BS EN ISO 12354-3-2017 Building acoustics Estimation of acoustic performance of buildings from the performance of elements Airborne sound insulation against outdoor sound《建筑物声学 构件性.pdf

1、Building acoustics - Estimation of acoustic performance of buildings from the performance of elementsPart 3: Airborne sound insulation against outdoor soundBS EN ISO 123543:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISC

2、HE NORM EN ISO 12354-3 August 2017 ICS 91.120.20 Supersedes EN 12354-3:2000English Version Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 3: Airborne sound insulation against outdoor sound (ISO 12354-3:2017) Acoustique du btiment - Calcul

3、 de la performance acoustique des btiments partir de la performance des lments - Partie 3: Isolement aux bruits ariens venus de lextrieur (ISO 12354-3:2017) Bauakustik - Berechnung der akustischen Eigenschaften von Gebuden aus den Bauteileigenschaften - Teil 3: Luftschalldmmung von Auenbauteilen geg

4、en Auenlrm (ISO 12354-3:2017)This European Standard was approved by CEN on 22 April 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date li

5、sts and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation unde

6、r the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Y

7、ugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION CO

8、MIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12354-3:2017 ENational forewordThis British Stand

9、ard is the UK implementation of EN ISO 123543:2017. It is identical to ISO 123543:2017. It supersedes BS EN 123543:2000, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EH/1/6, Building acoustics.A list of organizations represented on this committee ca

10、n be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 92661 7ICS 91.120.20Compl

11、iance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 123543:201

12、7EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 12354-3 August 2017 ICS 91.120.20 Supersedes EN 12354-3:2000English Version Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 3: Airborne sound insulation against outdoor sound (ISO 1

13、2354-3:2017) Acoustique du btiment - Calcul de la performance acoustique des btiments partir de la performance des lments - Partie 3: Isolement aux bruits ariens venus de lextrieur (ISO 12354-3:2017) Bauakustik - Berechnung der akustischen Eigenschaften von Gebuden aus den Bauteileigenschaften - Tei

14、l 3: Luftschalldmmung von Auenbauteilen gegen Auenlrm (ISO 12354-3:2017)This European Standard was approved by CEN on 22 April 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national sta

15、ndard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in

16、any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Re

17、public, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom

18、. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12354-

19、3:2017 EBS EN ISO 123543:2017EN ISO 12354-3:2017 (E) 3 European foreword This document (EN ISO 12354-3:2017) has been prepared by Technical Committee ISO/TC 43 “Acoustics” in collaboration with Technical Committee CEN/TC 126 “Acoustic properties of building elements and of buildings” the secretariat

20、 of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2018, and conflicting national standards shall be withdrawn at the latest by February 2018. Attention is drawn

21、to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12354-3:2000. According to the CEN-CENELEC Internal Regulations, the national standards orga

22、nizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,

23、 Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 12354-3:2017 has been approved by CEN as EN ISO 12354-3:2017 without any modification. ISO 12354-3:2017(E)ForewordISO (the

24、 International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committe

25、e has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechni

26、cal standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in

27、 accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights

28、. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constit

29、ute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso

30、/ foreword .html.This document was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 126, Acoustic properties of building elements and of buildings, in collaboration with ISO Technical Committee TC 43, Acoustics, SC 2, Building acoustics, in accordance with the

31、agreement on technical cooperation between ISO and CEN (Vienna Agreement).This first edition cancels and replaces ISO 15712-3:2005, which has been technically revised. A list of all the parts in the ISO 12354 series can be found on the ISO website.iv ISO 2017 All rights reservedBS EN ISO 123543:2017

32、ISO 12354-3:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a sub

33、ject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (I

34、EC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be

35、noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identi

36、fying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the conven

37、ience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see th

38、e following URL: www .iso .org/ iso/ foreword .html.This document was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 126, Acoustic properties of building elements and of buildings, in collaboration with ISO Technical Committee TC 43, Acoustics, SC 2, Building

39、 acoustics, in accordance with the agreement on technical cooperation between ISO and CEN (Vienna Agreement).This first edition cancels and replaces ISO 15712-3:2005, which has been technically revised. A list of all the parts in the ISO 12354 series can be found on the ISO website.iv ISO 2017 All r

40、ights reservedBS EN ISO 123543:2017ISO 12354-3:2017(E)IntroductionThis document is part of a series specifying calculation models in building acoustics.Although this document covers the main types of building construction it cannot as yet cover all variations in the construction of buildings. It set

41、s out an approach for gaining experience for future improvements and developments.The accuracy of this standard can only be specified in detail after widespread comparisons with field data, which can only be gathered over a period of time after establishing the prediction model. To help the user in

42、the meantime, indications of the accuracy have been given, based on earlier comparisons with comparable prediction models. It is the responsibility of the user (i.e. a person, an organization, the authorities) to address the consequences of the accuracy, inherent for all measurement and prediction m

43、ethods, by specifying requirements for the input data and/or applying a safety margin to the results or applying some other correction.It is intended for acoustical experts and provides the framework for the development of application documents and tools for other users in the field of building cons

44、truction, taking into account local circumstances.The model is based on experience with predictions for dwelling; it can also be used for other types of buildings provided the dimensions of constructions are not too different from those in dwellings. ISO 2017 All rights reserved vBS EN ISO 123543:20

45、17ISO 12354-3:2017(E)IntroductionThis document is part of a series specifying calculation models in building acoustics.Although this document covers the main types of building construction it cannot as yet cover all variations in the construction of buildings. It sets out an approach for gaining exp

46、erience for future improvements and developments.The accuracy of this standard can only be specified in detail after widespread comparisons with field data, which can only be gathered over a period of time after establishing the prediction model. To help the user in the meantime, indications of the

47、accuracy have been given, based on earlier comparisons with comparable prediction models. It is the responsibility of the user (i.e. a person, an organization, the authorities) to address the consequences of the accuracy, inherent for all measurement and prediction methods, by specifying requirement

48、s for the input data and/or applying a safety margin to the results or applying some other correction.It is intended for acoustical experts and provides the framework for the development of application documents and tools for other users in the field of building construction, taking into account loc

49、al circumstances.The model is based on experience with predictions for dwelling; it can also be used for other types of buildings provided the dimensions of constructions are not too different from those in dwellings. ISO 2017 All rights reserved vBS EN ISO 123543:2017Building acoustics Estimation of acoustic performance of buildings from the performance of elements Part 3: Airborne sound insulation against outdoor sound1 ScopeThis document specifies a calculation model to estimate the sound insulation or the sound pre