BS EN ISO 16484-3-2005 Building automation and control systems (BACS) - Functions《建筑物自动化和控制系统(BACS) 功能》.pdf

1、BRITISH STANDARD BS EN ISO 16484-3:2005 Building automation and control systems (BACS) Part 3: Functions The European Standard EN ISO 16484-3:2005 has the status of a British Standard ICS 35.240.99; 97.120 BS EN ISO 16484-3:2005 This British Standard was published under the authority of the Standard

2、s Policy and Strategy Committee on 9 February 2005 BSI 9 February 2005 ISBN 0 580 45387 1 National foreword This British Standard is the official English language version of EN ISO 16484-3:2005. It is identical with ISO 16484-3:2005. The UK participation in its preparation was entrusted by Technical

3、 Committee RHE/16, Performance requirements for control systems, to Subcommittee RHE/16/1, Control and management systems for building services, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The

4、 British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standard

5、s Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the res

6、ponsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front c

7、over, the EN ISO title page, pages 2 to 82, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM ENISO164843 Jan

8、uary2005 ICS35.240.99;97.120 Englishversion Buildingautomationandcontrolsystems(BACS)Part3: Functions(ISO164843:2005) Systmesdegestiontechniquedubtiment(SGTB) Partie3:Fonctions(ISO164843:2005) SystemederGebudeautomation(GA)Teil3:Funktionen (ISO164843:2005) ThisEuropeanStandardwasapprovedbyCENon10Dec

9、ember2003. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecreta

10、riatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandards

11、bodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPE

12、NDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2005CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.ENISO164843:2005:E Contents page Foreword.4 Introduction.5 1 Scope9 2 Normative references.10 3 Terms and d

13、efinitions 11 4 Symbols, abbreviations and acronyms.11 5 Requirements .11 5.1 Overview.11 5.1.1 Structure of the requirements and functions11 5.1.2 Description of functions 13 5.1.3 Description of function block examples .13 5.1.4 Description of the BACS points list.13 5.2 General system criteria14

14、5.3 Software14 5.3.1 BACS programs general 14 5.3.2 System management programs.14 5.3.3 Communication programs .19 5.3.4 BACS application programs 22 5.3.5 Human system interface programs .22 5.3.6 Service and commissioning functions29 5.3.7 Operating system.29 5.4 System engineering programs 30 5.4

15、.1 General description of functions for the engineering process 30 5.4.2 Hardware configuration .31 5.4.3 Control strategy configuration 31 5.4.4 Management function configuration .32 5.4.5 Commissioning tool functions 33 5.5 Engineered functions.33 5.5.1 General .33 5.5.2 I/O functions .34 5.5.3 Pr

16、ocessing functions.36 5.5.4 Management functions 64 5.5.5 Operator functions .66 Annex A (normative) BACS points list (BACS PL) 68 A.1 Use of the BACS PL .68 A.1.1 Functions in the BACS PL .68 A.1.2 Structure of the BACS PL 68 A.1.3 Describing applications by functions of the BACS PL.69 A.1.4 Descri

17、bing system integration by functions of the BACS PL 69 A.2 BACS points list template70 Annex B (informative) Examples for plant/control schematics and BACS points lists.71 B.1 Example 1, AHU71 B.1.1 Abbreviations used in example 1 71 B.1.2 Plant/control schematic example 1 .72 B.1.3 BACS points list

18、 example 1 .73 B.2 Example 2, energy plant.75 B.2.1 Abbreviations used in example 2 75 2egaP ENISO164843:2003Page2 ENISO164843:2005 B.2.2 Plant/control schematic example 2 .75 B.2.3 Plant description example 2 76 B.2.4 Controls description example 2.76 B.2.5 Control flow chart diagram example 2 77 B

19、.2.6 BACS points list example 2 .80 Bibliography82 3egaP ENISO164843:2003Page3 ENISO164843:2005 Foreword This document (EN ISO 16484-3:2005) has been prepared by Technical Committee CEN /TC 247, “Building Automation, Controls and Building Management“, the secretariat of which is held by SNV, in coll

20、aboration with Technical Committee ISO/TC 205 “Building environment design“. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2005, and conflicting national standards shall be withdrawn at the

21、 latest by July 2005. The EN ISO 16484-3 is part of the EN ISO 16484 series of European Standards under the general title Building Automation and Control Systems (BACS), which will comprise the following parts: Part 1: Overview and vocabulary Part 2: Hardware Part 3: Functions Part 4: Applications P

22、art 5: Data communication - Protocolcity Part 6: Data communication - Conformance testing Part 7: Project implementation Annex A , BACS points list, forms a normative part of this standard In this standard annex B, Examples for plant-/control schematic and BACS points list, is informative. This docu

23、ment includes a Bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Icela

24、nd, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. 4egaP ENISO164843:2003Page4 ENISO164843:2005Introduction This series of standards is intended for design of new buildings and retrofit o

25、f existing buildings for an acceptable indoor environment, practical energy conservation and efficiency. This part describes the software and the engineered functions used for building automation and control systems. The application of this series of standards for BACS is envisaged as follows: - the

26、 environmental design for all building types requires complex methods for automation and control. The functional integration of services other than HVAC e.g. lighting and electric power distribution control, security control, transportation, maintenance management or facilities management are genera

27、l tasks for all parties employed to develop an integrated multi-application system. This integration allows the user to take advantage of synergies between the different applications. This standard will give guidance to architects, consultants and contractors as well as to users on how to share such

28、 resources; - the innovation cycles between devices, systems and networks vary. To make it possible to add and to change existing devices, and extend the building network, several interfaces both proprietary and standardized are defined between the BACS network and the other systems. A manufacturer

29、can design a product, both to meet his specific marketing objectives and to give the option to integrate that special device into a multi-application BACS. Interfaces are also defined in appropriate parts of this standard along with the necessary communications protocol and conformance test required

30、 to support the interworking of devices; - a manufacturer, a systems house, or an electrical or mechanical contractor may assemble an implementation of a building automation and control system; - the application of this standard is not to standardize the hardware and software design or the architect

31、ure of a System, but to define the process for the creation of project specifications, where functionality and the quality of the solution are clearly defined. The purpose of this series of standards is intended for use by those involved in the design, manufacture, engineering, installation, commiss

32、ioning, operational maintenance and training of BACS when contracted, i.e.: as a guide to the terminology of the building automation and control trade. Unambiguous terminology is required for a complete and accurate conveyance of the intent and details of this standard; in product development, to av

33、oid unnecessary duplication of function or terminology, but should not place a restraint on the evolution of new products, systems or applications. A precise definition of system functionality is needed to prevent the overlap of functionality in different control system devices; as a basis for inter

34、facing products and systems. In order to interoperate, the elements of a BACS require a common data communication protocol and information model; as a basis for drawing up a project specification for the procurement of building automation and control products for systems suppliers and customers. The

35、 successful design, procurement, installation, and operation of BACS require careful management and integration of the various aspects of the project; as a code of practice for proper commissioning prior to handover of a system; by educational establishments wishing to train people in the field of b

36、uilding automation and control systems. This entire series of BACS standards consists of the following contents: 5egaP ENISO164843:2003Page5 ENISO164843:2005 Part 1: Overview and vocabulary (in preparation) Part 1 of this standard describes the objectives and interrelationships of all parts of this

37、standard. It provides an overview and detailed information about the structure of the related series of standards for the BACS industry. This part of the standard provides also the vocabulary with terms and definitions for the understanding of the entire series of this standard and it contains a tra

38、nslation of the main terms in English, French, Russian and German in an informative annex. This ongoing work is coordinated at expert level with standards work from ISO/TC 205 WG 3 and CEN/TC 247/WG 2, WG 3, WG 4 and WG 5. Each specific part of this standard contains its dedicated necessary terms an

39、d abbreviations/acronyms out of this part. Part 2: Hardware Part 2 of the standard specifies the requirements for the hardware to perform the tasks within a BACS. Part 2 provides the terms, definitions and abbreviations for the understanding of Part 2 and Part 3. Part 2 relates only to physical item

40、s/devices, i.e.: devices for management functions, operator stations and other human system interface devices; controllers, automation stations and application specific controllers; field devices and their interfaces; cabling and interconnection of devices; engineering and commissioning tools. Part

41、2 shows a generic system model to which all-different types of BACS and their interconnections (BACS network) can fit. A graphical concept of the BACS network in terms of LAN and internetwork topology will be provided in Part 5 of this standard. Regional amendment(s): Regional amendments can specify

42、 the local requirements of physical and electrical characteristics, the verifications for BACS devices and equipment, and the code of practice for the physical installation of systems. The amendments refer to the regional implementations of the relevant IEC standards. Part 3: Functions (refer to the

43、 scope of this part) Part 4: Applications (in preparation) Part 4 of the standard specifies the requirements for specific communicating applications/devices, e.g. for general room automation and for sophisticated optimization of controls for heating, fan coil and induction units, CAV, VAV and radian

44、t cooling. This ongoing work will be coordinated at expert level with standards work from ISO/TC 205 WG 3 and CEN/TC 247. Part 5: Data Communication Protocol Part 5 of the standard specifies data communication services and protocols for computer equipment and controllers used for monitoring and cont

45、rol of HVAC output positioning/setpoint: analog output object, analog output value; binary input counting: counter input value, totalised value, accumulated value; input state: binary input object, binary input value, multi-state input; output switching: binary output object, binary output, multi-st

46、ate output; text string values; schedule information; alarm and event information; files; and control programs and parameters respectively. This protocol models each building automation and control system as a collection of data structures called objects, the properties of which represent various as

47、pects of the hardware, software, and operation of the device. These objects provide a means of identifying and accessing information without requiring knowledge of the details of the devices internal design or configuration. An overview of possible integration with other systems in buildings, e.g. f

48、ire, security, access control, maintenance and facilities management, is shown in Figure 1 of Part 2 of this standard. Part 6: Data Communication Conformance testing (in preparation) Part 6 of the standard specifies the technical requirements of the conformance test suite and the methods for testing the products for the conformance with the protocol. It provides a comprehensive set of procedures for verifying the correct implementation of each capability claimed on a BACS network protocol implem