BS EN ISO 19085-1-2017 Woodworking machines Safety Common requirements《木工机械 安全 通用要求》.pdf

1、Woodworking machines - SafetyPart 1: Common requirements (ISO 19085-1:2017)BS EN ISO 19085-1:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 19085-1 August 2017 ICS 13.110; 79.120.10 English Version Woodwor

2、king machines - Safety - Part 1: Common requirements (ISO 19085-1:2017) Machines bois - Scurit - Partie 1: Exigences communes (ISO 19085-1:2017) Holzbearbeitungsmaschinen - Sicherheit - Teil 1: Gemeinsame Anforderungen (ISO 19085-1:2017) This European Standard was approved by CEN on 12 September 201

3、6. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained o

4、n application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENE

5、LEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Ital

6、y, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Cent

7、re: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 19085-1:2017 ENational forewordThis British Standard is the UK implementation of EN ISO 19085-1:2017.The UK participation in its prepara

8、tion was entrusted to Technical Committee MTE/23, Woodworking machines.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct appl

9、ication. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 84999 2ICS 13.110; 79.120.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strat

10、egy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 19085-1:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 19085-1 August 2017 ICS 13.110; 79.120.10 English Version Woodworking machines - Safety - Part 1: Common r

11、equirements (ISO 19085-1:2017) Machines bois - Scurit - Partie 1: Exigences communes (ISO 19085-1:2017) Holzbearbeitungsmaschinen - Sicherheit - Teil 1: Gemeinsame Anforderungen (ISO 19085-1:2017) This European Standard was approved by CEN on 12 September 2016. CEN members are bound to comply with t

12、he CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Manageme

13、nt Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status

14、 as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

15、Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 201

16、7 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 19085-1:2017 EBS EN ISO 19085-1:2017EN ISO 19085-1:2017 (E) 3 European foreword This document (EN ISO 19085-1:2017) has been prepared by Technical Committee ISO/TC 39 “Machine t

17、ools” in collaboration with Technical Committee CEN/TC 142 “Woodworking machines - Safety” the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2018, a

18、nd conflicting national standards shall be withdrawn at the latest by February 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document ha

19、s been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN-C

20、ENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary,

21、 Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 19085-1:2017 has been approved by CEN as EN ISO 19085-1:2017 witho

22、ut any modification. BS EN ISO 19085-1:2017EN ISO 19085-1:2017 (E) 4 Annex ZA (informative) Relationship between this European Standard and the essential requirements of Directive 2006/42/EC aimed to be covered This European standard has been prepared under a Commissions standardisation request “M/3

23、96 Mandate to CEN and CENELEC for standardisation in the field of machinery” to provide one voluntary means of conforming to essential requirements of Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery. Once this standard is cited in the Official Journal o

24、f the European Union under that Directive 2006/42/EC, compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this standard, a presumption of conformity with the corresponding essential requirements of that Directive 2006/42/EC, and assoc

25、iated EFTA regulations. Table ZA.1 Correspondence between this European Standard and Article(s) of Directive 2006/42/EC Essential Requirements of Directive 2006/42/EC Clause(s)/sub-clause(s) of this EN Remarks/Notes To confer a presumption of conformity with the relevant essential requirements of Di

26、rective 2006/42/EC, this standard (providing common requirements for a whole machine family) has to be applied together with one of those standards as specified in the scope (providing specific requirements for a particular category of machinery within this family), once this standard is cited in th

27、e Official Journal of the European Communities under Directive 2006/42/EC. This part of EN ISO 19085 is intended to be used in conjunction with the other parts of EN ISO 19085, applicable to specific machine types, as stated in the Scope. This means that the requirements of this part alone may not b

28、e enough to fulfil the Essential Requirements of the Machinery Directive 2006/42. WARNING 1 Presumption of conformity stays valid only as long as a reference to this European Standard is maintained in the list published in the Official Journal of the European Union. Users of this standard should con

29、sult frequently the latest list published in the Official Journal of the European Union. WARNING 2 Other Union legislation may be applicable to the product(s) falling within the scope of this standard. BS EN ISO 19085-1:2017This page deliberately left blank ISO 19085-1:2017(E)Foreword vIntroduction

30、vi1 Scope . 12 Normative references 13 Terms and definitions . 34 List of significant hazards . 65 Safety requirements and measures for controls . 95.1 Safety and reliability of control systems . 95.2 Control devices 105.3 Start . 105.4 Safe stops 115.4.1 General. 115.4.2 Normal stop . 115.4.3 Opera

31、tional stop 115.4.4 Emergency stop .115.5 Braking function of tool spindles . 125.6 Mode selection . 125.7 Spindle speed changing 135.7.1 Spindle speed changing by changing belts on the pulleys 135.7.2 Spindle speed changing by incremental speed change motor 135.7.3 Infinitely variable speed by freq

32、uency inverter .135.8 Failure of any power supply . 145.9 Manual reset control . 145.10 Enabling control 145.11 Machine moving parts speed monitoring . 145.12 Time delay 156 Safety requirements and measures for protection against mechanical hazards .156.1 Stability . 156.1.1 Stationary machines 156.

33、1.2 Displaceable machines 156.2 Risk of break-up during operation 156.3 Tool holder and tool design. 156.3.1 General. 156.3.2 Spindle locking .166.3.3 Circular saw blade fixing device 166.3.4 Flange dimension for circular saws blades 166.4 Braking 166.4.1 Braking of tool spindles 166.4.2 Maximum run

34、-down time . 166.4.3 Brake release 176.5 Safeguards 176.5.1 Fixed guards 176.5.2 Interlocking movable guards 176.5.3 Hold-to-run control 186.5.4 Two-hand control .186.5.5 Electro-sensitive protective equipment (ESPE) .186.5.6 Pressure-sensitive protective equipment (PSPE).196.6 Prevention of access

35、to moving parts . 196.6.1 General. 196.6.2 Guarding of tools .196.6.3 Guarding of drives .206.6.4 Guarding of shearing and/or crushing zones 20 ISO 2017 All rights reserved iiiContents PageISO 19085-1:2017(E)Foreword vIntroduction vi1 Scope . 12 Normative references 13 Terms and definitions . 34 Lis

36、t of significant hazards . 65 Safety requirements and measures for controls . 95.1 Safety and reliability of control systems . 95.2 Control devices 105.3 Start . 105.4 Safe stops 115.4.1 General. 115.4.2 Normal stop . 115.4.3 Operational stop 115.4.4 Emergency stop .115.5 Braking function of tool sp

37、indles . 125.6 Mode selection . 125.7 Spindle speed changing 135.7.1 Spindle speed changing by changing belts on the pulleys 135.7.2 Spindle speed changing by incremental speed change motor 135.7.3 Infinitely variable speed by frequency inverter .135.8 Failure of any power supply . 145.9 Manual rese

38、t control . 145.10 Enabling control 145.11 Machine moving parts speed monitoring . 145.12 Time delay 156 Safety requirements and measures for protection against mechanical hazards .156.1 Stability . 156.1.1 Stationary machines 156.1.2 Displaceable machines 156.2 Risk of break-up during operation 156

39、.3 Tool holder and tool design. 156.3.1 General. 156.3.2 Spindle locking .166.3.3 Circular saw blade fixing device 166.3.4 Flange dimension for circular saws blades 166.4 Braking 166.4.1 Braking of tool spindles 166.4.2 Maximum run-down time . 166.4.3 Brake release 176.5 Safeguards 176.5.1 Fixed gua

40、rds 176.5.2 Interlocking movable guards 176.5.3 Hold-to-run control 186.5.4 Two-hand control .186.5.5 Electro-sensitive protective equipment (ESPE) .186.5.6 Pressure-sensitive protective equipment (PSPE).196.6 Prevention of access to moving parts . 196.6.1 General. 196.6.2 Guarding of tools .196.6.3

41、 Guarding of drives .206.6.4 Guarding of shearing and/or crushing zones 20 ISO 2017 All rights reserved iiiContents PageBS EN ISO 19085-1:2017ISO 19085-1:2017(E)6.7 Impact hazard . 206.8 Clamping devices . 206.9 Measures against ejection 216.9.1 General. 216.9.2 Guards materials and characteristics2

42、16.10 Work-piece supports and guides 227 Safety requirements and measures for protection against other hazards .227.1 Fire 227.2 Noise . 227.2.1 Noise reduction at the design stage .227.2.2 Noise emission measurement . 227.3 Emission of chips and dust 247.4 Electricity 247.4.1 General. 247.4.2 Displ

43、aceable machines 257.5 Ergonomics and handling . 257.6 Lighting . 257.7 Pneumatics 267.8 Hydraulics 267.9 Electromagnetic compatibility . 267.10 Laser 267.11 Static electricity . 267.12 Errors of fitting 267.13 Isolation . 267.14 Maintenance . 278 Information for use .278.1 Warning devices 278.2 Mar

44、king 288.2.1 General. 288.2.2 Additional markings 298.3 Instruction handbook 298.3.1 General. 298.3.2 Additional information 33Annex A (informative) Performance level required 34Annex B (normative) Test for braking function .35Annex C (normative) Stability test for displaceable machines 37Annex D (n

45、ormative) Impact test for guards 38Annex E (normative) Noise emission measurement for machines not in ISO 7960:1995 .41Bibliography .46iv ISO 2017 All rights reservedBS EN ISO 19085-1:2017ISO 19085-1:2017(E)6.7 Impact hazard . 206.8 Clamping devices . 206.9 Measures against ejection 216.9.1 General.

46、 216.9.2 Guards materials and characteristics216.10 Work-piece supports and guides 227 Safety requirements and measures for protection against other hazards .227.1 Fire 227.2 Noise . 227.2.1 Noise reduction at the design stage .227.2.2 Noise emission measurement . 227.3 Emission of chips and dust 24

47、7.4 Electricity 247.4.1 General. 247.4.2 Displaceable machines 257.5 Ergonomics and handling . 257.6 Lighting . 257.7 Pneumatics 267.8 Hydraulics 267.9 Electromagnetic compatibility . 267.10 Laser 267.11 Static electricity . 267.12 Errors of fitting 267.13 Isolation . 267.14 Maintenance . 278 Inform

48、ation for use .278.1 Warning devices 278.2 Marking 288.2.1 General. 288.2.2 Additional markings 298.3 Instruction handbook 298.3.1 General. 298.3.2 Additional information 33Annex A (informative) Performance level required 34Annex B (normative) Test for braking function .35Annex C (normative) Stabili

49、ty test for displaceable machines 37Annex D (normative) Impact test for guards 38Annex E (normative) Noise emission measurement for machines not in ISO 7960:1995 .41Bibliography .46iv ISO 2017 All rights reserved ISO 19085-1:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee ha