BS EN ISO 11111-1-2016 Textile machinery Safety requirements Common requirements《纺织机械 安全性要求 一般要求》.pdf

1、BS EN ISO 11111-1:2016Textile machinery SafetyrequirementsPart 1: Common requirements (ISO11111-1:2016)BS EN ISO 11111-1:2016Incorporating corrigendum October 2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN ISO 11111-1:2016 BRITISH STANDARDNational foreword

2、This British Standard is the UK implementation of EN ISO 11111-1:2016. It supersedes BS EN ISO 11111-1:2009 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee TCI/33, Textile machinery.A list of organizations represented on this committee can be obtained

3、on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016ISBN 978 0 580 96178 6ICS 59.120.01Compliance with a

4、British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2016.Amendments/corrigenda issued since publicationDate Text affected30 November 2016 Annex ZA updated by CENEUROPEAN STAND

5、ARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11111-1 June 2016 ICS 59.120.01 Supersedes EN ISO 11111-1:2009English Version Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016) Matriel pour lindustrie textile - Exigences de scurit - Partie 1: Exigences communes (ISO

6、11111-1:2016) Textilmaschinen - Sicherheitsanforderungen - Teil 1: Gemeinsame Anforderungen (ISO 11111-1:2016) This European Standard was approved by CEN on 5 May 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European S

7、tandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (Eng

8、lish, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium,

9、 Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerlan

10、d, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Memb

11、ers. Ref. No. EN ISO 11111-1:2016 EBS EN ISO 11111-1:2016EN ISO 11111-1:2016 (E) 3 European foreword This document (EN ISO 11111-1:2016) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and accessories“ in collaboration with Technical Committee CEN/TC 214 “Textile machinery and

12、accessories” the secretariat of which is held by SNV. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2016, and conflicting national standards shall be withdrawn at the latest by December

13、 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 11111-1:2009. This document has been prepared u

14、nder a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal R

15、egulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland

16、, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 11111-1:2016 has been approved by CEN as EN ISO 11111-1:2016 without any modification. BS E

17、N ISO 11111-1:2016EN ISO 11111-1:2016 (E) 4 Annex ZA (informative) Relationship between this International Standard and the Essential Requirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade A

18、ssociation to provide a means of conforming to Essential Requirements of the New Approach Directive 2006/42/EC on machinery. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member Sta

19、te, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be appli

20、cable to the product(s) falling within the scope of this standard. EN ISO 11111-1:2016 (E) 4 (infor ative) Relationship between this Europea Standard and the Essential requirements of EU Directive 2006/42/EC aimed to be covered Eur Standard has been prepared under a Co missions standardization reque

21、st M 396 (Mach nery) to provide a m s of conforming t essential requirements of the New Approach Directive2006/42/EC on machinery. On e this standard is cited in the Official Journal of the Eur pean Union under that Directive,compliance with the normative clauses of this standard given in Table ZA.1

22、 confers, within the limits ofthe scope of this standard, a presumption of conform ty with the corresponding essential requirementsof that Directive and associated EFTA regulation . Table ZA.1 Correspondence between this European Standard and Annex I of Directive 2006/42/EC Essential Requirements of

23、 Directive 2006/42/EC Clause(s)/sub-clause(s) of this EN Remarks/Notes All essential requirements of Annex I are covered All clauses are covered IMPORTANT Compliance with the requirements of ISO 11111-1 and all relevant machine specific parts of the ISO 11111- series is necessary to achieve presumpt

24、ion of conformity with the relevant essential requirements. WARNING 1 Presumption of conformity stays valid only as long as a reference to this European Standard is maintained in the list published in the Official Journal of the European Union. Users of this standard should consult frequently the la

25、test list published in the Official Journal of the European Union. WARNING 2 Other Union legislation may be applicable to the product(s) falling within the scope of this standard. BS EN ISO 11111-1:2016EN ISO 11111-1:2016 (E) 3 European foreword This document (EN ISO 11111-1:2016) has been prepared

26、by Technical Committee ISO/TC 72 “Textile machinery and accessories“ in collaboration with Technical Committee CEN/TC 214 “Textile machinery and accessories” the secretariat of which is held by SNV. This European Standard shall be given the status of a national standard, either by publication of an

27、identical text or by endorsement, at the latest by December 2016, and conflicting national standards shall be withdrawn at the latest by December 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not b

28、e held responsible for identifying any or all such patent rights. This document supersedes EN ISO 11111-1:2009. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For

29、 relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croa

30、tia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and t

31、he United Kingdom. Endorsement notice The text of ISO 11111-1:2016 has been approved by CEN as EN ISO 11111-1:2016 without any modification. BS EN ISO 11111-1:2016EN ISO 11111-1:2016 (E) 4 Annex ZA (informative) Relationship between this International Standard and the Essential Requirements of EU Di

32、rective 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive 2006/42/EC on machinery. Once this standard is cited in

33、 the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the r

34、elevant Essential Requirements of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. EN ISO 11111-1:2016 (E) 4 (infor ative) Relationship between this Europea Standard and t

35、he Essential requirements of EU Directive 2006/42/EC aimed to be covered Eur Standard has been prepared under a Co missions standardization request M 396 (Mach nery) to provide a m s of conforming t essential requirements of the New Approach Directive2006/42/EC on machinery. On e this standard is ci

36、ted in the Official Journal of the Eur pean Union under that Directive,compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits ofthe scope of this standard, a presumption of conform ty with the corresponding essential requirementsof that Directive and as

37、sociated EFTA regulation . Table ZA.1 Correspondence between this European Standard and Annex I of Directive 2006/42/EC Essential Requirements of Directive 2006/42/EC Clause(s)/sub-clause(s) of this EN Remarks/Notes All essential requirements of Annex I are covered All clauses are covered IMPORTANT

38、Compliance with the requirements of ISO 11111-1 and all relevant machine specific parts of the ISO 11111- series is necessary to achieve presumption of conformity with the relevant essential requirements. WARNING 1 Presumption of conformity stays valid only as long as a reference to this European St

39、andard is maintained in the list published in the Official Journal of the European Union. Users of this standard should consult frequently the latest list published in the Official Journal of the European Union. WARNING 2 Other Union legislation may be applicable to the product(s) falling within the

40、 scope of this standard. BS EN ISO 11111-1:2016ISO 11111-1:2016(E)Foreword vIntroduction vi1 Scope . 12 Normative references 23 Terms and definitions . 44 List of significant hazards . 55 Safety requirements and/or measures for frequently occurring hazards . 65.1 General . 65.2 Safety requirements f

41、or the different phases of “life” of a machine . 65.3 Risk reduction by design and safeguarding . 65.3.1 Inherently safe design measures . 65.3.2 Consideration of geometrical factors and physical aspects 65.3.3 Reduction of risks by safeguarding 65.4 Safety requirements for various hazards . 85.4.1

42、General 85.4.2 Electrical hazards 85.4.3 Mechanical hazards 115.4.4 Static electricity .145.4.5 Fluid power systems and components 155.4.6 Extreme temperatures .155.4.7 Noise reduction 165.4.8 Lasers 165.4.9 Radiation 165.4.10 Materials and substances 175.4.11 Fire 175.4.12 Explosion . 185.4.13 Ergo

43、nomics 185.5 Devices for special operation 195.6 Access to elevated operating positions and servicing points 205.7 Measures for the escape and rescue of trapped persons 205.8 Fitting of parts 206 Significant hazards and corresponding safety requirements and/or measures for certain machine elements a

44、nd their combinations 216.1 General 216.2 Drive and transmission enclosures 216.3 Particularly dangerous machine elements 216.4 Machine elements which normally do not require safeguarding .236.4.1 Low risk machine elements . 236.4.2 Machine elements out of reach . 236.5 Rollers 246.6 Rotating shafts

45、 306.7 Wheels . 306.7.1 Running wheels 306.7.2 Hand wheels . 316.8 Doors and lids . 326.8.1 General. 326.8.2 Opening and closing .326.8.3 Locking and unlocking of doors or lids under pressure .326.8.4 Entry into machines, vessels or items of plant .336.9 Observation windows 346.10 Conveyors . 346.11

46、 Fans 35 ISO 2016 All rights reserved iiiContents PageBS EN ISO 11111-1:2016ISO 11111-1:2016(E)6.12 Cutting devices . 356.13 Working platforms and walkways on machines, work areas adjacent to tanks and pits 366.14 Radiators or burners for the direct heat treatment of yarn and fabric .376.15 Devices

47、for steam heating of liquors . 376.16 Liquor preparatory machinery incorporating stirrers 386.17 Dancing rollers . 396.18 Batching devices . 396.18.1 General Information .396.18.2 Surface-driven batcher 406.18.3 Centre batcher .426.18.4 Ascending batch winder . 456.18.5 Equipment for automatic proce

48、ss material change on batching devices 466.19 Mangles . 486.20 Pilers and plaiters 496.21 Automatic machines and equipment 496.21.1 General. 496.21.2 Automatic guards .496.21.3 Mobile machines, handling devices, operational parts 506.21.4 Mobile machines and handling devices which could leave their

49、defined path .516.21.5 Floor-mounted and overhead rails (tracks) 516.21.6 Overhead transport of process material 526.22 Complex installations . 527 Verification of the compliance with the safety requirements and/or measures .538 Information concerning machine use .538.1 Signals and warning devices 538.2 Accompanying documents (in particular: instruction handbook)538.3 Marking 54Annex A (normative) Specifications .55Annex B (normative) Hot surfaces .57Annex C (normative) Verification methods 59Annex D (normative) Nip between roller and fabric 70Annex E (inf