BS EN ISO 11553-3-2013 Safety of machinery Laser processing machines Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices an .pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 11553-3:2013Safety of machinery Laser processing machinesPart 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing de

2、vices and associated auxiliary equipment (accuracy grade 2) BS EN ISO 11553-3:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 11553-3:2013.The UK participation in its preparation was entrusted to T e c h n i c a l Committee CPW/172, Optics and Photonics

3、.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI Standar

4、dsLimited 2013 ISBN 978 0 580 60029 6 ICS 13.110; 31.260 Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2013. Amendments issued since publicationDate T e

5、 x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11553-3 March 2013 ICS 31.260; 13.110 English Version Safety of machinery - Laser processing machines - Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices an

6、d associated auxiliary equipment (accuracy grade 2) (ISO 11553-3:2013) Scurit des machines - Machines laser - Partie 3: Mthodes de mesure et de rduction du bruit des machines laser, des dispositifs de traitement portatifs et des quipements auxiliaires connexes (classe de prcision 2) (ISO 11553-3:201

7、3) Sicherheit von Maschinen - Laserbearbeitungsmaschinen -Teil 3: Lrmminderungs- und Geruschmessverfahren fr Laserbearbeitungsmaschinen und handgefhrte Laserbearbeitungsgerte sowie zugehrige Hilfseinrichtungen (Genauigkeitsklasse 2) (ISO 11553-3:2013) This European Standard was approved by CEN on 1

8、March 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be o

9、btained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the

10、 CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Irel

11、and, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue

12、Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11553-3:2013: EBS EN ISO 11553-3:2013EN ISO 11553-3:2013 (E) 3 Foreword This document (EN ISO 11553-3:2013) has been prepared by Technical Committe

13、e ISO/TC 172 “Optics and photonics“ in collaboration with Technical Committee CEN/TC 123 “Lasers and photonics” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the lates

14、t by September 2013, and conflicting national standards shall be withdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or al

15、l such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this

16、document. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, F

17、rance, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 11553-3:2013 has been approved by CEN as E

18、N ISO 11553-3:2013 without any modification. BS EN ISO 11553-3:2013EN ISO 11553-3:2013 (E) 4 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the Europ

19、ean Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive 2006/42/EC on machinery. Once this standard is cited in the Official Journal of the European Union under that Directive and has been implemented as a nation

20、al standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the Essential Requirement on noise of that Directive and associated EFTA regulations. WARNING Other requirements

21、 and other EU Directives may be applicable to the product(s) falling within the scope of this standard. BS EN ISO 11553-3:2013ISO 11553-3:2013(E) ISO 2013 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope . 12 Normative references 13 Noise hazards . 24 Safety requirements and meas

22、ures 24.1 General requirements for noise reduction 24.2 Noise reduction measures . 25 Verification of safety requirements for noise emission reduction and/or protection measures . 36 Information for the user . 3Annex A (normative) Noise test code (accuracy grade 2) . 5Bibliography .12BS EN ISO 11553

23、-3:2013ISO 11553-3:2013(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested i

24、n a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commis

25、sion (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical c

26、ommittees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall no

27、t be held responsible for identifying any or all such patent rights.ISO/IEC 11553-3 was prepared by Technical Committee ISO/TC 172, Optics and photonics, Subcommittee SC 9, Electro-optical systems, in collaboration with IEC/TC 76, Optical radiation safety and laser equipment.ISO/IEC 11553 consists o

28、f the following parts, under the general title Safety of machinery Laser processing machines: Part 1: General safety requirements Part 2: Safety requirements for hand-held laser processing devices Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held proce

29、ssing devices and associated auxiliary equipment (accuracy grade 2)iv ISO 2013 All rights reservedBS EN ISO 11553-3:2013ISO 11553-3:2013(E)IntroductionThe Machinery Safety Directive issued by the Council of the EU outlines essential and mandatory requirements that must be met in order to ensure that

30、 machinery is safe. In response, CEN/CENELEC initiated a programme to produce safety standards for machines and their applications. This part of ISO/IEC 11553 is one in that series. It has been prepared as a harmonized standard to provide a means of conforming with the essential safety requirements

31、of the Machinery Directive and associated EFTA Regulations.This document is a type B standard as stated in ISO 12100. The provision of this document may be supplemented or modified by a type C standard.For machines which are covered by the scope of a type C standard and which have been designed and

32、built according to the provision of that standard, the provisions of that type C standard take precedence over the provisions of this type B standard.It is applicable to machines using laser radiation to process materials. The purpose of this part of ISO/IEC 11553 is to prevent injuries to persons b

33、y listing potential hazards generated by machines containing lasers, specifying safety measures and verifications necessary for reducing the risk caused by specific hazardous conditions, providing references to pertinent standards, and specifying the information which is to be supplied to the users

34、so that they can establish proper procedures and precautions. ISO 2013 All rights reserved vBS EN ISO 11553-3:2013BS EN ISO 11553-3:2013Safety of machinery Laser processing machines Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices a

35、nd associated auxiliary equipment (accuracy grade 2)1 ScopeThis part of ISO/IEC 11553 describes the requirements to deal with noise hazards and specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration and verification of airbor

36、ne noise emission from laser processing machines and hand-held laser processing devices within the scope of ISO/IEC 11553-1 and ISO/IEC 11553-2. It specifies the safety requirements relating to noise hazards. It specifies noise measurement methods, installation and operating conditions to be used fo

37、r the test, together with the information to be supplied by manufacturers of such equipment.This part of ISO/IEC 11553 applies to those laser processing machines and hand-held laser processing devices included in the scope of ISO/IEC 11553-1 and ISO/IEC 11553-2.Noise emission characteristics include

38、 emission sound pressure levels at work stations and the sound power level. Declared noise emission values permit comparison of laser processing machines and hand-held laser processing devices on the market.The use of this noise test code (see Annex A) ensures the reproducibility of the determinatio

39、n of the characteristic noise emission values within specific limits. These limits are determined by the accuracy grade of the noise emission measuring method used. Noise emission measurements specified by this part of ISO/IEC 11553 meet the requirements of an engineering method (accuracy grade 2).2

40、 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 3744, Acoustics Determina

41、tion of sound power levels of noise sources using sound pressure Engineering method in an essentially free field over a reflecting planeISO 3746, Acoustics Determination of sound power levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflectin

42、g planeISO 4871, Acoustics Declaration and verification of noise emission values of machinery and equipmentISO 9614-2, Acoustics Determination of sound power levels of noise sources using sound intensity Part 2: Measurement by scanningISO 11201, Acoustics Noise emitted by machinery and equipment Det

43、ermination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental correctionsISO 11202, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels

44、at a work station and at other specified positions applying approximate environmental correctionsINTERNATIONAL STANDARD ISO 11553-3:2013(E) ISO 2013 All rights reserved 1BS EN ISO 11553-3:2013ISO 11553-3:2013(E)ISO 11203:1995, Acoustics Noise emitted by machinery and equipment Determination of emiss

45、ion sound pressure levels at a work station and at other specified positions from the sound power levelISO 11204, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corr

46、ectionsISO/IEC 11553-1, Safety of machinery Laser processing machines Part 1: General safety requirementsISO/IEC 11553-2, Safety of machinery Laser processing machines Part 2: Safety requirements for hand-held laser processing devicesISO 12100:2010, Safety of machinery General principles for design

47、Risk assessment and risk reductionIEC 61672-1, Electroacoustics Sound level meters Part 1: SpecificationsEN 352-1, Hearing protectors General requirements Part 1: Ear-Muffs3 Noise hazardsNoise generated by laser processing machines and hand-held laser processing devices can result in, for example:a)

48、 permanent hearing loss;b) tinnitus;c) tiredness, stress, headaches;d) other effects such as loss of balance, loss of awareness;e) interference with speech communication;f) inability to hear acoustic warning signals.4 Safety requirements and measures4.1 General requirements for noise reductionNoise

49、reduction shall be an integral part of the design process by specifically taking into account the measures at source as suggested in ISO/TR 11688-1. The success of the applied noise reduction measures is assessed on the basis of the actual noise emission values according to the noise test code specified within this part of ISO/IEC 11553 in relation to other laser processing machines of a similar application.4.2 Noise reduction measuresAppropriate noise reduction measures shall be applie