BS EN ISO 13130-2011 Laboratory glassware Desiccators《实验室玻璃仪器 烘干器》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 13130:2011Laboratory glassware Desiccators (ISO 13130:2011)BS EN ISO 13130:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN IS

2、O13130:2011.The UK participation in its preparation was entrusted to TechnicalCommittee LBI/36, Laboratory glassware and related apparatus.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessarypr

3、ovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 68042 7ICS 71.040.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee o

4、n 31 August 2011.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 13130 July 2011 ICS 71.040.20; 11.100.01 English Version Laboratory glassware - Desiccators (ISO 13130:2011) Verrerie de laboratoire - Dessicateurs (ISO 13130:2011) Laborger

5、te aus Glas - Exsikkatoren (ISO 13130:2011) This European Standard was approved by CEN on 14 July 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

6、 Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by tr

7、anslation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Fin

8、land, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES

9、KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 13130:2011: EBS EN ISO 13130:2011EN ISO 13130:2011 (E) 3 Foreword This document (EN ISO 13130:2011) ha

10、s been prepared by Technical Committee ISO/TC 48 “Laboratory equipment“ in collaboration with Technical Committee CEN/TC 332 “Laboratory equipment” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical

11、text or by endorsement, at the latest by January 2012, and conflicting national standards shall be withdrawn at the latest by January 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held respo

12、nsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finla

13、nd, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 13130:2011 has been approved by CEN as a EN I

14、SO 13130:2011 without any modification. BS EN ISO 13130:2011ISO 13130:2011(E) ISO 2011 All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is

15、 normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part

16、 in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to pr

17、epare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that

18、 some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 13130 was prepared by Technical Committee ISO/TC 48, Laboratory equipment, Subcommittee SC 6, Glass and plastics ware including volumetric

19、instruments. BS EN ISO 13130:2011BS EN ISO 13130:2011INTERNATIONAL STANDARD ISO 13130:2011(E) ISO 2011 All rights reserved 1Laboratory glassware Desiccators 1 Scope This International Standard specifies requirements and tests for desiccators and vacuum desiccators intended for general laboratory pur

20、poses such as drying of substances or material. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any

21、 amendments) applies. ISO 383, Laboratory glassware Interchangeable conical ground joints ISO 718, Laboratory glassware Thermal shock and thermal shock endurance Test methods ISO 3585, Borosilicate glass 3.3 Properties 3 Types Two types of desiccators are specified in this International Standard. Ty

22、pe 1 Vacuum desiccators Type 2 Non-vacuum desiccators 4 Nominal sizes and series Desiccators shall have the following nominal sizes and dimensions. Series A Nominal sizes 100, 150, 200, 250 and 300 mm Dimensions in accordance with Table 1 Series B Nominal sizes 100, 110, 150, 160, 200, 250 and 300 m

23、m Dimensions in accordance with Table 2 5 Designation Desiccators in accordance with this International Standard shall be designated by their nominal size followed by the type and the series. Designation of a vacuum desiccator with nominal size of 200 mm, Type 1, Series B: Desiccator ISO 13130 200 1

24、B BS EN ISO 13130:2011ISO 13130:2011(E) 2 ISO 2011 All rights reservedIf bodies (item no. 1) and lids (item no. 2) are ordered separately, the following designations shall be used. Designation of a body (item no. 1) of nominal diameter 200 mm, Type 1, Series B: Desiccator body ISO 13130 200 1B 1 Des

25、ignation of a lid (item no. 2) of nominal diameter 200 mm, Type 1, Series B: Desiccator lid ISO 13130 200 1B 2 6 Material Desiccators shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from defects which might impair safet

26、y, durability or appearance. The glass shall not have pronounced deviations from the prevailing tint. To protect light-sensitive substances, the surface of the glass may be coloured brown. 7 Dimensions Desiccators shall comply with the dimensions specified in Table 1 for Series A and in Table 2 for

27、Series B. Key 1 opening for vacuum 2 lid (item no. 2) 3 body (item no. 1) 4 desiccator plate 5 base (picked) Figure 1 Vacuum desiccator (example) BS EN ISO 13130:2011ISO 13130:2011(E) ISO 2011 All rights reserved 3Figure 2 Non-vacuum desiccator (example) NOTE The designation of dimensions in Figure

28、2 is the same as in Figure 1. Table 1 Dimensions for Series A desiccators Dimensions in millimetres Nominal size b min. d1 2 d2min. d3 h1max. h2Tamax. h2Kbmax. h3min. s min. 100 13 153 92 70 115 65 80 63 4 150 16 215 143 100 160 90 105 87 5 200 18 270 192 145 205 100 110 121 6 250 18 320 239 180 240

29、 115 130 127 7 300 18 380 285 220 290 145 155 157 8cah2T= height of lid with tube or screw thread (vacuum desiccators). bh2K= height of lid with knob (non-vacuum desiccators). cFor nominal size 300, the wall thickness of the lid may be reduced to 7 mm. Table 2 Dimensions for Series B desiccators Dim

30、ensions in millimetres Nominal size b min. d1 3 d2min. d3min. h1max. h2amax. h3max. s min. 100 13 155 95 65 115 55 60 4 110 13 160 100 70 110 75 70 5 150 16 195 140 115 160 95 85 5 160 16 200 145 120 161 100 110 6 200 16 270 180 125 205 115 120 6 250 20 330 230 160 240 138 135 7 300 22 380 280 185 2

31、85 140 151 8b ah2applies for vacuum desiccators of the sleeve type. bFor nominal size 300, the wall thickness of the lid may be reduced to 7 mm. BS EN ISO 13130:2011ISO 13130:2011(E) 4 ISO 2011 All rights reserved8 Construction 8.1 Basic requirements Desiccators shall be regular in shape (see Figure

32、 1 and Figure 2) and smoothly finished. They shall be symmetrical about the axis which shall be perpendicular to the thought plane of the base. 8.2 Base Desiccators shall have a slightly concave base enabling the desiccator to stand vertically without rocking or spinning on a plane horizontal surfac

33、e. To increase the stability and protection against mechanical damage or cracking, extra glass may be provided externally to form a protective rim at the base, and/or the outer surface of the base shall be picked along the circumference. 8.3 Side The side of the desiccators shall be stepped to accom

34、modate perforated desiccator plates (e.g. in accordance with national standards) without rocking, in a plane parallel to the base. The upper part of the side above the step shall rise in the approximate form of a vertical slightly tapered cylinder and end in a horizontal flat flange. See Figure 1 an

35、d Figure 2. 8.4 Lid The lid of desiccator shall be part-spherical in shape. Its rim shall form a flat flange the surface of contact of which shall match that of the flat flange of the body of the desiccator evenly. The lid shall be provided at the top either with a vacuum connection or with a knob o

36、f minimum diameter 38 mm for ease of handling. The knob may be solid or hollow. 8.5 Flat flange and tightness The vacuum-tight surfaces of the flanges of the body and the lid shall be separately ground plane so that they are interchangeable. They shall be ground fine so that the assembled desiccator

37、, or its body or lid when tested separately, complies with the following requirement. The leakage rate of closed desiccators shall not exceed 3 mbar l s1. This is to be tested with paired bodies and lids, selected at random and with the flange face dry, in accordance with national or International S

38、tandards. The flat flange of the body may be furnished with a ring-groove to incorporate a matching elastomeric seal. 8.6 Vacuum connection Desiccators of Type 1 shall have an opening for vacuum connection located either in the top centre of the lid or in the side wall of the body at a height equal

39、to h1(see Figure 1). The opening for the vacuum connection shall have the form of a conical ground glass socket size 24/29 in accordance with ISO 383, or of an external screw thread in accordance with suitable national or International Standards, or of a socket for take-up of a rubber stopper, or BS

40、 EN ISO 13130:2011ISO 13130:2011(E) ISO 2011 All rights reserved 5 of a ground knob with a sleeve and tube in alignment with the opening in the knob. The bore size shall be minimum 2 mm and the internal diameter of the tube shall match the bore size. 8.7 Pressure strength Vacuum desiccators (Type 1)

41、 shall be capable of resisting an external pressure of 2 bar for 60 s or an external pressure of 3 bar for 10 s. Testing shall be conducted in accordance with Annex A. 8.8 Protective coating For protection against mechanical damage (impact or shock), the body and lid of desiccators may have an exter

42、nal plastic coating. 9 Thermal shock endurance Desiccators shall be type tested to comply with a thermal shock endurance of 80 C in accordance with ISO 718. 10 Marking and packaging 10.1 Desiccators shall be permanently and legibly marked on the body and the lid with the following: a) manufacturers

43、and/or suppliers name and/or trade mark; b) nominal size or designation; c) type (vacuum or non-vacuum desiccator); d) optionally the number of this International Standard, “ISO 13130”. 10.2 Desiccators shall be packed individually as agreed to between the purchaser and the supplier to protect them

44、from damage during transit and storage. 11 Appearance of used desiccators Before a vacuum is applied to the desiccator, it shall always be checked visually to verify that its internal and external surfaces are free from defects such as chipping, cracks or grooves. Particular attention shall be paid

45、to the base and to the side wall at the step. Damaged desiccators shall not be used. BS EN ISO 13130:2011ISO 13130:2011(E) 6 ISO 2011 All rights reservedAnnex A (normative) Type test for pressure strength A.1 General The desiccator is tested in a pressure vessel by subjecting it to a hydraulic exter

46、nal pressure of 2 bar for 1 min or an external pressure of 3 bar for 10 s. A.2 Apparatus A.2.1 Pressure vessel, with a pressure gauge connected to a water reservoir fitted with a ram pump and a release valve discharging back into the reservoir. The lid of the pressure vessel can be fastened to the v

47、essel by means of wing nuts for ease of operation. The recommended apparatus is illustrated in Figure A.1. A.3 Procedure Assemble the desiccator after cleaning and greasing the flange faces (and the cone and socket in case of Type 1) and close the desiccator at atmospheric pressure. To ensure submer

48、sion, hold the desiccator in the pressure vessel in some holding device or, alternatively, place weights wrapped in paper or cloth inside it. Having placed the desiccator in position and fastened the lid, fill the pressure vessel with water and bring up the pressure to 2 bar by working the ram pump

49、and release it immediately after 1 min. A.4 Result The desiccator shall be considered to have satisfied the requirement of the test if it withstands the pressure of 2 bar for 1 min. Alternatively, the test may be performed at 3 bar for 10 s. BS EN ISO 13130:2011ISO 13130:2011(E) ISO 2011 All rights reserved 7Key 1 pressure relief valve 2 funnel 3 pressure gauge 4 pump 5 valves 6 reservoir Figure A.1 Test rig for pressure strength This page deliberately left blankThis page delibe