BS EN ISO 11546-2-2009 Acoustics - Determination of sound insulation performances of enclosures - Measurements in situ (for acceptance and verification purposes)《声学 隔声罩隔声性能的测定 现场测量.pdf

1、BS EN ISO11546-2:2009ICS 17.140.01NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAcoustics Determination ofsound insulationperformances ofenclosuresPart 2: Measurements in situ (foracceptance and verification purposes)(ISO 11546-2:1995)Licensed Copy: Wang Bin,

2、ISO/EXCHANGE CHINA STANDARDS, 19/07/2010 07:41, Uncontrolled Copy, (c) BSIThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 30 April2010 BSI 2010ISBN 978 0 580 67686 4Amendments/corrigenda issued since publicationDate CommentsBS EN ISO 11546-2:2009

3、National forewordThis British Standard is the UK implementation of EN ISO11546-2:2009. It is identical to ISO 11546-2:1995. It supersedes BS ENISO 11546-2:1996 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee EH/1/4, Machinery noise.A list of organizatio

4、ns represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.Licens

5、ed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2010 07:41, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 11546-2August 2009ICS 17.140.01 Supersedes EN ISO 11546-2:1995 English VersionAcoustics - Determination of sound insulation performances ofenclosures - P

6、art 2: Measurements in situ (for acceptance andverification purposes) (ISO 11546-2:1995)Acoustique - Dtermination de lisolement acoustique desencoffrements - Partie 2: Mesurages sur site (aux finsdacceptation et de vrification) (ISO 11546-2:1995)Akustik - Bestimmung der Schalldmmung vonSchallschutzk

7、apseln - Teil 2: Messungen im Einsatzfall(zum Zweck der Abnahme und Nachprfung) (ISO 11546-2:1995)This European Standard was approved by CEN on 3 August 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the

8、status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German).

9、 A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic

10、, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALI

11、SATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 11546-2:2009: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2010 07:41,

12、 Uncontrolled Copy, (c) BSIBS EN ISO 11546-2:2009EN ISO 11546-2:2009 (E) 3 Foreword The text of ISO 11546-2:1995 has been prepared by Technical Committee ISO/TC 43 “Acoustics” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 11546-2:2009 by Technical Comm

13、ittee CEN/TC 211 “Acoustics” the secretariat of which is held by DS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at the late

14、st by January 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 11546-2:1995. This document has be

15、en prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directives. For relationship with EC Directives, see informative Annexes ZA and ZB, which are integral parts of this document. According to the CEN/C

16、ENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lux

17、embourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 11546-2:1995 has been approved by CEN as a EN ISO 11546-2:2009 without any modification. Licensed Copy: Wang Bin, ISO/EXCHANGE CHI

18、NA STANDARDS, 19/07/2010 07:41, Uncontrolled Copy, (c) BSIBS EN ISO 11546-2:2009EN ISO 11546-2:2009 (E) 4 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC This European Standard has been prepared under a mandate given to CEN b

19、y the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive 98/37/EC, amended by 98/79/EC on machinery. Once this standard is cited in the Official Journal of the European Communities under that Directive

20、and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA re

21、gulations. WARNING - Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2010 07:41, Uncontrolled Copy, (c) BSIBS EN ISO 11546-2:2009EN ISO 11546-2:2009 (E) 5 Annex ZB (

22、informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Re

23、quirements of the New Approach Directive 2006/42/EC on machinery. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard

24、confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this st

25、andard. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2010 07:41, Uncontrolled Copy, (c) BSIBS EN ISO 11546-2:2009BS EN ISO 11546-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2010 07:41, Uncontrolled Copy, (c) BSIBS EN ISO 11546-2:2009BS EN ISO 11546-2:2009Licens

26、ed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2010 07:41, Uncontrolled Copy, (c) BSIBS EN ISO 11546-2:2009BS EN ISO 11546-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2010 07:41, Uncontrolled Copy, (c) BSIBS EN ISO 11546-2:2009BS EN ISO 11546-2:2009Licensed Copy: Wang

27、Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2010 07:41, Uncontrolled Copy, (c) BSIBS EN ISO 11546-2:2009BS EN ISO 11546-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2010 07:41, Uncontrolled Copy, (c) BSIBS EN ISO 11546-2:2009BS EN ISO 11546-2:2009Licensed Copy: Wang Bin, ISO/EXCHA

28、NGE CHINA STANDARDS, 19/07/2010 07:41, Uncontrolled Copy, (c) BSIBS EN ISO 11546-2:2009BS EN ISO 11546-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2010 07:41, Uncontrolled Copy, (c) BSIBS EN ISO 11546-2:2009BS EN ISO 11546-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STAN

29、DARDS, 19/07/2010 07:41, Uncontrolled Copy, (c) BSIBS EN ISO 11546-2:2009BS EN ISO 11546-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2010 07:41, Uncontrolled Copy, (c) BSIBS EN ISO 11546-2:2009BS EN ISO 11546-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2

30、010 07:41, Uncontrolled Copy, (c) BSIBS EN ISO 11546-2:2009BS EN ISO 11546-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2010 07:41, Uncontrolled Copy, (c) BSIBS EN ISO 11546-2:2009BS EN ISO 11546-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2010 07:41, Unc

31、ontrolled Copy, (c) BSIBS EN ISO 11546-2:2009BS EN ISO 11546-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2010 07:41, Uncontrolled Copy, (c) BSIBS EN ISO 11546-2:2009BS EN ISO 11546-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2010 07:41, Uncontrolled Copy

32、, (c) BSIBS EN ISO 11546-2:2009BS EN ISO 11546-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2010 07:41, Uncontrolled Copy, (c) BSIBS EN ISO 11546-2:2009BS EN ISO 11546-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2010 07:41, Uncontrolled Copy, (c) BSIThis

33、page deliberately left blankLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2010 07:41, Uncontrolled Copy, (c) BSIBS EN ISO11546-2:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the indep

34、endent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should make sure that they pos

35、sess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeeresponsible, the identity of

36、 which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and fo

37、reign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI policy to supply theBSI

38、 implementation of those that have been published as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European andinternational standards through its Library and its Technical Help to ExportersService. Various BSI electronic i

39、nformation services are also available whichgive details on all its products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developmentsand receive substantial discounts on the purchase p

40、rice of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British StandardsOnline can be found at http:/ information about BSI is available on the B

41、SI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in theUK, of the publications of the international standardization bodies. Except aspermitted under the Copyright, Designs and Patents Act 1988 no extract maybe reproduced, stored in a retrieval s

42、ystem or transmitted in any form or by anymeans electronic, photocopying, recording or otherwise without prior writtenpermission from BSI.This does not preclude the free use, in the course of implementing the standard,of necessary details such as symbols, and size, type or grade designations. Ifthes

43、e details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email: Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2010 07:41, Uncontrolled Copy, (c) BSI