BS EN ISO 15876-3-2017 Plastics piping systems for hot and cold water installations Polybutene (PB) Fittings《冷热水装置用塑料管道系统 聚丁烯 配件》.pdf

1、BS EN ISO 15876-3:2017Plastics piping systems for hotand cold water installations Polybutene (PB)Part 3: Fittings (ISO 15876-3:2017)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN ISO 15876-3:2017 BRITISH STANDARDNational forewordThis British Standard is the UK

2、 implementation of EN ISO 15876-3:2017. It supersedes BS EN ISO 15876-3:2003 which iswithdrawn.The UK participation in its preparation was entrusted to Technical Committee PRI/88/2, Plastics piping for pressure applications.A list of organizations represented on this committee can be obtained on req

3、uest to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 90297 0 ICS 23.040.45; 91.140.60 Compliance w

4、ith a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2017.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE

5、EUROPISCHE NORM EN ISO 15876-3 February 2017 ICS 23.040.45; 91.140.60 Supersedes EN ISO 15876-3:2003English Version Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017) Systmes de canalisations en plastique pour les installations deau c

6、haude et froide - Polybutne (PB) -Partie 3: Raccords (ISO 15876-3:2017) Kunststoff-Rohrleitungssysteme fr die Warm- und Kaltwasserinstallation - Polybuten (PB) - Teil 3: Formstcke (ISO 15876-3:2017) This European Standard was approved by CEN on 24 December 2016. CEN members are bound to comply with

7、the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Managem

8、ent Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same statu

9、s as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

10、 Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 20

11、17 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 15876-3:2017 EBS EN ISO 15876-3:2017EN ISO 15876-3:2017 (E) 3 European foreword This document (EN ISO 15876-3:2017) has been prepared by Technical Committee ISO/TC 138 “Plastic

12、s pipes, fittings and valves for the transport of fluids“ in collaboration with Technical Committee CEN/TC 155 “Plastics piping systems and ducting systems” the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an i

13、dentical text or by endorsement, at the latest by August 2017, and conflicting national standards shall be withdrawn at the latest by August 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be hel

14、d responsible for identifying any or all such patent rights. This document supersedes EN ISO 15876-3:2003. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cro

15、atia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Tur

16、key and the United Kingdom. Endorsement notice The text of ISO 15876-3:2017 has been approved by CEN as EN ISO 15876-3:2017 without any modification. BS EN ISO 15876-3:2017ISO 15876-3:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions, symbols and abbreviated

17、terms 24 Material characteristics 34.1 Plastics fitting material 34.1.1 PB Fitting material identical to the PB pipe compound . 34.1.2 PB fitting material not identical to the PB pipe compound 44.1.3 Plastics fitting material other than PB 54.2 Metallic fitting material . 54.3 Influence on water int

18、ended for human consumption . 55 General characteristics 55.1 Appearance 55.2 Opacity . 56 Geometrical characteristics 56.1 General . 56.1.1 Nominal diameter(s) 56.1.2 Angles 56.1.3 Threads 66.2 Dimensions of sockets for socket weld and electro-fusion fittings . 66.2.1 Dimensions of socket fusion fi

19、ttings (see Figure 1) 66.2.2 Dimensions of sockets for electrofusion fittings 86.3 Dimensions of metallic fittings . 97 Mechanical characteristics of plastics fittings . 97.1 General . 97.2 Fitting material identical to the PB pipe compound 107.3 Fitting made from PB not identical to the PB pipe com

20、pound .107.4 Fitting made from plastics other than PB . 108 Melt flow rate 129 Sealing elements 1210 Performance requirements 1211 Marking .1211.1 General requirements 1211.2 Minimum required marking . 1211.3 Additional marking 13Bibliography .14 ISO 2017 All rights reserved iiiContents PageBS EN IS

21、O 15876-3:2017ISO 15876-3:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body inter

22、ested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical

23、 Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO docume

24、nts should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsi

25、ble for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given

26、for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trad

27、e (TBT) see the following URL: www .iso .org/ iso/ foreword .html.ISO 15876-3 was prepared by the European Committee Standardization (CEN) Technical Committee CEN/TC 155, Plastics pipings systems and ducting systems, in collaboration with ISO Technical Committee ISO/TC 138, Plastics pipes, fittings

28、and valves for the transport of fluids, Subcommittee SC 2, Plastics pipes and fittings for water supplies, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).This second edition cancels and replaces the first edition (ISO 15876-3:2003), which has been te

29、chnically revised with the following changes: introduction of polybutene random copolymer (PB-R) and renaming existing polybutene (PB) into polybutene homopolymer (PB-H); revision of specifications for conditioning of samples.A list of all parts in the ISO 15876 series can be found on the ISO websit

30、e.iv ISO 2017 All rights reservedBS EN ISO 15876-3:2017ISO 15876-3:2017(E)IntroductionThe System Standard ISO 15876, of which this document is Part 3, specifies the requirements for a piping system when made from polybutene (PB). The piping system is intended to be used for hot and cold water instal

31、lations.In respect of potential adverse effects on the quality of water intended for human consumption, caused by the product covered by ISO 15876 (all parts): ISO 15876 (all parts) provides no information as to whether the product may be used without restriction in any of the Member States of the E

32、U or EFTA; it should be noted that, while awaiting the adoption of verifiable European criteria, existing national regulations concerning the use and/or the characteristics of this product remain in force.Requirements and test methods for materials and components, other than fittings, are specified

33、in ISO 15876-1 and ISO 15876-2. Characteristics for fitness for purpose (mainly for joints) are covered in ISO 15876-5. ISO/TS 15876-7 gives guidance for the assessment of conformity.This document specifies the characteristics of the fittings.At the date of publication of this standard, System Stand

34、ards for piping systems of other plastics materials used for the same application include ISO 15874, ISO 15875, ISO 15876, ISO 15877, ISO 21003 and ISO 22391. ISO 2017 All rights reserved vBS EN ISO 15876-3:2017BS EN ISO 15876-3:2017Plastics piping systems for hot and cold water installations Polybu

35、tene (PB) Part 3: Fittings1 ScopeThis document specifies the characteristics of fittings for polybutene-1 (PB-1) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems) and

36、for heating systems under design pressures and temperatures according to the class of application (see ISO 15876-1).The designation polybutene is used together with the abbreviation PB throughout this document.This document covers a range of service conditions (application classes) and design pressu

37、re classes. For values of TD, Tmaxand Tmalin excess of those in ISO 15876-1:2016, Table 1, this document does not apply.NOTE It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevan

38、t national regulations and installation practices or codes.It also specifies the parameters for the test methods referred to in this document.In conjunction with the other parts of ISO 15876, this document is applicable to fittings made from PB and to fittings made from other materials which are int

39、ended to be fitted to pipes conforming to ISO 15876-2 for hot and cold water installations, whereby the joints conform to the requirements of ISO 15876-5.This document is applicable to fittings of the following types: socket fusion fittings; electrofusion fittings; mechanical fittings; fittings with

40、 incorporated inserts.It is also applicable to fittings made from alternative materials which, when fitted to pipes conforming to ISO 15876-2, conform to the requirements of ISO 15876-5.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their

41、content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 228-1, Pipe threads where pressure-tight joints are not made on the threads Part 1: Di

42、mensions, tolerances and designationISO 1133-1, Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard methodINTERNATIONAL STANDARD ISO 15876-3:2017(E) ISO 2017 All rights reserved 1BS EN ISO 15876-3:2017ISO 15876-3:2017(E)ISO 1167-

43、1, Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 1: General methodISO 1167-3, Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 3:

44、 Preparation of componentsISO 1167-4, Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 4: Preparation of assembliesISO 3126, Plastics piping systems Plastics components Determination of dimensionsISO 7686, Plastics p

45、ipes and fittings Determination of opacityISO 9080, Plastics piping and ducting systems Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolationISO 15876-1:2016, Plastics piping system for hot and cold water installations Polybutene (PB) Part 1: G

46、eneralISO 15876-2, Plastics piping system for hot and cold water installations Polybutene (PB) Part 2: PipesISO 15876-5, Plastics piping system for hot and cold water installations Polybutene (PB) Part 5: Fitness for purpose of the systemEN 681-1, Elastomeric seals Materials requirements for pipe jo

47、int seals used in water and drainage applications Part 1: Vulcanized rubberEN 681-2, Elastomeric seals Materials requirements for pipe joint seals used in water and drainage applications Part 2: Thermoplastic elastomersEN 1254-3, Copper and copper alloys Plumbing fittings Part 3: Fittings with compr

48、ession ends for use with plastics pipesEN 1254-6, Copper and copper alloys Plumbing fittings Part 6: Fittings with push-fit endsEN 1254-8, Copper and copper alloys Plumbing fittings Part 8: Fittings with press ends for use with plastics and multilayer pipesEN 10088-1, Stainless steels Part 1: List o

49、f stainless steelsEN 10226-1, Pipe threads where pressure-tight joints are made on the threads Part 1: Taper external threads and parallel internal treads Dimensions, tolerances and designation3 Terms and definitions, symbols and abbreviated termsFor the purposes of this document, the terms and definitions, symbols and abbreviated terms given in ISO 15876-1 and the following apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC El