BS EN ISO 8205-1-2002 Water-cooled secondary connection cables for resistance welding Dimensions and requirements for double-conductor connection cables《电阻焊用水冷辅助连接电缆 双芯连接电缆的尺寸规格和要求.pdf

1、BRITISH STANDARD BS EN ISO 8205-1:2002 Incorporating Corrigendum No. 1 Water-cooled secondary connection cables for resistance welding Part 1: Dimensions and requirements for double-conductor connection cables The European Standard EN ISO 8205-1:2002 has the status of a British Standard ICS 25.160.3

2、0 BS EN ISO 8205-1:2002 This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 30 September 2002 BSI 4 August 2003 ISBN 0 580 40484 6 National forewor

3、d This British Standard is the official English language version of EN ISO 8205-1:2002. It is identical with ISO 8205-1:2002. It supersedes BS EN ISO 8205-1:1997 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee WEE/29, Resistance welding, which has the

4、 responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitl

5、ed “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance

6、with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related inter

7、national and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii and iii, a blank page, pages 1 to 5, the Annex ZA page, an inside back cover

8、and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments 14632 Corrigendum No. 1 4 August 2003 Replacing the EN ISO foreword page and incorporating the Annex ZA pageEUROPEANSTANDARD NOR

9、MEEUROPENNE EUROPISCHENORM ENISO82051 August2002 ICS25.160.30 SupersedesENISO82051:1996 Englishversion Watercooledsecondaryconnectioncablesforresistance weldingPart1:Dimensionsandrequirementsfordouble conductorconnectioncables(ISO82051:2002) Cblessecondairesrefroidispareaupourlesoudagepar rsistanceP

10、artie1:Dimensionsetexigencespourcbles deuxconducteurs(ISO82051:2002) WassergekhlteSekundranschlusskabelfrdas WiderstandsschweienTeil1:Abmessu ngenund AnforderungenfrZweileiterAnschlu sskabel(ISO8205 1:2002) ThisEuropeanStandardwasapprovedbyCENon24June2002. CENmembersareboundtocomplywiththeCEN/CENELE

11、CInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeo

12、fficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,Fran

13、ce,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2002CEN Allrightsofexploitationin

14、anyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.ENISO82051:2002ECORRECTED20030716 Foreword Thisdocument(ENISO82051:2002)hasbeenpreparedbyTechnicalCommitteeISO/TC44 “Weldingandalliedprocesses“incollaborationwithTechnicalCommitteeCEN/TC121 “Welding“,thesecretariatofwhichisheldbyDS.

15、 ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublication ofanidenticaltextorbyendorsement,atthelatestbyFebruary2003,andconflictingnational standardsshallbewithdrawnatthelatestbyFebruary2003. ThisdocumentsupersedesENISO82051:1996. AccordingtotheCEN/CENELECInternalRegulations,

16、thenationalstandardsorganizationsof thefollowingcountriesareboundtoimplementthisEuropeanStandard:Austria,Belgium, CzechRepublic,Denmark,Finland,France,Germany,Greece,Iceland,Ireland,Italy, Luxembourg,Malta,Netherlands,Norway,Portugal,Spain,Sweden,Switzerlandandthe UnitedKingdom. Endorsementnotice Th

17、etextofISO82051:2002hasbeenapprovedbyCENasENISO82051:2002withoutany modifications. NOTENormativereferencestoInternationalStandardsarelistedinannexZA(normative). ENISO82051:2002INTERNATIONAL STANDARD ISO 8205-1 Second edition 2002-08-01 Reference number ISO 8205-1:2002(E) Water-cooled secondary conne

18、ction cables for resistance welding Part 1: Dimensions and requirements for double- conductor connection cables Cbles secondaires refroidis par eau pour le soudage par rsistance Partie 1: Dimensions et exigences pour cbles deux conducteursENISO82051:2002ISO -50282:1)E(200 ii ISO 2002 Ar llithgr sere

19、svde FDP dicslaimre This FDP fam elitnoc yt deddebme niayfep.seca In roccatiw ecnadA hycilop gnisnecil sebod, thf sim eliarp eb ytnieiv ro dewb detu sllah ton eb tidesselnu de tt ehyfepseca hwich rae meil era deddebct desnetsni dna olat no delmoc ehtupre epfrromign tide ehti.gn In odaolnwding htis l

20、ife, rapticca setpe trehiet neh serilibisnopty fo ton fnirisebodA gnign ilop gnisnecilcy. TI ehSO tneCrceS larteraita catpecon s illibayti in ihts aera. ebodA si t armedarak fo dAS ebotsysme Inroctarop.de teDailfo s tfos ehtware prtcudos t desuo crtaet ehFDP si ff eb nac elit ni dnuoG ehlarene Info

21、talerive to tf eh;eli teh PDF-rctaeirap nomateers weer tpof dezimior rptnii.gn vErec yaeeb sah ert nakt neo rusnet etah tf ehi elis tiusbaf elob esu ry ISO merebm seidob. In the kilnuley evtne ttah a borpmel talerign to ti f si,dnuo saelpfni erom teh tneCS larterceratai ta thserdda es igvne olebw. I

22、SO 2002 Ar llieser sthgrvsselnU .de torehceps esiwfi,dei rap ont iht fos bupliactim noarper eb yro decudo tuzilina ni dey from b roy nasnaem y, tcelernahcem ro cinoicla, inclidung tohppocoying m dnaicrfomli, tiwtuoh permini noiss wrtif gnirmo ietI rehSO ta tserdda eheb slow or SIsO memreb ydob in to

23、c ehtnury fo tr ehtseuqeer. ISO copyrithg fofiec tsop esaCela 65 G 1121-HCeneva 02 T.le + 22 14 10 947 11 Fxa + 14 47 2290 9 74 E-liam cpoyrigthsio.ch Web wwwsi.oc.h ENISO82051:2002iiOSI -50282002:1)E( ISO 2002 r llAithgs reservde iii Foreword ISO (the International Organization for Standardization)

24、 is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be repre

25、sented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are

26、 drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a

27、vote. Attention is drawn to the possibility that some of the elements of this part of ISO 8205 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO 8205-1 was prepared by Technical Committee ISO/TC 44, Weldin

28、g and allied processes, Subcommittee SC 6, Resistance welding. This second edition cancels and replaces the first edition (ISO 8205-1:1993), which has been technically revised. ISO 8205 consists of the following parts, under the general title Water-cooled secondary connection cables for resistance w

29、elding: Part 1: Dimensions and requirements for double-conductor connection cables Part 2: Dimensions and requirements for single-conductor connection cables Part 3: Test requirements ENISO82051:2002iiiANRETNIITOTS LANDNADRA OSI -50282002:1)E( ISO 2002 r llAithgs reservde 1 Water-cooled secondary co

30、nnection cables for resistance welding Part 1: Dimensions and requirements for double-conductor connection cables 1 Scope This part of ISO 8205 specifies the dimensions of double-conductor connection cables used for resistance welding and allied processes. It stipulates the requirements regarding th

31、e electrical, mechanical and cooling characteristics of these cables and their conditions of use. 2 Normative reference The following normative document contains provisions which, through reference in this text, constitute provisions of this part of ISO 8205. For dated references, subsequent amendme

32、nts to, or revisions of, this publication do not apply. However, parties to agreements based on this part of ISO 8205 are encouraged to investigate the possibility of applying the most recent edition of the normative document indicated below. For undated references, the latest edition of the normati

33、ve document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 8205-3:1993, Water-cooled secondary connection cables for resistance welding Part 3: Test requirements 3 Term and definition For the purposes of this part of ISO 8205, the follo

34、wing term and definition applies. 3.1 double-conductor connection cable cable comprising two conductors providing an electrical link between the secondary terminals of a welding transformer and the welding set (manual or robotized guns) and designed so as to have as low an electrical reactance as po

35、ssible 4 Classification Double-conductor, water cooled connection cables are classified into two types, A and B, as shown in Table 1 according to the power factors which gives the relationship between resistance and reactance. Table 1 Double-conductor connection cables Type of double-conductor conne

36、ction cable Power factor A B cos cos 0,95 0,95 ENISO82051:20021ISO -50282:1)E(200 2 ISO 2002 Ar llithgr seresvde 5 Dimensions 5.1 Cross-sectional area The effective cross-sectional area of copper per conductor shall be one of the following (non-preferred values are given in parentheses): () 5.2 Leng

37、th The length, , of the cable shall be one of the following (non-preferred values are given in parentheses): () () () () () The length shall have a tolerance of . 5.3 End lugs The end lugs shall have the dimensions given in Figure 1 and Table 2. Dimensions in millimetres, surface roughness values in

38、 micrometres Key 1 Insulation 2 Polarity mark on both ends 3M a r k i n g 4 Insulating covering Figure 1 End lug 150 mm 2 160 mm 2 200 mm 2 250 mm 2 315 mm 2 L 1 000 mm 1 250 mm 1 500 mm 1 600 mm 1 800 mm 2 000 mm 2 240 mm 2 500 mm 2 800 mm 3 150 mm 3 550 mm 4 000 mm +1 0 % ENISO82051:20022OSI -5028

39、2002:1)E( ISO 2002 r llAithgs reservde 3 6 Designation The designation for double-conductor connection cables that comply with the requirements of this part of ISO 8205 shall comprise the following information in the order given: a) the description block (i.e. “double-conductor connection cable”); b

40、) reference to this part of ISO 8205, i.e. ISO 8205-1; c) the type of connection cable (i.e. A or B); d) the cross-sectional area of the cable, in square millimetres; e) the length, in millimetres. EXAMPLE A type A double-conductor connection cable having a cross-sectional area of and a length ofis

41、designated as follows: Double-conductor connection cable ISO 8205-1 A 22 0 0 2 500 7 Materials The choice of the materials is at the discretion of the manufacturer. The cable shall be free of silicone. The insulating covering and the insulation between the two end lugs shall be undamaged. In additio

42、n, these shall not contain any components which give off toxic gases on burning and shall withstand a maximum temperature ofwithout damage. 8 Requirements 8.1 Electrical characteristics 8.1.1 General The electrical characteristics are given as theoretical values as a function of cross-sectional area

43、s and lengths. The values are only given to calculate the permissible welding current and the voltage drop in the cable, they are not acceptance figures. 8.1.2 Permanent current The values for the permanent current are given in Table 3. The secondary current at a given duty factor may be calculated

44、from Table 2 Dimensions Cross-sectional area max. (150) 35 to 38 56 160 35 to 38 56 200 42 to 45 56 250 45 to 48 63 315 45 to 48 63 NOTE Non-preferred values are given in parentheses. bd mm 2 mm mm 2 200 mm 2 2 500 mm 100 C I 2p I X X I X =I 2p 100 X ENISO82051:20023ISO -50282:1)E(200 4 ISO 2002 Ar

45、llithgr seresvde It shall be taken into consideration that the values shall be reduced if parasitic heating occurs or other influences require it. 8.1.3 Resistance Resistance values for each conductor are given in Table 4. It shall be taken into consideration that, in practice, the values are higher

46、 depending on manufacturer and material. 8.2 Mechanical characteristics 8.2.1 Radius of curvature of ends With the tests carried out as described in 3.3 of ISO 8205-3:1993, the radius of curvature shall be equal to or less than (in view of the information given in 3.3.3 of ISO 8205-3:1993). 8.2.2 To

47、rsion With the test carried out as described in 3.4 of ISO 8205-3:1993, the torque required to produce a rotation of shall be less than . 8.3 Cooling A minimum water flow through the cable of shall be obtained with a maximum pressure differential at the cable ends of ( ) and with a radius of curvature applied at any point along the double-conductor connection cable. Table 3 Permanent current Length Cross-sectional area Permanent current A 1 000 7 500 8 000 9 000 10 000 11 200 1 250 6 700 7 100 8 000 9 000 10 000 (1 500) 6 300 6 500 7 300 8 200 9 200 1 600 6 000 6 300 7