BS EN ISO 11127-4-2011 Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives Assessment of hardne.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 11127-4:2011Preparation of steel substrates before application of paints and related products T e s t m e t h o d s f o r n o n - m e t a l l i c blast-cleaning abrasiv

2、esPart 4: Assessment of hardness by a glass slide testCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11127-4:2011 BRITISH STANDARDNational forewordThis British Standar

3、d is the UK implementation of EN ISO 11127-4:2011. It supersedes BS EN ISO 11127-4:1998, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee STI/21, Surface preparation of steel.A list of organizations represented on this committee can be obtained on reque

4、st to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2012 ISBN 978 0 580 67865 3 ICS 25.220.10 Compliance with a British Standard cannot confer immunity from legal obligations.This British

5、Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2012.Amendments issued since publicationDate Text affectedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitt

6、ed without license from IHS-,-,-EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11127-4 December 2011 ICS 25.220.10 Supersedes EN ISO 11127-4:1997English Version Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning

7、abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:2011) Prparation des subjectiles dacier avant application de peintures et de produits assimils - Mthodes dessai pour abrasifs non mtalliques destins la prparation par projection - Partie 4 : valuation de la duret au moyen

8、dun essai la lame de verre (ISO 11127-4:2011) Vorbereitung von Stahloberflchen vor dem Auftragen von Beschichtungsstoffen - Prfverfahren fr nichtmetallische Strahlmittel - Teil 4: Abschtzung der Hrte durch Vergleich mit Glasscheiben (ISO 11127-4:2011) This European Standard was approved by CEN on 14

9、 December 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may

10、be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to

11、 the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxe

12、mbourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rig

13、hts of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11127-4:2011: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN

14、 ISO 11127-4:2011 EN ISO 11127-4:2011 (E) 3 Foreword This document (EN ISO 11127-4:2011) has been prepared by Technical Committee ISO/TC 35 “Paints and varnishes“ in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of which is held by DIN. This European Standa

15、rd shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2012, and conflicting national standards shall be withdrawn at the latest by June 2012. Attention is drawn to the possibility that some of the elements of this doc

16、ument may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 11127-4:1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries

17、are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,

18、Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 11127-4:2011 has been approved by CEN as a EN ISO 11127-4:2011 without any modification. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or netwo

19、rking permitted without license from IHS-,-,-BS EN ISO 11127-4:2011ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical

20、committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with

21、the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft Internati

22、onal Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be t

23、he subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 11127-4 was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 12, Preparation of steel substrates before application of paints and related products.This sec

24、ond edition cancels and replaces the first edition (ISO 11127-4:1993), which has been revised to update the structure of ISO 11126 and ISO 11127 presented in Annex A.ISO 11127 consists of the following parts, under the general title Preparation of steel substrates before application of paints and re

25、lated products Test methods for non-metallic blast-cleaning abrasives : Part 1: Sampling Part 2: Determination of particle size distribution Part 3: Determination of apparent density Part 4: Assessment of hardness by a glass slide test Part 5: Determination of moisture Part 6: Determination of water

26、-soluble contaminants by conductivity measurement Part 7: Determination of water-soluble chloridesISO 11127-4:2011(E) ISO 2011 All rights reserved iiiCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without l

27、icense from IHS-,-,-BS EN ISO 11127-4:2011Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11127-4:2011INTERNATIONAL STANDARD ISO 11127-4:2011(E)Preparation of steel sub

28、strates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives Part 4:Assessment of hardness by a glass slide test1 ScopeThis is one of a number of parts of ISO 11127 dealing with the sampling and testing of non-metallic abrasives for blast-cleaning.

29、The types of non-metallic abrasive and requirements on each are contained in ISO 11126.The ISO 11126 and ISO 11127 series have been drafted as a coherent set of International Standards on non-metallic blast-cleaning abrasives. Information on all parts of both series is given in Annex A.This part of

30、ISO 11127 specifies a method of assessing whether a non-metallic blast-cleaning abrasive has a minimum hardness of 6 on Mohs scale.NOTE The test described in this part of ISO 11127 is a pass/fail test and is not a method for the accurate determination of hardness.2 Normative referencesThe following

31、referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 11127-1, Preparation of steel substrates before application

32、of paints and related products Test methods for non-metallic blast-cleaning abrasives Part 1: Sampling3 Apparatus3.1 Microscope, having a magnification of 10.3.2 Glass microscope slides.4 SamplingTake a representative sample of the product to be tested, as described in ISO 11127-1.5 Procedure5.1 Exa

33、mine a small quantity of the material under the microscope (3.1) and, if grains of different colours or diameter are present, select a few grains of each. ISO 2011 All rights reserved 1Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproductio

34、n or networking permitted without license from IHS-,-,-BS EN ISO 11127-4:20115.2 Place the selected grains between two glass microscope slides (3.2) and, whilst applying pressure, slowly move one slide over the other with a reciprocating motion for 10 s. Examine the glass surfaces and, if scratched,

35、 the material shall be considered as having a minimum hardness of 6 on Mohs scale.6 Test reportThe test report shall contain at least the following information:a) all details necessary to identify the product tested, in accordance with the appropriate part of ISO 11126 (see Annex A), if applicable;b

36、) a reference to this part of ISO 11127 (ISO 11127-4);c) the result of the test;d) any deviation from the test method specified;e) the date of the test;f) the name of the person who carried out the test.ISO 11127-4:2011(E)2 ISO 2011 All rights reservedCopyright European Committee for Standardization

37、 Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11127-4:2011Annex A (informative) International Standards for non-metallic blast-cleaning abrasivesRequirements and test methods for non-metallic blast-cleaning abrasiv

38、es are contained in ISO 11126 and ISO 11127, respectively.ISO 11126 consists of the following parts under the general title:Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 1: General introduction and clas

39、sification Part 3: Copper refinery slag Part 4: Coal furnace slag Part 5: Nickel refinery slag Part 6: Iron furnace slag Part 7: Fused aluminium oxide Part 8: Olivine sand Part 9: Staurolite Part 10: Almandite garnetISO 11127 consists of the following parts, under the general title:Preparation of st

40、eel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives Part 1: Sampling Part 2: Determination of particle size distribution Part 3: Determination of apparent density Part 4: Assessment of hardness by a glass slide test Part 5: Determin

41、ation of moisture Part 6: Determination of water-soluble contaminants by conductivity measurement Part 7: Determination of water-soluble chloridesISO 11127-4:2011(E) ISO 2011 All rights reserved 3Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo

42、reproduction or networking permitted without license from IHS-,-,-This page deliberately left blankCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-This page deliberately left bla

43、nkCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BSI is the independent national body responsible for preparing British Standardsand other standards-related publications, inform

44、ation and services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996

45、 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices. We would be grateful if anyone finding an inaccuracy or ambiguity whil

46、eusing this British Standard would inform the Secretary of the technical com-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an individual updating service called PLUS which ensuresthat subscribers au

47、tomatically receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standa

48、rds publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, it is BSI policy tosupply the BSI implementation of those that have been publishedas British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on