BS EN ISO 16484-6-2014 Building automation and control systems (BACS) Data communication conformance testing《建筑物自动化和控制系统(BACS) 数据通信一致性测试》.pdf

1、BSI Standards PublicationBS EN ISO 16484-6:2014Building automation and control systems (BACS)Part 6: Data communication conformance testingBS EN ISO 16484-6:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 16484-6:2014. It supersedes BS EN ISO 16484-6:20

2、09 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee RHE/16, Performance requirements for control systems.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all t

3、he necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 84748 6 ICS 35.240.99; 91.040.01; 97.120 Compliance with a British Standard cannot confer immunity from legal obligat

4、ions.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2014.Amendments/corrigenda issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 16484-6 May 2014 ICS 91.040.01 Supersedes EN ISO 16

5、484-6:2009English Version Building automation and control systems (BACS) - Part 6: Data communication conformance testing (ISO 16484-6:2014) Systmes dautomatisation et de gestion technique du btiment - Partie 6: Essais de conformit de la communication de donnes (ISO 16484-6:2014) Systeme der Gebudea

6、utomation - Teil 6: Datenbertragungsprotokoll - Konformittsprfung (ISO 16484-6:2014) This European Standard was approved by CEN on 6 April 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a

7、national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A

8、 version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cypr

9、us, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kin

10、gdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 16

11、484-6:2014 EForeword This document (EN ISO 16484-6:2014) has been prepared by Technical Committee ISO/TC 205 “Buildingenvironment design” in collaboration with Technical Committee CEN/TC 247 “Building Automation, Controlsand Building Management” the secretariat of which is held by SNV. This European

12、 Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by November 2014, and conflicting national standards shall be withdrawnat the latest by November 2014. Attention is drawn to the possibility that some of the element

13、s of this document may be the subject of patentrights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 16484-6:2009. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the followin

14、gcountries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, CzechRepublic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

15、 Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 16484-6:2014 has been approved by CEN as EN ISO 16484-6:2014 without any modification. BS EN ISO 16484-6:2014 EN ISO 16484-6:2014 (E)Foreword This document (EN

16、 ISO 16484-6:2014) has been prepared by Technical Committee ISO/TC 205 “Buildingenvironment design” in collaboration with Technical Committee CEN/TC 247 “Building Automation, Controlsand Building Management” the secretariat of which is held by SNV. This European Standard shall be given the status of

17、 a national standard, either by publication of an identicaltext or by endorsement, at the latest by November 2014, and conflicting national standards shall be withdrawnat the latest by November 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject

18、of patentrights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 16484-6:2009. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this

19、 European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, CzechRepublic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, S

20、lovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 16484-6:2014 has been approved by CEN as EN ISO 16484-6:2014 without any modification. BS EN ISO 16484-6:2014 EN ISO 16484-6:2014 (E)9 trsv iiiForeword s t 5 trw Building environment design sxvzvxt

21、rr sxvzv Building automation and control systems (BACS) Data communication conformance testing Part 1: Project specification and implementation Part 2: Hardware Part 3: Functions Part 5: Data communication protocol Part 6: Data communication conformance testing vyBS EN ISO 16484-6:2014 ISO 16484-6:2

22、014 (E)BS EN ISO 16484-6:2014INTERNATIONAL STANDARD ISO 16484-6:2014(E)9 trsv 1Building automation and control systems (BACS) Part 6: Data communication conformance testing 1 Scope sxvzv sxvzv 2 Relationship between this part of ISO 16484 and ANSI/ASHRAE 135.1-2011 sxvzv su wstrss Method of Test for

23、 Conformance to BACnet BS EN ISO 16484-6:2014BS EN ISO 16484-6:2014ISO 16484-6:2014 (E)BS EN ISO 16484-6:2014ANSI/ASHRAE Standard 135.1-2011(Supersedes ANSI/ASHRAE Standard 135.1-2009)Includes ANSI/ASHRAE Addenda listed in the History of RevisionsMethod of Test forConformance toBACnetSee the History

24、 of Revisions at the back of this standard for approval dates of addenda. This standard is under continuous maintenance by a Standing Standard Project Committee (SSPC) for which the Standards Com-mittee has established a documented program for regular publication of addenda or revisions, including p

25、rocedures for timely,documented, consensus action on requests for change to any part of the standard. The change submittal form, instructions, anddeadlines may be obtained in electronic form from the ASHRAE Web site (www.ashrae.org) or in paper form from the Managerof Standards. The latest edition o

26、f an ASHRAE Standard may be purchased from the ASHRAE Web site (www.ashrae.org) or fromASHRAE Customer Service, 1791 Tullie Circle, NE, Atlanta, GA 30329-2305. E-mail: ordersashrae.org. Fax: 404-321-5478.Telephone: 404-636-8400 (worldwide), or toll free 1-800-527-4723 (for orders in US and Canada).

27、For reprint permission, go towww.ashrae.org/permissions. 2012 ASHRAE ISSN 1041-2336BS EN ISO 16484-6:2014ISO 16484-6:2014 (E)SPECIAL NOTEThis American National Standard (ANS) is a national voluntary consensus standard developed under the auspices of ASHRAE.Consensus is defined by the American Nation

28、al Standards Institute (ANSI), of which ASHRAE is a member and which has approved thisstandard as an ANS, as“substantial agreement reached by directly and materially affected interest categories.This signifies the concurrenceof more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that aneffort be made toward their resolution.” Compliance with this standard is voluntary until and unless a legal jur