BS EN ISO 17694-2016 Footwear Test methods for uppers and lining Flex resistance《鞋类 鞋帮试验方法 抗挠曲性》.pdf

1、BS EN ISO 17694:2016Footwear Test methodsfor uppers and lining Flexresistance (ISO 17694:2016)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN ISO 17694:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO17694:2016. It

2、supersedes BS EN 13512:2002 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee TCI/69, Footwear, leather and coated fabrics.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport t

3、o include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 80863 0ICS 61.060Compliance with a British Standard cannot confer immunity fromlegal obligations.This Br

4、itish Standard was published under the authority of theStandards Policy and Strategy Committee on 31 May 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 17694 May 2016 ICS 61.060 Supersedes EN 13512:2001English V

5、ersion Footwear - Test methods for uppers and lining - Flex resistance (ISO 17694:2016) Chaussures - Mthodes dessai pour les tiges et les doublures - Rsistance la flexion (ISO 17694:2016) Schuhe - Prfverfahren fr Obermaterialien und Futter - Dauerfaltverhalten (ISO 17694:2016) This European Standard

6、 was approved by CEN on 15 April 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such

7、national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own l

8、anguage and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Gre

9、ece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG

10、CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 17694:2016 EBS EN ISO 17694:2016EN ISO 17694:2016 (E) 3 European foreword This document (EN ISO 17694:2016) h

11、as been prepared by Technical Committee CEN/TC 309 “Footwear“, the secretariat of which is held by AENOR, in collaboration with Technical Committee ISO/TC 216 “Footwear“. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorse

12、ment, at the latest by November 2016, and conflicting national standards shall be withdrawn at the latest by November 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for ident

13、ifying any or all such patent rights. This document supersedes EN 13512:2001. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic,

14、 Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorseme

15、nt notice The text of ISO 17694:2016 has been approved by CEN as EN ISO 17694:2016 without any modification. BS EN ISO 17694:2016ISO 17694:2016(E)Foreword iv1 Scope . 12 Normative references 13 Terms and definitions . 14 Short description . 15 Apparatus and material 16 Sampling and conditioning 36.1

16、 General . 36.2 Dry tests 36.3 Wet tests . 36.4 Cold tests 47 Test method . 47.1 Principle 47.2 Procedure 48 Test report . 6 ISO 2016 All rights reserved iiiContents PageBS EN ISO 17694:2016ISO 17694:2016(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of

17、 national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Int

18、ernational organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those in

19、tended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see w

20、ww.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document

21、 will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expr

22、essions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationISO 17694 was prepared by the European Committee Standardization (CEN) Technical Committee C

23、EN/TC 309, Footwear, in collaboration with ISO Technical Committee TC 216, Footwear, in accordance with the agreement on technical cooperation between ISO and CEN (Vienna Agreement).This second edition cancels and replaces the first edition (ISO 17694:2003), which has been technically revised.iv ISO

24、 2016 All rights reservedBS EN ISO 17694:2016INTERNATIONAL STANDARD ISO 17694:2016(E)Footwear Test methods for uppers and lining Flex resistance1 ScopeThis International Standard specifies a test method for determining the flex resistance of uppers and linings irrespective of the material in order t

25、o assess the suitability for the end use.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the

26、referenced document (including any amendments) applies.ISO 3696, Water for analytical laboratory use Specification and test methodsISO 5402-1:2011, Leather Determination of flex resistance Part 1: Flexometer methodISO 177091), Footwear Sampling location, preparation and duration of conditioning of s

27、amples and test piecesISO 184542), Footwear Standard atmospheres for conditioning and testing of footwear and components for footwear3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.3.1flex resistanceresistance of a material to crack or otherwise fa

28、il at flexing creases3.2surfacevisible site of the material during the use at the shoeNote 1 to entry: The visible site of the material can be by upper the grain site of the leather or the coated site of a coated textile, by lining the site of the material visible from the inside of the shoe.4 Short

29、 descriptionTest specimens are cut from a shoe vamp or from material for shoes, folded and inserted in the test machine. The test simulates the damage caused by the inward folding of the vamp of the upper, but does not readily reproduce damage occurring on outward folds. It is carried out humid, dry

30、 or in a cold climate.5 Apparatus and materialThe following apparatus and material shall be used.1) EN 13400 is equivalent to ISO 17709.2) EN 12222 is equivalent to ISO 18454. ISO 2016 All rights reserved 1BS EN ISO 17694:2016ISO 17694:2016(E)5.1 Test machine, in accordance with ISO 5402-1:2011, 4.1

31、 including the following.5.1.1 At least four pairs of clamps. The upper clamp consists of a pair of flat plates as shown in Figure 1.The lower clamp is fixed and lies in the same vertical plane as the upper clamp.Dimensions in millimetresBCEFGH12415 150 125 1Key1 flexing angle 2230 0302 clamp tighte

32、ning screw3 2 mm radius4 horizontal axleFigure 1 Upper clamp dimensions5.1.2 Means of applying a simple harmonic reciprocating action, to repeatedly move the upper clamp through an angle of 2230 030. The speed of oscillation shall be (100 5) cycles/min.The distance between the upper and lower clamp,

33、 when the upper clamp is in the horizontal position, shall be (25 1) mm.5.1.3 Means of counting, the total number of cycles.5.2 Press knife, (70 1) mm (45 1) mm or similar for cutting test specimens.5.3 Optical magnifier, with a magnification of approximately four to six times.5.4 For wetting test s

34、pecimens.5.4.1 Glass dish, minimum of 100 mm diameter and 25 mm depth.5.4.2 Distilled or deionised water, complying with Grade 3 of ISO 3696.2 ISO 2016 All rights reservedBS EN ISO 17694:2016ISO 17694:2016(E)5.4.3 Filter paper.5.4.4 Desiccator or another container, able to evacuate.5.4.5 Vacuum pump

35、, for reducing the pressure within the desiccator to below 4 kPa.5.5 For conducting cold tests, a cabinet capable of maintaining an internal atmospheric temperature of at least (-5 2) C and large enough to contain the test machine. If required, temperatures down to -30 C can be used.6 Sampling and c

36、onditioning6.1 GeneralCut out the required number (see Table 1) of rectangular test specimens with the press knife. Cut half the required number of test specimens with the longer edge parallel with the along direction of the material backbone direction for leather and selvedge (warp) or machine dire

37、ction for non-leather materials and half perpendicular to this. For test specimens cut from uppers, the along direction is the X-axis as defined in ISO 17709.For uppers, cut a test specimen from the centre of the forepart so that the centre of the test specimen aligns with the point of most flexing

38、in the shoe.For materials, cut test specimens from a range of positions across the full usable width and length of the sheet material. For a material with a woven structure, this shall prevent any two test specimens containing the same warp or weft threads.It can be that it is impossible to cut a te

39、st specimen of sufficient size from certain types of footwear especially childrens. The test specimen size may be reduced slightly at width only; the length (70 1) mm shall not be reduced. However, it is preferred to test the materials themselves and, if necessary, introduce perforations or seams (o

40、r other design features) similar to that found in the forepart of the shoe.Table 1 Standard test conditions and number of test specimensType of material being testedTesting conditionsDry Wet ColdGrain leather 2 2 Coated leather 2 2 2Suede 2 Coated fabric 4 4Fabric 4 6.2 Dry testsPlace all the test s

41、pecimens which will be tested dry in a standard controlled atmosphere complying with ISO 18454 for at least 24 h prior to test.6.3 Wet testsPlace any test specimens that are to be tested wet in a glass dish. Fill in distilled or deionised water until a minimum water depth of 10 mm. Place the glass d

42、ish in the desiccator. Reduce the pressure for 2 min under less the 4 kPa. The normal pressure has to be re-established after the 2 min. Repeat this process two times. Take the test specimens out of the desiccator and remove the rest of water with filter paper and start the wet tests immediate. ISO

43、2016 All rights reserved 3BS EN ISO 17694:2016ISO 17694:2016(E)6.4 Cold testsThe test machine shall be placed in a cold cabinet. Place the test specimens in the test machine. Close the cabinet and start the cooling until the desired temperature. The test shall start after 30 min in the cold atmosphe

44、re.Warm the cold chamber slowly to room temperature after flexing to avoid condensation effects. After replacing the specimens cool the chamber and start the flexometer 30 min after reaching the desired temperature again.7 Test method7.1 PrincipleA rectangular test specimen is clamped in a flexing m

45、achine. One end of the test specimen is held in an upper clamp with the surface folded inwards so that these surfaces touch and the fold line is horizontal. It is then turned inside out and bent through 90 before being inserted in the lower clamp. In the lower clamp, the test specimen is folded so t

46、hat the reverse or flesh surface of the test specimen touch and the fold line is vertical.During the test, the clamps oscillate at a constant speed so that the test specimen is repeatedly flexed. The tests can be carried out with either wet or dry test specimens at room temperature or dry test speci

47、mens at sub-zero temperatures. After a predetermined number of cycles, the tests are stopped and the test specimen is visually examined for signs of damage or salt spue.7.2 ProcedureMark on the back of each test specimen the along direction of the material, e.g. with an arrow, and determine the requ

48、ired testing conditions. It should be noted that linings will be tested face down and uppers face up.7.2.1 Carry out the test in the conditioned standard atmosphere specified in ISO 18454.7.2.2 If conducting a wet test, use the prepared test specimen (6.3).7.2.3 If conducting a cold test, follow the

49、 instruction of 6.4 and start the tests. Ensure that the atmosphere surrounding the flexing machine is at the required temperature usually (-5 2) C.7.2.4 Load each test specimen as follows.7.2.4.1 Open the upper and the lower clamp up to the twice thickness of specimen, at least.7.2.4.2 Turn the motor as far as the lower edge of the upper clamp stands parallel to the upper edge of the fixed lower clamp.7.2.4.3 Fold the test specimen with the surface inwards, so that the two longer ed