BS EN ISO 11148-10-2011 Hand-held non-electric power tools Safety requirements Compression power tools《手持非电动工具 安全性要求 压缩动力工具》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 11148-10:2011Hand-held non-electric power tools Safety requirementsPart 10: Compression power tools (ISO 11148-10:2011)Copyright European Committee for Standardization

2、Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11148-10:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 11148-10:2011. It supersedes BS EN 792-10:2000 + A1:2008,which wi

3、ll be withdrawn 30 June 2012.The UK participation in its preparation was entrusted to Technical Committee MCE/8/-/2, Hand-held, non-electric power tools - Safety.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to inc

4、lude all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2012 ISBN 978 0 580 64137 4 ICS 25.140.10 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under t

5、he authority of the Standards Policy and Strategy Committee on 31 January 2012.Amendments issued since publicationDate T e x t a f f e c t e dCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license f

6、rom IHS-,-,-EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11148-10 December 2011 ICS 25.140.10 Supersedes EN 792-10:2000+A1:2008English Version Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011) Machines portatives moteur non le

7、ctrique - Exigences de scurit - Partie 10: Machines portatives compression (ISO 11148-10:2011) Handgehaltene nicht elektrische betriebene Maschinen - Sicherheitsanforderungen - Teil 10: Maschinen zum Pressen (ISO 11148-10:2011) This European Standard was approved by CEN on 12 November 2011. CEN memb

8、ers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicati

9、on to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Managem

10、ent Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlan

11、ds, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in a

12、ny form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11148-10:2011: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11148-10:2011EN IS

13、O 11148-10:2011 (E) 3 Foreword This document (EN ISO 11148-10:2011) has been prepared by Technical Committee ISO/TC 118 “Compressors and pneumatic tools, machines and equipment“ in collaboration with Technical Committee CEN/TC 255 “Hand-held, non-electric power tools - Safety” the secretariat of whi

14、ch is held by SIS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2012, and conflicting national standards shall be withdrawn at the latest by June 2012. Attention is drawn to the possibilit

15、y that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 792-10:2000+A1:2008. This document has been prepared under a mandate given to CEN by the Europ

16、ean Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizatio

17、ns of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

18、 Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 11148-10:2011 has been approved by CEN as a EN ISO 11148-10:2011 without any modification. Copyright European Committee for Standardization Provided by IHS under license with CENNot fo

19、r ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11148-10:2011EN ISO 11148-10:2011 (E) 4 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC This European Standard has been prepared under a

20、 mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive 2006/42/EC on machinery. Once this standard is cited in the Official Journal of the European Union under that Directive an

21、d has been implemented as a national standard in at least one Member State, compliance with the clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the corresponding Essential Requirements of that Directive except ER 1.5.7 and associate

22、d EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without l

23、icense from IHS-,-,-BS EN ISO 11148-10:2011ISO 11148-10:2011(E) ISO 2011 All rights reserved iiiContents Page Foreword iv Introduction . v 1 Scope 1 2 Normative references 2 3 Terms and definitions . 2 3.1 General terms and definitions 2 3.2 Terms and definitions related to compression power tools .

24、 4 4 Safety requirements and/or protective measures 5 4.1 General . 5 4.2 Mechanical safety 5 4.3 Thermal safety . 5 4.4 Noise reduction . 5 4.5 Vibration . 6 4.6 Materials and substances processed, used or exhausted 7 4.7 Ergonomics 7 4.8 Controls 7 5 Verification . 8 5.1 General conditions for tes

25、ts . 8 5.2 Noise . 8 5.3 Vibration . 8 5.4 Unintentional start . 8 5.5 Power tool construction . 8 5.6 Structure of verification 9 6 Information for use 9 6.1 Marking, signs and written warnings 9 6.2 Instruction handbook 10 6.3 Operating instructions 14 6.4 Data . 14 6.5 Maintenance instructions .

26、15 Annex A (informative) List of significant hazards . 16 Annex B (informative) Examples of compression power tools covered by this part of ISO 11148 17 Annex C (normative) Symbols for labels and signs 19 Bibliography 20 Copyright European Committee for Standardization Provided by IHS under license

27、with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11148-10:2011ISO 11148-10:2011(E) iv ISO 2011 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member b

28、odies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental a

29、nd non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives

30、, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies ca

31、sting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 11148-10 was prepared by Technical Committee ISO/TC 118, Compressors and pneumatic

32、tools, machines and equipment, Subcommittee SC 3, Pneumatic tools and machines. ISO 11148 consists of the following parts, under the general title Hand-held non-electric power tools Safety requirements: Part 1: Assembly power tools for non-threaded mechanical fasteners Part 2: Cutting-off and crimpi

33、ng power tools Part 3: Drills and tappers Part 4: Non-rotary percussive power tools Part 5: Rotary percussive drills Part 6: Assembly power tools for threaded fasteners Part 7: Grinders Part 8: Sanders and polishers Part 9: Die grinders Part 10: Compression power tools Part 11: Nibblers and shears P

34、art 12: Circular, oscillating and reciprocating saws A part 13, dealing with fastener driving tools, is under preparation. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN I

35、SO 11148-10:2011ISO 11148-10:2011(E) ISO 2011 All rights reserved vIntroduction This document is a type-C standard as stated in ISO 12100. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are defined in the Scope of this part of ISO 11148. When req

36、uirements of this type-C standard are different from those which are stated in type-A or -B standards, the requirements of this type-C standard take precedence over the requirements of other standards, for machines that have been designed and built according to the requirements of this type-C standa

37、rd. ISO 11148 consists of a number of independent parts for individual types of hand-held non-electric power tools. Certain parts of ISO 11148 cover hand-held non-electric power tools driven by internal combustion engines powered by gaseous or liquid fuel. In these parts, the safety aspects relating

38、 to internal combustion engines are found in a normative annex. The parts are type-C standards and refer to pertinent Standards of type A and B where such standards are applicable. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or

39、 networking permitted without license from IHS-,-,-BS EN ISO 11148-10:2011Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11148-10:2011INTERNATIONAL STANDARD ISO 11148-

40、10:2011(E) ISO 2011 All rights reserved 1Hand-held non-electric power tools Safety requirements Part 10: Compression power tools IMPORTANT The colours represented in the electronic file of this document can be neither viewed on screen nor printed as true representations. For the purposes of colour m

41、atching, see ISO 3864-4, which provides colorimetric and photometric properties together with, as a guideline, references from colour order systems. 1 Scope This part of ISO 11148 specifies safety requirements for hand-held non-electric compression power tools (hereinafter “compression power tools”)

42、 intended for squeeze riveting, punching, shaping, pressing and cutting of metal, plastics and other materials. The compression power tools can be powered by compressed air or hydraulic fluid and are intended to be used by one operator and supported by the operators hand or hands, with or without a

43、suspension, e.g. a balancer. NOTE 1 At the time of publication, no compression power tools driven by internal combustion engines are known. Once these are identified, it is intended to amend this part of ISO 11148 to include such power tools. This part of ISO 11148 is applicable to: crimping tools;

44、collar splitters; power tools for metal forming (edge formers, folding tools, swagers); nut splitter heads; presses; punches; squeeze riveters; cutting power tools with parallel knives; alligator jaw compression riveters. NOTE 2 For examples of compression power tools, see Annex B. This part of ISO

45、11148 is not applicable to special requirements and modifications of compression power tools for the purpose of mounting them in a fixture. This part of ISO 11148 deals with all significant hazards, hazardous situations or hazardous events relevant to compression power tools when they are used as in

46、tended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of compression power tools in potentially explosive atmospheres. NOTE 3 EN 13463-1 gives requirements for non-electrical equipment for potentially explosive atmospheres. Copyrigh

47、t European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11148-10:2011ISO 11148-10:2011(E) 2 ISO 2011 All rights reserved2 Normative references The following referenced documents are in

48、dispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 3857-3, Compressors, pneumatic tools and machines Vocabulary Part 3: Pneumatic tools and machines ISO 5391, Pneumatic tools and machines Vocabulary ISO 12100:2010, Safety of machinery General principles for design Risk assessment and risk reduction ISO 13732-1, Ergonomics of the thermal envir