BS EN ISO 15749-2-2004 Ships and marine technology - Drainage systems on ships and marine structures - Sanitary drainage drain piping for gravity system《船舶和海洋技术 船舶和海上结构物的排水系统 自流输送系.pdf

1、BRITISH STANDARD BS EN ISO 15749-2:2004 Ships and marine technology Drainage systems on ships and marine structures Part 2: Sanitary drainage, drain piping for gravity system The European Standard EN ISO 15749-2:2004 has the status of a British Standard ICS 47.020.30 BS EN ISO 15749-2:2004 This Brit

2、ish Standard was published under the authority of the Standards Policy and Strategy Committee on 10 June 2004 BSI 10 June 2004 ISBN 0 580 43904 6 National foreword This British Standard is the official English language version of EN ISO 15749-2:2004. It is identical with ISO 15749-2:2004. The UK par

3、ticipation in its preparation was entrusted by Technical Committee SME/32, Ships and marine technology, to Subcommittee SME/32/3, Piping and machinery, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-referen

4、ces The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British S

5、tandards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to

6、the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside

7、front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to iv, pages 1 to 9 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD

8、 NORMEEUROPENNE EUROPISCHENORM ENISO157492 May2004 ICS47.020.30 Englishversion ShipsandmarinetechnologyDrainagesystemsonshipsand marinestructuresPart2:Sanitarydrainage,drainpipingfor gravitysystem(ISO157492:2004) NaviresettechnologiemaritimeInstallationsdedrainage surnaviresetstructuresmaritimesPart

9、ie2:Drainage sanitaire,tuyauxdedrainagepoursystmepargravit(ISO 157492:2004) SchiffeundMeerestechnikEntwsserungsanlagenauf SchiffenundSeebauwerkenTeil2:Sanitr Entwsserung,AbflussleitungenimFallsystem(ISO15749 2:2004) ThisEuropeanStandardwasapprovedbyCENon16April2004. CENmembersareboundtocomplywiththe

10、CEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardex

11、istsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic

12、,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG

13、 ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.ENISO157492:2004:E I NESO 51-947:2002( 4E) 2 Foreword This document (EN ISO 15749-2:2004) has been prepared by Technical Committee ISO/TC 8 “Ships and

14、marine technology“ in collaboration with Technical Committee CEN/TC 300 “Sea- going vessels and marine technology“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the l

15、atest by November 2004, and conflicting national standards shall be withdrawn at the latest by November 2004. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Cz

16、ech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 15749-2:2004 has been

17、 approved by CEN as EN ISO 15749-2:2004 without any modifications. ENISO157492:2004 Reference number ISO 15749-2:2004(E) OSI 4002INTERNATIONAL STANDARD ISO 15749-2 First edition 2004-05-01 Ships and marine technology Drainage systems on ships and marine structures Part 2: Sanitary drainage, drain pi

18、ping for gravity systems Navires et technologie maritime Installations de drainage sur navires et structures maritimes Partie 2: Drainage sanitaire, tuyaux de drainage pour systme par gravit ENISO157492:2004IS-94751 O2:(4002E) DPlcsid Fremia ihTs PDF file may ctnoian emdebt dedyfepcaes. In ccaocnadr

19、w eith Aebods licensilop gnic,y this file mairp eb ynted iv roweb detu slahl ton ide ebtlnu deess the typefaces whice era hml era deddebicsnede to i dnanstlaled t noeh computfrep reormign tide ehtin.g In wodlnidaot gnhis file, trapise atpecc tiereht nser ehnopsiiblity fo not infriigngn Aebods licens

20、ilop gnic.y ehT ISO tneClar Secrteiraat caceptl on siibality in this .aera Ai ebods a tredamafo kr Aebod SystemI sncotaropr.de teDails fo teh softwacudorp erts sut deo crtaee this PDF file cna f ebi dnuon tlareneG eh Info leratit evo the file; tP ehDc-Frtaeion marapterew setpo erimizde for irpnti.gn

21、 Evyre caer neeb sah taken to sneeru that the file is suitlbae fosu re yb ISO memdob rebeis. In tlnu ehikletneve y ttah lborp aem leratit gno it is f,dnuo plsaee inform ttneC ehlar Secrteiraat ta the serddaig sleb nevwo. ISO 4002 All irthgs erse.devr lnUeto sswrehise specified, on trap fo this lbupi

22、ctaion maeb y cudorperro de tuilizi den yna form ro na ybm ynae,s lecetrinoc ro mecinahcal, inclidung tohpcoiypodna gn micrfoilm, wittuoh repmissii non writign from ietI rehSa Ot tsserdda eh ebolw or ISOs memreb i ydobn the cnuotrfo y ttseuqer ehe.r ISO cirypothg fofice saCe tsopale 65 eneG 1121-HC

23、02 av leT. 4 + 10 947 22 1 11 xaF0 947 22 14 + 9 74 E-mail coirypthgiso.o gr We bwww.is.o gro Pulbisdehi n Switlrez dnaii ISO 4002 Allr ithgsr esedevrENISO157492:2004IS-94751 O2:(4002E) I SO 4002 All irthgs ersedevr iiiContents Page Foreword iv 1 Scope 1 2 Normative references . 1 3 Terms and defini

24、tions. 2 4 Gravity systems 2 5 Pipes. 2 6 Laying of drain lines . 4 7 Determination of nominal bores 5 8 Collector tank and sewage treatment plant 7 9 Testing and operation of pipes 7 10 Disposal . 7 11 Example of wastewater system . 8 ENISO157492:2004IS-94751 O2:(4002E) iv I SO 4002 All irthgs erse

25、devrForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which

26、 a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all mat

27、ters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circu

28、lated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsi

29、ble for identifying any or all such patent rights. ISO 15749-2 was prepared by Technical Committee ISO/TC 8, Ships and marine technology, Subcommittee SC 3, Piping and machinery. ISO 15749 consists of the following parts, under the general title Ships and marine technology Drainage systems on ships

30、and marine structures: Part 1: Sanitary drainage-system design Part 2: Sanitary drainage, drain piping for gravity systems Part 3: Sanitary drainage, drain piping for vacuum systems Part 4: Sanitary drainage, sewage disposal pipes Part 5: Drainage of decks, cargo spaces and swimming pools ENISO15749

31、2:2004INTENRATIONAL TSANDADR IS-94751 O2:(4002E)I SO 4002 All irthgs ersedevr 1Ships and marine technology Drainage systems on ships and marine structures Part 2: Sanitary drainage, drain piping for gravity systems 1 Scope This part of ISO 15749 applies to the design of sanitary drain lines in gravi

32、ty systems (gravity drainage) on ships and marine structures. For planning and basic requirements, see ISO 15749-1. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated refe

33、rences, the latest edition of the referenced document (including any amendments) applies. IMO Resolution A.753 (18), Guidelines for the application of plastic pipes on ships 1)ISO 65, Carbon steel tubes suitable for screwing in accordance with ISO 7-1 ISO 4200, Plain end steel tubes, welded and seam

34、less General tables of dimensions and masses per unit length ISO 7268, Pipe components Definition of nominal pressure ISO 9329-1, Seamless steel tubes for pressure purposes Technical delivery conditions Part 1: Unalloyed steels with specific room temperature properties ISO 9330-1, Welded steel tubes

35、 for pressure purposes Technical delivery conditions Part 1: Unalloyed steel tubes with specified room temperature properties ISO 15749-1, Ships and marine technology Drainage systems on ships and marine structures Part 1: Sanitary drainage-system design ISO 15749-4, Ships and marine technology Drai

36、nage systems on ships and marine structures Part 4: Sanitary drainage, sewage disposal pipes 1) Published by International Maritime Organization, London. Available from IMO Secretariat, Publications Section, 101-104 Piccadilly, London W1V, United Kingdom. ENISO157492:2004IS-94751 O2:(4002E) 2 I SO 4

37、002 All irthgs ersedevr3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 15749-1 apply. 4 Gravity systems 4.1 Description 4.1.1 Drain lines in gravity systems convey wastewater by gravity to a collector tank or sewage treatment plant. 4.1.2 Wastewater

38、lines downstream of the sewage treatment plant are not part of the gravity system. For their configuration, ISO 15749-4 applies. 4.1.3 Figure 1 gives an example of a drainage system with drain lines in a gravity system. 4.2 Operating pressure Pipes in sanitary systems (drain and vent lines) shall be

39、 designed such that the operating pressure 2)(internal pressure) cannot exceed 0,5 bar. 5 Pipes 5.1 General Depending on the location, the following pipes may be used for gravity drain lines and vent lines: steel pipes in accordance with 5.2; steel pipes and CuNiFe pipes with spigot and socket joint

40、s 3)in accordance with 5.3; CuNiFe pipes in accordance with 5.4; PVC-U pipes in accordance with 5.5; plastic pipes shall be approved in accordance with IMO Resolution A.753 (18). For nominal bores see Table 1. Table 1 Nominal bores for drain lines Nominal bore, NB 32 40 50 65 70 80 100 125 150 Steel

41、 and CuNiFe pipes X X X X X X X X Spigot and socket pipes X X X X X X X PVC-U pipes X X X X X X X X X: NB possible for this type of pipe; : NB not possible for this type of pipe. 2) For definitions see ISO 7268. 3) Hereinafter referred to as spigot and socket pipes. ENISO157492:2004IS-94751 O2:(4002

42、E) I SO 4002 All irthgs ersedevr 35.2 Steel pipes The following types of pipes are applicable: seamless steel pipes in accordance with ISO 4200 and ISO 9329-1, of S 235 JR; welded steel pipes in accordance with ISO 4200 and ISO 9330-1, of S 235 JR; threaded steel pipes in accordance with ISO 65, of

43、S 185. For dimensions see Table 2. Table 2 Dimensions of steel pipes Nominal bore, NB 32 40 50 65 80 100 125 150 Outside diameter of pipe d mm 42,4 48,3 60,3 76,1 88,9 114,3 139,7 168,3 A mm 4,5 B mm 6,3 7,1 8 8,8 Wall thickness s minN mm 2,3 2,6 2,9 3,2 3,6 4 NOTE Other minimum wall thicknesses acc

44、ording to the requirements of a classification society may be considered. For selection of wall thickness series depending on the location, see Table 3. Table 3 Wall-thickness series depending on the location Location Wall thickness series Tanks with same medium A Tanks with different medium aB Pipe

45、s below freeboard deck or bulkhead deck leading to an overboard wastewater outlet with closing devices A Above freeboard deck N Cargo space B a Permitted only upon agreement of the classification society.5.3 Spigot and socket pipes Spigot and socket pipes with dimensions in accordance with Table 4 a

46、re applicable. Also, CuNi10Fe1,6Mn pipes with these dimensions are applicable. Employment only in those areas where steel pipes of wall-thickness series N in accordance with Table 3 are permitted. Table 4 Dimensions of spigot and socket pipes Nominal bore, NB 40 50 70 80 100 125 150 Outside diameter

47、 d mm 42 53 73 89 102 (103) 133 159 Wall thickness s minmm 1,5 1,6 (1,5) 2 (1,5) 2,5 (2) 2,5 Values in brackets are for stainless spigot and socket pipes. ENISO157492:2004IS-94751 O2:(4002E) 4 I SO 4002 All irthgs ersedevr5.4 CuNiFe pipes Pipes of CuNi10Fe1,6Mn with dimensions in accordance with Tab

48、le 5 are applicable. For selection of the wall-thickness series depending on the location, see Table 3. Table 5 Dimensions of CuNiFe pipes Nominal bore, NB 32 40 50 65 80 100 125 150 Outside diameter d mm 38 44,5 57 76 89 108 133 159 A 2,5 3 3,5 3,5 4 4 Wall thickness s minB 4 5 6 6 N 2 2,5 NOTE Other minimum wall thicknesses in accordance with the requirements of the relevant classification society