BS EN ISO 22155-2016 Soil quality Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers Static headspace method《土质 挥发性芳烃与卤代烃以及选定醚类.pdf

1、BSI Standards PublicationBS EN ISO 22155:2016Soil quality Gas chro-matographicdetermination of volatile aromatic and halogenated hydrocarbons and selected ethers Static headspace methodBS EN ISO 22155:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 2215

2、5:2016. It supersedes BS EN ISO 22155:2013 which iswithdrawn.The UK participation in its preparation was entrusted to Technical Committee EH/4, Soil quality.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include

3、all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 87552 6 ICS 13.080.10 Compliance with a British Standard cannot confer immunity from legal obligations.This Brit

4、ish Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 22155 March 2016 ICS 13.080.10 Supersedes EN ISO 22155:201

5、3English Version Soil quality - Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers - Static headspace method (ISO 22155:2016) Qualit du sol - Dosage des hydrocarbures aromatiques et halogns volatils et de certains thers par chromatographie en phas

6、e gazeuse - Mthode par espace de tte statique (ISO 22155:2016) Bodenbeschaffenheit - Gaschromatographische Bestimmung flchtiger aromatischer Kohlenwasserstoffe, Halogenkohlenwasserstoffe und ausgewhlter Ether - Statisches Dampfraum-Verfahren (ISO 22155:2016) This European Standard was approved by CE

7、N on 23 January 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standard

8、s may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notif

9、ied to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Ice

10、land, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Manag

11、ement Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 22155:2016 EBS EN ISO 22155:2016EN ISO 22155:2016 (E) 3 European foreword This document (EN ISO 22155:2016) has been prepared

12、by Technical Committee ISO/TC 190 “Soil quality” in collaboration with Technical Committee CEN/TC 345 “Characterization of soils” the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorse

13、ment, at the latest by September 2016, and conflicting national standards shall be withdrawn at the latest by September 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for ide

14、ntifying any or all such patent rights. This document supersedes EN ISO 22155:2013. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Rep

15、ublic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. End

16、orsement notice The text of ISO 22155:2016 has been approved by CEN as EN ISO 22155:2016 without any modification. BS EN ISO 22155:2016ISO 22155:2016(E)Foreword iv1 Scope . 12 Normative references 13 Principle 24 Reagents 25 Apparatus . 66 Sampling, preservation, and sample pretreatment . 76.1 Gener

17、al . 76.2 Sampling using vials pre-filled with methanol 76.3 Sampling using coring tube method . 87 Procedure. 87.1 Blank determination 87.2 Extraction 87.3 Head-space analysis 87.4 Gas chromatographic analysis . 97.4.1 General 97.4.2 Calibration 107.4.3 Measurement . 118 Calculation .118.1 Calculat

18、ion of the concentration of a volatile compound in the water sample 118.2 Calculation of the concentration of a volatile compound in the soil sample 129 Expression of results .1210 Precision 1211 Test report 12Annex A (informative) Relative retention times with respect to ethylbenzene-D10 of volatil

19、e aromatic hydrocarbons and volatile halogenated hydrocarbons Examples of suitable target and qualifier ions 13Annex B (normative) Check on internal standards 15Annex C (informative) Validation (general) .16Annex D (informative) Performance characteristics 19Bibliography .21 ISO 2016 All rights rese

20、rved iiiContents PageBS EN ISO 22155:2016ISO 22155:2016(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committee

21、s. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the Inter

22、national Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the diff

23、erent types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shal

24、l not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is

25、 information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT)

26、see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 190, Soil quality, Subcommittee SC 3, Chemical methods and soil characteristics.This third edition cancels and replaces the second edition (ISO 22155:2011), which has been technically rev

27、ised.iv ISO 2016 All rights reservedBS EN ISO 22155:2016INTERNATIONAL STANDARD ISO 22155:2016(E)Soil quality Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers Static headspace method1 ScopeThis International Standard specifies a static headspace

28、method for quantitative gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected aliphatic ethers in soil.This International Standard is applicable to all types of soil.The limit of quantification is dependent on the detection system used and the quality of th

29、e methanol grade used for the extraction of the soil sample.Under the conditions specified in this International Standard, the following limits of quantifications apply (expressed on basis of dry matter).Typical limit of quantification when using GC-FID: volatile aromatic hydrocarbons: 0,2 mg/kg; al

30、iphatic ethers as methyl tert.-butyl ether(MTBE) and tert.-amyl methyl ether (TAME): 0,5 mg/kg.Typical limit of quantification when using GC-ECD: volatile halogenated hydrocarbons: 0,01 mg/kg to 0,2 mg/kg.Lower limits of quantification for some compounds can be achieved by using mass spectrometry (M

31、S) with selected ion detection (see Annex D).2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of

32、the referenced document (including any amendments) applies.ISO 10381-1, Soil quality Sampling Part 1: Guidance on the design of sampling programmesISO 10381-2, Soil quality Sampling Part 2: Guidance on sampling techniquesISO 11465, Soil quality Determination of dry matter and water content on a mass

33、 basis Gravimetric methodISO 15680, Water quality Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorptionISO 18512, Soil quality Guidance on long and short term storage of soil sample

34、sISO 22892, Soil quality Guidelines for the identification of target compounds by gas chromatography and mass spectrometry ISO 2016 All rights reserved 1BS EN ISO 22155:2016ISO 22155:2016(E)3 PrincipleTest samples are taken from an untreated field moist soil sample. To prevent losses of the volatile

35、s, samples are taken as undisturbed as possible in the field with a tube corer or by adding methanol immediately in the field.The test sample is extracted with methanol. An aliquot of the methanol extract is transferred into a headspace vial with a defined amount of water and sealed. The temperature

36、 of the vials is stabilized in a thermostatic system to a temperature within the range 50 C to 80 C to achieve specified equilibrium conditions. Gas chromatographic analysis of the volatile compounds in gaseous phase in equilibrium with the water in the vials is carried out by using headspace inject

37、ion and an appropriate capillary column. Volatile organic compounds are detected with appropriate detectors as, mass spectrometric detector (MS), flame ionization detector (FID), electron capture detector (ECD), photo ionization detector (PID), or electrolytic conductivity detector (ELCD). Identific

38、ation and quantification is made by comparison of retention times and peak heights (or peak areas) comparing to the internal standard added.When using non-specific detectors as FID and ECD, the confirmation of the identity of the detected compounds and their concentrations should be done by repeatin

39、g the gas chromatographic analysis using a column of different polarity. When using gas chromatography-mass spectrometry (GC-MS), the identity confirmation and the quantification can be done in a single run.4 ReagentsAll reagents shall be of recognized analytical grade. Verify whether the reagents a

40、re applicable for this specific purpose and free of interfering compounds.4.1 Water, free of volatile organic compoundsWater, free from volatile organic contaminants shall show negligible interferences in comparison with the smallest concentration to be determined. A sufficient amount of water from

41、the same batch should be available to complete each batch of analyses, including all preparations.4.2 Internal standards4.2.1 For the determination of volatile aromatic hydrocarbons preferably two internal standards shall be selected from Table 1. They shall not interfere with compounds present in t

42、he sample extract.Table 1 Examples of suitable internal standardsCompound name CAS-RNaEC-NbToluene-D8 2037265 2180095Ethylbenzene-D10 25837052 24729282-bromofluorobenzene 1072851 2140183aChemical Abstracts Service Registry Number.bEC-Number.4.2.2 For the determination of volatile halogenated hydroca

43、rbons, preferably two internal standards shall be selected from Table 2. They shall not interfere with compounds present in the sample extract.2 ISO 2016 All rights reservedBS EN ISO 22155:2016ISO 22155:2016(E)Table 2 Examples of suitable internal standardsCompound name CAS-RNaEC-Nb1,4-dichlorobutan

44、e 110565 2037781,-trifluorotoluene 98088 20263502-bromofluorobenzene 1072851 2140183aChemical Abstracts Service Registry Number.bEC-Number.4.3 Standard compounds4.3.1 Volatile aromatic hydrocarbonsTable 3 contains volatile aromatic hydrocarbons for use as standard compounds.Table 3 Examples of volat

45、ile aromatic hydrocarbons suitable as standard compoundsCompound name CAS-RNaEC-NbBenzene 71432 2027537Toluene 108883 2036259Ethylbenzene 100414 2028494o-xylene 95476 2024222m-xylene 108383 2035763p-xylene 106423 2033965Styrene 100425 2028515Naphthalene 91203 2020495aChemical Abstracts Service Regis

46、try Number.bEC-Number.4.3.2 Volatile halogenated hydrocarbonsTable 4 contains volatile halogenated hydrocarbons for use as standard compounds.Table 4 Examples of volatile halogenated hydrocarbons suitable as standard compoundsCompound name CAS-RNaEC-NbDichloromethane 75092 2008389Trichloromethane 67

47、663 2006638Tetrachloromethane 56235 20026281,1-dichloroethane 75343 20086351,2-dichloroethane 107062 20345811,1,1-trichloroethane 71556 20075631,1,2-trichloroethane 79005 20116691,2-dichloropropane 78875 20115221,2,3-trichloropropane 98184 2024861cis-1,3-dichloropropene 10061015 2331958trans-1,3-dic

48、hloropropene 10061026 2088265cis-1,2-dichloroethene 156592 2058597aChemical Abstracts Service Registry Number.bEC-Number. ISO 2016 All rights reserved 3BS EN ISO 22155:2016ISO 22155:2016(E)Compound name CAS-RNaEC-Nbtrans-1,2-dichloroethene 156605 20586023-chloropropene 107051 2034576Trichloroethene

49、79016 2016104Tetrachloroethene 127184 2048259Monochlorobenzene 108907 20362851,2-dichlorobenzene 95501 2024259aChemical Abstracts Service Registry Number.bEC-Number.4.4 Aliphatic ethersTable 5 contains aliphatic ethers for use as standard compounds.Table 5 Examples of aliphatic ethers suitable as standards compoundsCompound name CAS-RNaEC-Nbmethyl tert.-butyl ether (MTBE) 1634044 216