BS EN ISO 16890-1-2016 Air filters for general ventilation Technical specifications requirements and classification system based upon particulate matter efficiency (ePM)《全面通风用空气过滤器.pdf

1、BS EN ISO 16890-1:2016Air filters for generalventilationPart 1: Technical specifications,requirements and classification systembased upon particulate matter efficiency(ePM) (ISO 16890-1:2016)BS EN ISO 16890-1:2016Incorporating corrigendum March 2017BSI Standards PublicationWB11885_BSI_StandardCovs_2

2、013_AW.indd 1 15/05/2013 15:06BS EN ISO 16890-1:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 16890-1:2016. Together with BS EN ISO 16890-2:2016, BS EN ISO 16890-3:2016 and BS EN ISO 16890-4:2016 it supersedes DD ISO/TS 21220:2009 which is withdrawn a

3、nd BS EN 779:2012 which will be withdrawn on 30 June 2018.The UK participation in its preparation was entrusted to Technical Committee MCE/21, Filters for gases and liquids.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not pur

4、port to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017. Published by BSI Standards Limited 2017ISBN 978 0 580 97746 6ICS 23.120; 91.140.30Compliance with a British Standard cannot confer immunity from lega

5、l obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2016.Amendments/corrigenda issued since publicationDate Text affected31 March 2017 Supersession details updated to reflect extension of CEN date of withdrawal (DOW)EURO

6、PEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 16890-1 December 2016 ICS 91.140.30 Supersedes EN 779:2012English Version Air filters for general ventilation - Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM) (ISO 16890-1:20

7、16) Filtres air de ventilation gnrale - Partie 1: Spcifications techniques, exigences et systme de classification fond sur lefficacit des particules en suspension (ePM) (ISO 16890-1:2016) Luftfilter fr die allgemeine Raumlufttechnik - Teil 1: Technische Bestimmungen, Anforderungen und Effizienzklass

8、ifizierungssystem basierend auf Feinstaub (PM) (ISO 16890-1:2016) This European Standard was approved by CEN on 19 September 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national stand

9、ard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in an

10、y other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Repu

11、blic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN

12、COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 16890-1:2016 EBS

13、EN ISO 16890-1:2016EN ISO 16890-1:2016 (E) 3 European foreword This document (EN ISO 16890-1:2016) has been prepared by Technical Committee ISO/TC 142 “Cleaning equipment for air and other gases“ in collaboration with Technical Committee CEN/TC 195 “Air filters for general air cleaning” the secretar

14、iat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be withdrawn at the latest by June 2017. Attention is drawn to the

15、possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 779:2012. This document has been prepared under a mandate given to CEN by the Europe

16、an Commission and the European Free Trade Association. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finl

17、and, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of I

18、SO 16890-1:2016 has been approved by CEN as EN ISO 16890-1:2016 without any modification. BS EN ISO 16890-1:2016ISO 16890-1:2016(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 Symbols and abbreviated terms . 45 Technical specifications and requirements . 5

19、5.1 General . 55.2 Material . 55.3 Nominal air flow rate . 55.4 Resistance to air flow 55.5 Fractional efficiency curves (particle size efficiency spectrum) 55.6 Arrestance . 56 Test methods and procedure . 67 Classification system based on particulate matter efficiency (ePM) . 67.1 Definition of a

20、standardized particles size distribution of ambient air . 67.2 Calculation of the particulate matter efficiencies (ePM) 97.3 Classification . 98 Reporting .108.1 General 108.2 Interpretation of test reports 118.3 Summary . 12Annex A (informative) Shedding from filters 17Annex B (informative) Example

21、s .19Annex C (informative) Estimation of downstream fine dust concentrations 23Bibliography .26 ISO 2016 All rights reserved iiiContents PageBS EN ISO 16890-1:2016ISO 16890-1:2016(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodie

22、s (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations,

23、 governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further ma

24、intenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).At

25、tention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduct

26、ion and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to confor

27、mity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.The committee responsible for this document is ISO/TC 142, Cleaning equipment for air and other

28、gases.This first edition of ISO 16890-1, together with ISO 16890-2, ISO 16890-3 and ISO 16890-4, cancels and replaces ISO/TS 21220:2009, which has been technically revised.ISO 16890 consists of the following parts, under the general title Air filters for general ventilation: Part 1: Technical specif

29、ications, requirements and classification system based upon particulate matter efficiency (ePM) Part 2: Measurement of fractional efficiency and air flow resistance Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured Part 4: Condition

30、ing method to determine the minimum fractional test efficiencyiv ISO 2016 All rights reservedBS EN ISO 16890-1:2016ISO 16890-1:2016(E)IntroductionThe effects of particulate matter (PM) on human health have been extensively studied in the past decades. The results are that fine dust can be a serious

31、health hazard, contributing to or even causing respiratory and cardiovascular diseases. Different classes of particulate matter can be defined according to the particle size range. The most important ones are PM10, PM2,5and PM1. The U.S. Environmental Protection Agency (EPA), the World Health Organi

32、zation (WHO) and the European Union define PM10as particulate matter which passes through a size-selective inlet with a 50 % efficiency cut-off at 10 m aerodynamic diameter. PM2,5and PM1are similarly defined. However, this definition is not precise if there is no further characterization of the samp

33、ling method and the sampling inlet with a clearly defined separation curve. In Europe, the reference method for the sampling and measurement of PM10is described in EN 12341. The measurement principle is based on the collection on a filter of the PM10fraction of ambient particulate matter and the gra

34、vimetric mass determination (see EU Council Directive 1999/30/EC of 22 April 1999).As the precise definition of PM10, PM2,5and PM1is quite complex and not simple to measure, public authorities, like the U.S. EPA or the German Federal Environmental Agency (Umweltbundesamt), increasingly use in their

35、publications the more simple denotation of PM10as being the particle size fraction less or equal to 10 m. Since this deviation to the above mentioned complex “official” definition does not have a significant impact on a filter elements particle removal efficiency, the ISO 16890 series refers to this

36、 simplified definition of PM10, PM2,5and PM1.Particulate matter in the context of the ISO 16890 series describes a size fraction of the natural aerosol (liquid and solid particles) suspended in ambient air. The symbol ePMxdescribes the efficiency of an air cleaning device to particles with an optica

37、l diameter between 0,3 m and x m. The following particle size ranges are used in the ISO 16890 series for the listed efficiency values.Table 1 Optical particle diameter size ranges for the definition of the efficiencies , ePMxEfficiency Size range, mePM100,3 10ePM2,50,3 2,5ePM10,3 1Air filters for g

38、eneral ventilation are widely used in heating, ventilation and air-conditioning applications of buildings. In this application, air filters significantly influence the indoor air quality and, hence, the health of people, by reducing the concentration of particulate matter. To enable design engineers

39、 and maintenance personnel to choose the correct filter types, there is an interest from international trade and manufacturing for a well-defined, common method of testing and classifying air filters according to their particle efficiencies, especially with respect to the removal of particulate matt

40、er. Current regional standards are applying totally different testing and classification methods, which do not allow any comparison with each other, and thus hinder global trade with common products. Additionally, the current industry standards have known limitations by generating results which ofte

41、n are far away from filter performance in service, i.e. overstating the particle removal efficiency of many products. With this new ISO 16890 series, a completely new approach for a classification system is adopted, which gives better and more meaningful results compared to the existing standards.Th

42、e ISO 16890 series describes the equipment, materials, technical specifications, requirements, qualifications and procedures to produce the laboratory performance data and efficiency classification based upon the measured fractional efficiency converted into a particulate matter efficiency (ePM) rep

43、orting system.Air filter elements according to the ISO 16890 series are evaluated in the laboratory by their ability to remove aerosol particulate expressed as the efficiency values ePM1, ePM2,5and ePM10. The air filter elements can then be classified according to the procedures defined in this part

44、 of ISO 16890. The particulate removal efficiency of the filter element is measured as a function of the particle size in the range of 0,3 m to 10 m of the unloaded and unconditioned filter element as per the procedures defined in ISO 16890-2. After the initial particulate removal efficiency testing

45、, the air filter element is ISO 2016 All rights reserved vBS EN ISO 16890-1:2016ISO 16890-1:2016(E)conditioned according to the procedures defined in ISO 16890-4 and the particulate removal efficiency is repeated on the conditioned filter element. This is done to provide information about the intens

46、ity of any electrostatic removal mechanism which may or may not be present with the filter element for test. The average efficiency of the filter is determined by calculating the mean between the initial efficiency and the conditioned efficiency for each size range. The average efficiency is used to

47、 calculate the ePMxefficiencies by weighting these values to the standardized and normalized particle size distribution of the related ambient aerosol fraction. When comparing filters tested in accordance with the ISO 16890 series, the fractional efficiency values shall always be compared among the

48、same ePMxclass (ex. ePM1of filter A with ePM1of filter B). The test dust capacity and the initial arrestance of a filter element are determined as per the test procedures defined in ISO 16890-3.vi ISO 2016 All rights reservedBS EN ISO 16890-1:2016INTERNATIONAL STANDARD ISO 16890-1:2016(E)Air filters

49、 for general ventilation Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM)1 ScopeThis part of ISO 16890 establishes an efficiency classification system of air filters for general ventilation based upon particulate matter (PM). It also provides an overview of the test procedures, and specifies general requirements for assessing and marking the filters, as well as for documenting the test results. It is intended for use in conjunction with ISO 16890-2, ISO 16