BS EN ISO 11127-1-2011 Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast cleaning abrasives Sampling《涂料和其它相关制品应用.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 11127-1:2011Preparation of steel substratesbefore application of paintsand related products Testmethods for non-metallic blast-cleaning abrasivesPart 1: Sampling (ISO 1

2、1127-1:2011)Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11127-1:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO11127-

3、1:2011. It supersedes BS EN ISO 11127-1:1998 which iswithdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee STI/21, Surface preparation of steel.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not p

4、urport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012ISBN 978 0 580 67114 2ICS 25.220.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published

5、under the authority of theStandards Policy and Strategy Committee on 31 January 2012.Amendments issued since publicationDate Text affectedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from

6、IHS-,-,-EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11127-1 December 2011 ICS 25.220.10 Supersedes EN ISO 11127-1:1997English Version Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Samp

7、ling (ISO 11127-1:2011) Prparation des subjectiles dacier avant application de peintures et de produits assimils - Mthodes dessai pour abrasifs non mtalliques destins la prparation par projection - Partie 1: chantillonnage (ISO 11127-1:2011)Vorbereitung von Stahloberflchen vor dem Auftragen von Besc

8、hichtungsstoffen - Prfverfahren fr nichtmetallische Strahlmittel - Teil 1: Probenahme (ISO 11127-1:2011) This European Standard was approved by CEN on 14 December 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European S

9、tandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (Eng

10、lish, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium,

11、 Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTE

12、E FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11127-1:2011: ECopyright European Com

13、mittee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11127-1:2011EN ISO 11127-1:2011 (E) 3 Foreword This document (EN ISO 11127-1:2011) has been prepared by Technical Committee ISO/TC 35 “Paints

14、and varnishes“ in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2012, and c

15、onflicting national standards shall be withdrawn at the latest by June 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This docu

16、ment supersedes EN ISO 11127-1:1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germa

17、ny, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 11127-1:2011 has been approved by CEN as a EN ISO 11127-1:2011

18、 without any modification. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11127-1:2011ForewordISO (the International Organization for Standardization) is a worldwide f

19、ederation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that co

20、mmittee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accord

21、ance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires

22、 approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 11127-1 was prepared by Technical C

23、ommittee ISO/TC 35, Paints and varnishes, Subcommittee SC 12, Preparation of steel substrates before application of paints and related products.This second edition cancels and replaces the first edition (ISO 11127-1:1993), which has been revised to update the structure of ISO 11126 and ISO 11127 pre

24、sented in Annex B.ISO 11127 consists of the following parts, under the general title Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives : Part 1: Sampling Part 2: Determination of particle size distribution Part 3:

25、 Determination of apparent density Part 4: Assessment of hardness by a glass slide test Part 5: Determination of moisture Part 6: Determination of water-soluble contaminants by conductivity measurement Part 7: Determination of water-soluble chloridesISO 11127-1:2011(E) ISO 2011 All rights reserved i

26、iiCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11127-1:2011Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo re

27、production or networking permitted without license from IHS-,-,-BS EN ISO 11127-1:2011INTERNATIONAL STANDARD ISO 11127-1:2011(E)Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives Part 1:Sampling1 ScopeThis is one o

28、f a number of parts of ISO 11127 dealing with the sampling and testing of non-metallic abrasives for blast-cleaning.The types of non-metallic abrasive and requirements on each are contained in ISO 11126.The ISO 11126 and ISO 11127 series have been drafted as a coherent set of International Standards

29、 on non-metallic blast-cleaning abrasives. Information on all parts of both series is given in Annex B.This part of ISO 11127 specifies a method for the sampling of non-metallic blast-cleaning abrasives from consignments and for the subdivision of the sample into quantities suitable for undertaking

30、the appropriate test methods specified in other parts of ISO 11127.2 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.2.1total quantityoverall quantity of the abrasive to be tested for which the sampling procedure is to be considered as representative

31、2.2single samplesample obtained from the total quantity by a single sampling operationNOTE This sample is not immediately used for testing.2.3mixed samplesample obtained by mixing a number of single samples2.4reduced samplesample obtained by reduction of a mixed sampleNOTE In order to obtain a sampl

32、e quantity which is suitable for testing, all reduced samples but one are discarded after each reduction; the reduction procedure is then repeated, if necessary, on the sample retained.2.5test samplereduced sample that comprises a mass or volume sufficient for testing, portions of which are immediat

33、ely used for testing ISO 2011 All rights reserved 1Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11127-1:20113 Apparatus3.1 Sample thief, made from seamless steel tub

34、ing of inside diameter approximately 25 mm and length approximately 800 mm. The tube shall be pointed at one end and have a “T” handle at the other end. Holes shall be bored in a straight line, lengthways along the tube, and spaced at 50 mm intervals. The diameter of the holes shall be determined by

35、 the size of the particles to be sampled and shall be approximately three times the size of the largest particle.NOTE It is normally sufficient to use holes 10 mm in diameter for non-metallic abrasives.3.2 Sample divider, riffler or other equipment suitable for splitting a sample into parts.4 Proced

36、ure4.1 Sampling of consignmentsDepending on the quantity of abrasive to be tested and the condition of the consignment (packaged or unpackaged), the sampling procedure may be carried out manually or mechanically. Take samples as uniformly distributed as possible over the total quantity of the consig

37、nment, where appropriate, using the sample thief (3.1). The number of single samples to be taken shall be as specified in Table 1.Table 1 Number of single samples to be taken from a consignmentTotal quantitytonnesNumber of single samples100 15Guidance on sampling from stockpiles and transportation u

38、nits is given in Annex A.4.2 Preparation of the mixed samplePour aIl the single samples obtained as described in 4.1 into a suitable container and mix them until a uniform distribution of all particle sizes within the mixed sample can be expected.4.3 Reduction of sample sizeSubdivide the mixed sampl

39、e either mechanically, for example using a riffle-type sample divider (see 3.2), or manually. Unless otherwise specified or agreed, discard one of the reduced samples obtained after each subdivision (see Figure 1). Continue the operation until a test sample of appropriate size is obtained.4.4 Test s

40、ampleThe quantity of test sample needed will depend on the individual test method and is given in the appropriate part of ISO 11127 (see Annex B). Be sure to store the sample in a sealed container until required. Remix the test sample before taking portions for testing to ensure uniformity is mainta

41、ined. Do not remix used portions with remaining sample.ISO 11127-1:2011(E)2 ISO 2011 All rights reservedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11127-1:20115 Sa

42、mple identificationEach sample shall be clearly identified as to its origin. Test samples shall carry at least the following information:a) all details necessary to identify the product in accordance with the appropriate part of ISO 11126 (see Annex B), if applicable;b) the consignment identificatio

43、n details, e.g. suppliers name, order number, date of despatch, date of receipt, etc.;c) any product traceability reference which relates to the unit sampled.Total quantitySinglesampleMixed sampleReducedsampleTestsample1st subdivision2nd subdivisionnth subdivisionDiscardedDiscardedDiscardedSinglesam

44、pleSinglesampleSinglesampleSinglesampleReducedsampleReducedsampleReducedsampleReducedsampleReducedsampleFigure 1 Scheme for sampling and division of samples (example beginning with five single samples, followed by subdivision)ISO 11127-1:2011(E) ISO 2011 All rights reserved 3Copyright European Commi

45、ttee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11127-1:2011Annex A (informative) Guidance on sampling from stockpiles or transportation units1)A.1 GeneralIn some situations it is necessary to

46、 sample aggregates that have been stored in stockpiles or loaded into rail cars, barges or trucks. In such cases, the procedure should ensure that segregation does not introduce a serious bias in the results.A.2 Sampling from stockpilesA.2.1 ln sampling material from stockpiles, it is very difficult

47、 to ensure unbiased samples, due to the segregation which often occurs when material is stockpiled, with coarser particles rolling to the outside base of the pile. For coarse or mixed coarse and fine aggregate, every effort should be made to enlist the services of power equipment to develop a separa

48、te, small sampling pile composed of materials drawn from various levels and locations in the main pile, after which several increments may be combined to compose the field sample. If it is necessary to indicate the degree of variability existing within the main pile, separate samples should be drawn from separate areas of the pile.A.2.2 Where power equipment is not available, samples from stockpiles should be made up of at least three increments taken from the top third, at the mid-point and from the bottom third of the volume of the pile. A board pushed vertically in