BS EN ISO 12543-2-2011 Glass in building Laminated glass and laminated safety glass Laminated safety glass《建筑物内玻璃 夹层玻璃和夹层安全玻璃 夹层安全玻璃》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 12543-2:2011Glass in building Laminatedglass and laminated safetyglassPart 2: Laminated safety glass (ISO12543-2:2011)BS EN ISO 12543-2:2011 BRITISH STANDARDNational fo

2、rewordThis British Standard is the UK implementation of EN ISO 12543-2:2011. It supersedes BS EN ISO 12543-2:1998 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/520/1, Basic and transformed glass products.A list of organizations represented on this

3、committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 60142 2 ICS 81.040.20 Compliance with a British Standard cannot confer immunity fr

4、om legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2011.Amendments issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 12543-2 August 2011 ICS 81.040.20 Supe

5、rsedes EN ISO 12543-2:1998English Version Glass in building - Laminated glass and laminated safety glass -Part 2: Laminated safety glass (ISO 12543-2:2011) Verre dans la construction - Verre feuillet et verre feuillet de scurit - Partie 2: Verre feuillet de scurit (ISO 12543-2:2011) Glas im Bauwesen

6、 - Verbundglas und Verbund-Sicherheitsglas - Teil 2: Verbund-Sicherheitsglas (ISO 12543-2:2011) This European Standard was approved by CEN on 6 August 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the

7、status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French

8、, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, C

9、roatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDA

10、RDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12543-2:2011: EBS EN ISO 12543-2:2011EN ISO 12543

11、-2:2011 (E) 3 Foreword This document (EN ISO 12543-2:2011) has been prepared by Technical Committee ISO/TC 160 “Glass in building“ in collaboration with Technical Committee CEN/TC 129 “Glass in building” the secretariat of which is held by NBN. This European Standard shall be given the status of a n

12、ational standard, either by publication of an identical text or by endorsement, at the latest by February 2012, and conflicting national standards shall be withdrawn at the latest by February 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of

13、 patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 12543-2:1998. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this

14、 European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland

15、and the United Kingdom. Endorsement notice The text of ISO 12543-2:2011 has been approved by CEN as a EN ISO 12543-2:2011 without any modification. BS EN ISO 12543-2:2011ISO 12543-2:2011(E) ISO 2011 All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwi

16、de federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on tha

17、t committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in a

18、ccordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard re

19、quires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 12543-2 was prepared by Tec

20、hnical Committee ISO/TC 160, Glass in building, Subcommittee SC 1, Product considerations. This second edition cancels and replaces the first edition (ISO 12543-2:2004), which has been technically revised. ISO 12543 consists of the following parts, under the general title Glass in building Laminated

21、 glass and laminated safety glass: Part 1: Definitions and description of component parts Part 2: Laminated safety glass Part 3: Laminated glass Part 4: Test methods for durability Part 5: Dimensions and edge finishing Part 6: Appearance BS EN ISO 12543-2:2011BS EN ISO 12543-2:2011INTERNATIONAL STAN

22、DARD ISO 12543-2:2011(E) ISO 2011 All rights reserved 1Glass in building Laminated glass and laminated safety glass Part 2: Laminated safety glass 1 Scope This part of ISO 12543 specifies performance requirements for laminated safety glass as defined in ISO 12543-1. 2 Normative references The follow

23、ing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 12543-1, Glass in building Laminated glass and laminate

24、d safety glass Part 1: Definitions and description of component parts ISO 12543-4:2011, Glass in building Laminated glass and laminated safety glass Part 4: Test methods for durability ISO 12543-5, Glass in building Laminated glass and laminated safety glass Part 5: Dimensions and edge finishing ISO

25、 12543-6, Glass in building Laminated glass and laminated safety glass Part 6: Appearance EN 12600, Glass in building Pendulum test Impact test method and classification for flat glass 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 12543-1 and the f

26、ollowing apply. 3.1 delamination usually a two-dimensional visual effect which is caused by local loss of adhesion between the glass or plastic glazing material and the interlayer NOTE Local total loss of adhesion between the glass or plastic glazing material and the interlayer leads to a local incr

27、ease of light reflection. 3.2 bubble usually a three-dimensional visual effect which is caused by gaseous inclusions in the interlayer or at the interface between glass and interlayer BS EN ISO 12543-2:2011ISO 12543-2:2011(E) 2 ISO 2011 All rights reserved3.3 haze scattering of incident light by a s

28、pecimen resulting in a reduction of direct light transmittance and the contrast of objects viewed through the glass 3.4 cloudiness local variation in the scattering of incident light by a specimen resulting in a reduction of direct light transmittance and the contrast of objects viewed through the g

29、lass 3.5 discoloration significant change of colour of a laminated safety glass, caused by oxidization processes in the interlayer NOTE In clear interlayers, discoloration is usually perceived as yellowing. 4 Impact resistance Laminated safety glass is distinguished from laminated glass by its perfo

30、rmance under a pendulum impact test and its subsequent classification. NOTE ISO/TS 29584, detailing two methods of pendulum impact testing, is available. The publication of an International Standard on impact testing and classification of glass products is expected in the future. In the absence of a

31、n appropriate International Standard for impact testing glass products, the following applies: in non-CEN ISO member states, laminated safety glass should be classified in accordance with appropriate national standards or EN 12600; in CEN member states, laminated safety glass should be classified to

32、 a minimum of 3(B)3 in accordance with EN 12600. 5 Durability of laminated safety glass and laminated safety glass with fire-resistant properties 5.1 High-temperature test 5.1.1 General Durability of laminated safety glass is dependent upon the following factors: interlayer type; presence of plastic

33、 glazing sheet materials; presence of encapsulated materials. The choice of test method is dependent upon the above-mentioned factors. Laminated safety glass not incorporating plastic glazing sheet materials shall be tested in accordance with 5.1.2. Laminated safety glass incorporating plastic glazi

34、ng sheet materials and/or encapsulated materials shall be tested in accordance with 5.1.3. BS EN ISO 12543-2:2011ISO 12543-2:2011(E) ISO 2011 All rights reserved 3NOTE A manufacturer can choose to test laminated safety glass incorporating encapsulated materials in accordance with 5.1.2. 5.1.2 Lamina

35、ted safety glass that does not include plastic glazing materials Laminated safety glass shall be tested in accordance with ISO 12543-4:2011, 5.3.2, and evaluated in accordance with ISO 12543-4:2011, 5.4. No fault (i.e. bubbles, delamination, haze or cloudiness) shall be found in three test specimens

36、. If faults are found in only one test specimen, three new test specimens shall be tested in accordance with ISO 12543-4:2011, 5.3.2, and evaluated in accordance with ISO 12543-4:2011, 5.4. No fault shall be found in any of these three test specimens. 5.1.3 Laminated safety glass that includes plast

37、ic glazing materials and/or encapsulated material Laminated safety glass shall be tested in accordance with ISO 12543-4:2011, 5.3.3, and evaluated in accordance with ISO 12543-4:2011, 5.4. No fault (i.e. bubbles, delamination, haze or cloudiness) shall be found in three test specimens. If faults are

38、 found in only one test specimen, three new test specimens shall be tested in accordance with ISO 12543-4:2011, 5.3.3, and evaluated in accordance with ISO 12543-4:2011, 5.4. No fault shall be found in any of these three test specimens. 5.2 Humidity test Laminated safety glass shall be tested in acc

39、ordance with ISO 12543-4:2011, 6.3.1, and evaluated in accordance with ISO 12543-4:2011, 6.4. No fault (i.e. bubbles, delamination, haze or cloudiness) shall be found in three test specimens. If faults are found in only one test specimen, three new test specimens shall be tested in accordance with I

40、SO 12543-4:2011, 6.3.1, and evaluated in accordance with ISO 12543-4:2011, 6.4. No fault shall be found in any of these three test specimens. 5.3 Radiation test Laminated safety glass shall be tested in accordance with ISO 12543-4:2011, Clause 7, and evaluated in accordance with ISO 12543-4:2011, 7.

41、5.1. The luminous transmittance of three irradiated test specimens shall not change by more than a) 3 % of their value before exposure for initial light transmittances of greater than 65 %, or b) 2 % of their absolute value for initial light transmittances of less than or equal to 65 %. When visuall

42、y inspected, no fault (i.e. bubbles, delamination, haze or cloudiness) shall be found in the three irradiated test specimens. If faults are found in only one test specimen, three new test specimens shall be tested in accordance with ISO 12543-4:2011, Clause 7, and evaluated in accordance with ISO 12

43、543-4:2011, 7.5.1. No fault shall be found in any of these three test specimens. BS EN ISO 12543-2:2011ISO 12543-2:2011(E) 4 ISO 2011 All rights reserved6 Durability of fire-resistant laminated safety glass 6.1 General The durability of fire-resistant laminated safety glass is dependent upon its exp

44、osure to direct solar radiation. NOTE 1 Fire-resistant laminated safety glass glazed externally is subject to direct solar radiation. NOTE 2 Fire-resistant laminated safety glass glazed internally is not normally subject to direct solar radiation. Fire-resistant laminated safety glass not normally e

45、xposed to direct solar radiation shall comply with 6.2. Fire-resistant laminated safety glass normally exposed to direct solar radiation shall comply with 6.3. 6.2 Humidity test for glass that is not normally exposed to direct solar radiation Fire-resistant laminated safety glass shall be tested in

46、accordance with ISO 12543-4:2011, 6.3.2, and evaluated in accordance with ISO 12543-4:2011, 6.4. No delamination shall be found in three test specimens. If delamination is found in only one test specimen, three new test specimens shall be tested in accordance with ISO 12543-4:2011, 6.3.2, and evalua

47、ted in accordance with ISO 12543-4:2011, 6.4. No fault shall be found in any of these three test specimens. 6.3 Tests for glass that is normally exposed to direct solar radiation 6.3.1 Humidity test Fire-resistant laminated safety glass shall be tested in accordance with ISO 12543-4:2011, 6.3.1, and

48、 evaluated in accordance with ISO 12543-4:2011, 6.4. No delamination shall be found in three test specimens. If delamination is found in only one test specimen, three new test specimens shall be tested in accordance with ISO 12543-4:2011, 6.3.1, and evaluated in accordance with ISO 12543-4:2011, 6.4

49、. No fault shall be found in any of these test specimens. 6.3.2 Radiation test Fire-resistant laminated safety glass shall be tested in accordance with ISO 12543-4:2011, Clause 7, and evaluated in accordance with ISO 12543-4:2011, 7.5.2. No delamination shall be found in three test specimens. If delamination is found in only one test specimen, three new test specimens shall be tested in accordance with ISO 12543-4:2011, Clause 7, and evaluated in accordance with ISO 12543-4:2011, 7.5.2. No fault shall b