screws axis with the median plane of the joint to the end of the side (temple) and parallel to the centreline of it, the drop having bee

43、n straightened.ReferencedOpticProd-uct DesignatedOp-ticProduct Classification ApplicableOpticProd-uct CharacteristicFed 54.1DCS 3.08 or latest ver-sion and Figure C.1.Frame effective diameter (twice the longest radius from box centre to apex of the frame groove) in millimetres. If the frame is eithe

44、r semi-rimless or three piece the endpoint of the radius is taken using the lens edge.ReferencedOpticProd-uct DesignatedOp-ticProduct Classification ApplicableOpticProd-uct CharacteristicLedg AA BevelB FlatC GrooveD MixType of lens edge (similar to DCS 3.08 - Etyp)ReferencedOpticProd-uct DesignatedO

45、p-ticProduct Classification ApplicableOpticProd-uct Characteristic4 ISO 2012 All rights reservedBS EN ISO 10685-3:2012ISO 10685-3:2012(E)NAME EXAMPLECOMMENTS/ CODIFICATIONAdditional comments ebXML MappingGdepth 0.4DCS 3.08 or latest versionGroove depth in the lens when the Pclass of the frame is “Se

46、miRimless MountSpectacleFrameClass” or “SemiRimlessMountSunglassClass” (mm) ReferencedOpticProd-uct DesignatedOp-ticProduct Classification ApplicableOpticProd-uct CharacteristicGwidth 0.8DCS 3.08 or latest versionGroove width in the lens when the Pclass of the frame is “SemiRimless MountSpectacleFra

47、meClass” or “SemiRimlessMountSunglassClass” (mm)ReferencedOpticProd-uct DesignatedOp-ticProduct Classification ApplicableOpticProd-uct CharacteristicPanto 8 This angle in degrees is deter-mined by measuring the angle between the centreline of the side and a line drawn perpendicular to the vertical a

48、xis of the corre-sponding plane of the lens shape as shown in Figure C.3.ReferencedOpticProd-uct DesignatedOp-ticProduct Classifica-tion ApplicableOp-ticProduct CharacteristicFfang 6ISO 8624; See Figure C.2.The angle between the plane of the spectacle front and the plane of the right lens shape, or

49、of the left lens shape. The right or left face form angle is regarded as positive if the temporal side of the right or left lens plane is closer to the head than the plane of the spectacle front.ReferencedOpticProd-uct DesignatedOp-ticProduct Classifica-tion ApplicableOp-ticProduct CharacteristicTraces This table can support multiple traces.In Frame Trace product: ReferencedOpticProd-uct DesignatedOp-ticProduct Classification SubClassCode (with ClassCode=FrameTrace Clas