BS EN ISO 11127-5-2011 Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives Determination of moi.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 11127-5:2011Preparation of steel substrates before application of paints and related products T e s t m e t h o d s f o r n o n - m e t a l l i c blast-cleaning abrasiv

2、esPart 5: Determination of moistureCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11127-5:2011 BRITISH STANDARDNational forewordThis British Standard is the UK impleme

3、ntation of EN ISO 11127-5:2011. It supersedes BS EN ISO 11127-5:1998, which is withdrawn.The UK participation in its preparation was entrusted to T e c h n i c a l C o m m i t t e e S T I / 2 1 , S u r f a c e p r e p a r a t i o n o f s t e e l .A list of organizations represented on this committee

4、 can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2012 ISBN 978 0 580 67866 0 ICS 25.220.10 Compliance with a British Standard cannot confer immunity from legal

5、obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2012.Amendments issued since publicationDate T e x t a f f e c t e dCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo

6、 reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11127-5 December 2012 ICS 25.220.10 Supersedes EN ISO 11127-5:1997English Version Preparation of steel substrates before application of paints and related products - Test metho

7、ds for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:2011) Prparation des subjectiles dacier avant application de peintures et de produits assimils - Mthodes dessai pour abrasifs non mtalliques destins la prparation par projection - Partie 5 : Dtermination de

8、 lhumidit (ISO 11127-5:2011) Vorbereitung von Stahloberflchen vor dem Auftragen von Beschichtungsstoffen - Prfverfahren fr nichtmetallische Strahlmittel - Teil 5: Bestimmung der Feuchte (ISO 11127-5:2011) This European Standard was approved by CEN on 14 December 2011. CEN members are bound to comply

9、 with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC M

10、anagement Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same

11、 status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Por

12、tugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any mean

13、s reserved worldwide for CEN national Members. Ref. No. EN ISO 11127-5:2011: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11127-5:2011 EN ISO 11127-5:2011 (E) 3 For

14、eword This document (EN ISO 11127-5:2011) has been prepared by Technical Committee ISO/TC 35 “Paints and varnishes“ in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of which is held by DIN. This European Standard shall be given the status of a national stan

15、dard, either by publication of an identical text or by endorsement, at the latest by June 2012, and conflicting national standards shall be withdrawn at the latest by June 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN

16、and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 11127-5:1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard:

17、Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingd

18、om. Endorsement notice The text of ISO 11127-5:2011 has been approved by CEN as a EN ISO 11127-5:2011 without any modification. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS

19、 EN ISO 11127-5:2011ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a su

20、bject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (

21、IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committ

22、ees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be h

23、eld responsible for identifying any or all such patent rights.ISO 11127-5 was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 12, Preparation of steel substrates before application of paints and related products.This second edition cancels and replaces the first edit

24、ion (ISO 11127-5:1993), which has been revised to update the structures of ISO 11126 and ISO 11127 presented in Annex A.ISO 11127 consists of the following parts, under the general title Preparation of steel substrates before application of paints and related products Test methods for non-metallic b

25、last-cleaning abrasives : Part 1: Sampling Part 2: Determination of particle size distribution Part 3: Determination of apparent density Part 4: Assessment of hardness by a glass slide test Part 5: Determination of moisture Part 6: Determination of water-soluble contaminants by conductivity measurem

26、ent Part 7: Determination of water-soluble chloridesISO 11127-5:2011(E) ISO 2011 All rights reserved iiiCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11127-5:2011Copy

27、right European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11127-5:2011INTERNATIONAL STANDARD ISO 11127-5:2011(E)Preparation of steel substrates before application of paints and relat

28、ed products Test methods for non-metallic blast-cleaning abrasives Part 5:Determination of moisture1 ScopeThis is one of a number of parts of ISO 11127 dealing with the sampling and testing of non-metallic abrasives for blast-cleaning.The types of non-metallic abrasive and requirements on each are c

29、ontained in ISO 11126.The ISO 11126 and ISO 11127 series have been drafted as a coherent set of International Standards on non-metallic blast-cleaning abrasives. Information on all parts of both series is given in Annex A.This part of ISO 11127 specifies a method for the determination of the level o

30、f free moisture present in non-metallic blast-cleaning abrasives. It is determined by measuring the mass lost on heating.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated

31、references, the latest edition of the referenced document (including any amendments) applies.ISO 11127-1, Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives Part 1: Sampling3 ApparatusOrdinary laboratory apparatus

32、and glassware, together with the following:3.1 Container or tray, capable of withstanding the heat applied and of sufficient volume to allow the test portion to be spread in a thin layer.3.2 Oven, capable of being maintained at a temperature of (110 5) C.3.3 Balance, capable of weighing to an accura

33、cy of 0,01 g.3.4 Desiccator, containing a desiccant such as dried silica gel impregnated with cobalt chloride.4 SamplingTake a representative sample of the product to be tested, as described in ISO 11127-1. Be sure to store the sample in a sealed container until required. ISO 2011 All rights reserve

34、d 1Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11127-5:20115 Procedure5.1 GeneralCarry out the determination in duplicate.5.2 Test portionDry the container (3.1) in

35、 the oven (3.2) at (110 5) C for 15 min and allow it to cool to room temperature in the desiccator (3.4). Weigh the container to the nearest 0,01 g. Weigh into the container, to the nearest 0,01 g, a test portion of approximately 100 g (m0).5.3 DeterminationPlace the container with the test portion

36、in the oven (3.2), previously adjusted to (110 5) C, and leave for at least 1 h. Transfer the container to the desiccator and allow to cool to room temperature. Reweigh the container with the dried test portion to the nearest 0,01 g and determine the mass of the dried test portion (m1).6 Expression

37、of resultsCalculate the moisture content M, expressed as a percentage by mass, using the equationMm mm=0 10100wherem0is the mass, in grams, of the test portion before heating;m1is the mass, in grams, of the test portion after heating.If the duplicate determinations differ by more than 0,05 % (absolu

38、te), repeat the procedure described in Clause 5.Calculate the mean of two valid determinations and report the result to the nearest 0,01 %.7 Test reportThe test report shall contain at least the following information:a) all details necessary to identify the product tested, in accordance with the app

39、ropriate part of ISO 11126 (see Annex A), if applicable;b) a reference to this part of ISO 11127 (ISO 11127-5);c) the result of the test;d) any deviation from the test method specified;e) the date of the test;f) the name of the person who carried out the test.ISO 11127-5:2011(E)2 ISO 2011 All rights

40、 reservedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11127-5:2011Annex A (informative) International Standards for non-metallic blast-cleaning abrasivesRequirements

41、 and test methods for non-metallic blast-cleaning abrasives are contained in ISO 11126 and ISO 11127, respectively.ISO 11126 consists of the following parts under the general title:Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast

42、-cleaning abrasives Part 1: General introduction and classification Part 3: Copper refinery slag Part 4: Coal furnace slag Part 5: Nickel refinery slag Part 6: Iron furnace slag Part 7: Fused aluminium oxide Part 8: Olivine sand Part 9: Staurolite Part 10: Almandite garnetISO 11127 consists of the f

43、ollowing parts, under the general title:Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives Part 1: Sampling Part 2: Determination of particle size distribution Part 3: Determination of apparent density Part 4: Asse

44、ssment of hardness by a glass slide test Part 5: Determination of moisture Part 6: Determination of water-soluble contaminants by conductivity measurement Part 7: Determination of water-soluble chloridesISO 11127-5:2011(E) ISO 2011 All rights reserved 3Copyright European Committee for Standardizatio

45、n Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-This page deliberately left blankCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted wit

46、hout license from IHS-,-,-This page deliberately left blankCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BSI is the independent national body responsible for preparing British

47、Standardsand other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road L

48、ondon W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices. We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this British Standard would inform the Secretary of the