BS EN ISO 22391-5-2009 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Fitness for purpose of the system《冷热水装.pdf

1、BS EN ISO22391-5:2009ICS 23.040.01; 91.140.60; 93.025NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDPlastics piping systemsfor hot and coldwater installations Polyethylene of raisedtemperature resistance(PE-RT)Part 5: Fitness for purpose of thesystem (ISO 22391

2、-5:2009)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/04/2010 04:11, Uncontrolled Copy, (c) BSIThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 January2010. BSI 2010ISBN 978 0 580 70051 4Amendments/corrigenda issued since publicatio

3、nDate CommentsBS EN ISO 22391-5:2009National forewordThis British Standard is the UK implementation of EN ISO22391-5:2009.The UK participation in its preparation was entrusted to TechnicalCommittee PRI/88/2, Plastics piping for pressure applications.A list of organizations represented on this commit

4、tee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.Licensed Copy: Wang Bin, ISO/EXCHAN

5、GE CHINA STANDARDS, 07/04/2010 04:11, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 22391-5 December 2009 ICS 23.040.01; 91.140.60; 93.025 English Version Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance

6、 (PE-RT) - Part 5: Fitness for purpose of the system (ISO 22391-5:2009) Systmes de canalisations en plastique pour les installations deau chaude et froide - Polythylne de meilleure rsistance la temprature (PE-RT) - Partie 5: Aptitude lemploi du systme (ISO 22391-5:2009) Kunststoff-Rohrleitungssystem

7、e fr die Warm- und Kaltwasserinstallation - Polyethylen erhhter Temperaturbestndigkeit (PE-RT) - Teil 5: Gebrauchstauglichkeit des Systems (ISO 22391-5:2009) This European Standard was approved by CEN on 4 November 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which

8、 stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Sta

9、ndard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national s

10、tandards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United

11、 Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 22391-5:20

12、09: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/04/2010 04:11, Uncontrolled Copy, (c) BSIBS EN ISO 22391-5:2009EN ISO 22391-5:2009 (E) 3 Foreword This document (EN ISO 22391-5:2009) has been prepared by Technical Committee ISO/TC 138 “Plastics pipes, fittings and valves for the transp

13、ort of fluids“ in collaboration with Technical Committee CEN/TC 155 “Plastics piping systems and ducting systems” the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the lat

14、est by June 2010, and conflicting national standards shall be withdrawn at the latest by June 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such p

15、atent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ir

16、eland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 22391-5:2009 has been approved by CEN as a EN ISO 22391-5:2009 without any modification. Licen

17、sed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/04/2010 04:11, Uncontrolled Copy, (c) BSIBS EN ISO 22391-5:2009ISO 22391-5:2009(E) ISO 2009 All rights reserved iiiContents Page Foreword iv Introduction.v 1 Scope1 2 Normative references1 3 Terms, definitions, symbols and abbreviated terms .2 4 F

18、itness for purpose of joints and piping system .2 4.1 General .2 4.2 Internal pressure test3 4.3 Bending test.4 4.4 Pull-out test5 4.5 Thermal cycling test6 4.6 Pressure cycling test 7 4.7 Leaktightness under vacuum test .7 Bibliography8 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/04/2

19、010 04:11, Uncontrolled Copy, (c) BSIBS EN ISO 22391-5:2009ISO 22391-5:2009(E) iv ISO 2009 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is

20、 normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part

21、 in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to pr

22、epare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that

23、 some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 22391-5 was prepared by Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for the transport of fluids, Subcommittee SC 2,

24、 Plastics pipes and fittings for water supplies. This second edition cancels and replaces the first edition (ISO 22391-5:2007), which is extended from only dealing with PE-RT material (referred to as Type I) to cover PE-RT materials Type I and Type II. ISO 22391 consists of the following parts1), un

25、der the general title Plastics piping systems for hot and cold water installations Polyethylene of raised temperature resistance (PE-RT): Part 1: General Part 2: Pipes Part 3: Fittings Part 5: Fitness for purpose of the system 1) This System Standard does not incorporate a Part 4: Ancillary equipmen

26、t or a Part 6: Guidance for installation. For ancillary equipment, separate standards can apply. Guidance for installation of plastics piping systems made from different materials, intended to be used for hot and cold water installations, is covered by ENV 12108. Licensed Copy: Wang Bin, ISO/EXCHANG

27、E CHINA STANDARDS, 07/04/2010 04:11, Uncontrolled Copy, (c) BSIBS EN ISO 22391-5:2009ISO 22391-5:2009(E) ISO 2009 All rights reserved vIntroduction The System Standard, of which this is Part 5, specifies the requirements for a piping system and its components when made from polyethylene of raised te

28、mperature resistance (PE-RT). The piping system is intended to be used for hot and cold water installations. In respect of potential adverse effects on the quality of water intended for human consumption caused by the products covered by ISO 22391, the following are relevant. a) This part of ISO 223

29、91 provides no information as to whether the products can be used without restriction. b) Existing national regulations concerning the use and/or characteristics of the products remain in force. This part of ISO 22391 specifies the characteristics of fitness for purpose of the system. At the date of

30、 publication of this part of ISO 22391, System Standards Series for piping systems of other plastics materials used for the same application are the following: ISO 15874 (all parts), Plastics piping systems for hot and cold water installations Polypropylene (PP) ISO 15875 (all parts), Plastics pipin

31、g systems for hot and cold water installations Crosslinked polyethylene (PE-X) ISO 15876 (all parts), Plastics piping systems for hot and cold water installations Polybutylene (PB) ISO 15877 (all parts), Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (P

32、VC-C) Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/04/2010 04:11, Uncontrolled Copy, (c) BSIBS EN ISO 22391-5:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/04/2010 04:11, Uncontrolled Copy, (c) BSIBS EN ISO 22391-5:2009INTERNATIONAL STANDARD ISO 22391-5:2009(E) ISO 2009

33、All rights reserved 1Plastics piping systems for hot and cold water installations Polyethylene of raised temperature resistance (PE-RT) Part 5: Fitness for purpose of the system 1 Scope This part of ISO 22391 specifies the characteristics of the fitness for purpose of piping systems made of polyethy

34、lene of raised temperature resistance (PE-RT), Type I, and polyethylene of raised temperature resistance (PE-RT), Type II, intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not the water is intended for human consumption (domestic syste

35、ms) and for heating systems, under the design pressures and temperatures appropriate to the class of application according to ISO 22391-1. This part of ISO 22391 covers a range of service conditions (classes of application), design pressures and pipe dimension classes, and also specifies test parame

36、ters and test methods. In conjunction with the other parts of ISO 22391, it is applicable to PE-RT pipes, fittings, their joints, and to joints having components of PE-RT as well as of other plastics and non-plastics materials, respectively, used for hot and cold water installations. It is not appli

37、cable to values of design temperature, maximum design temperature or malfunction temperature in excess of those specified in ISO 22391-1. NOTE It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requiremen

38、ts and any relevant national regulations and installation practices or codes. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the refe

39、renced document (including any amendments) applies. ISO 1167-1, Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 1: General method ISO 1167-2, Thermoplastics pipes, fittings and assemblies for the conveyance of fluid

40、s Determination of the resistance to internal pressure Part 2: Preparation of pipe test pieces ISO 22391-1:2009, Plastics piping systems for hot and cold water installations Polyethylene of raised temperature resistance (PE-RT) Part 1: General ISO 22391-2:2009, Plastics piping systems for hot and co

41、ld water installations Polyethylene of raised temperature resistance (PE-RT) Part 2: Pipes Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/04/2010 04:11, Uncontrolled Copy, (c) BSIBS EN ISO 22391-5:2009ISO 22391-5:2009(E) 2 ISO 2009 All rights reservedEN 712, Thermoplastics piping systems

42、End-load bearing mechanical joints between pressure pipes and fittings Test method for resistance to pull-out under constant longitudinal force EN 713, Plastics piping systems Mechanical joints between fittings and polyolefin pressure pipes Test method for leaktightness under internal pressure of as

43、semblies subjected to bending EN 12293, Plastics piping systems Thermoplastics pipes and fittings for hot and cold water Test method for the resistance of mounted assemblies to temperature cycling EN 12294, Plastics piping systems Systems for hot and cold water Test method for leaktightness under va

44、cuum EN 12295, Plastics piping systems Thermoplastics pipes and associated fittings for hot and cold water Test method for resistance of joints to pressure cycling 3 Terms, definitions, symbols and abbreviated terms For the purposes of this document, the terms, definitions, symbols and abbreviated t

45、erms given in ISO 22391-1 apply. 4 Fitness for purpose of joints and piping system 4.1 General The joints and the piping system shall be tested in accordance with Table 1 and 4.2 to 4.7, as applicable. When tested, their characteristics shall be in accordance with the requirements of the correspondi

46、ng subclauses. For the tests given in Table 1, applicable for each of the different types of jointing system covered by this part of ISO 22391, the fittings shall be connected to the pipe with which they are intended to be used. Table 1 Joint tests Jointing system Test SW EF M Test parameters (subcl

47、ause of this part of ISO 22391 in which given) Test method Internal pressure test Yes Yes Yes 4.2 ISO 1167-1 and ISO 1167-2 Bending test N/A N/A Yes 4.3 EN 713 Pull-out test N/A N/A Yes 4.4 EN 712 Thermal cycling test Yes Yes Yes 4.5 EN 12293 Pressure cycling test N/A N/A Yes 4.6 EN 12295 Leaktightn

48、ess under vacuum test N/A N/A Yes 4.7 EN 12294 SW Socket fusion joint. EF Electrofusion joint. M Mechanical joint. Yes Test applicable. N/A Not applicable. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/04/2010 04:11, Uncontrolled Copy, (c) BSIBS EN ISO 22391-5:2009ISO 22391-5:2009(E) ISO

49、 2009 All rights reserved 34.2 Internal pressure test When tested in accordance with ISO 1167-1 and ISO 1167-2, using the test parameters specified in Table 2 or Table 3 for the relevant classes, the joint assemblies shall not leak. The test pressure, pJ, for a given time to failure and test temperature shall be determined using Equation (1): PJDDPpp= (1) where pJis the hydrostatic test pressure, in bar2), to be applied to the joint assembly during the test period; Pis the hyd