BS EN ISO 8367-1-1995 Packaging Dimensional tolerances for general purpose sacks Paper sacks《包装 一般用途包装袋的尺寸公差 纸袋》.pdf

1、BRITISH STANDARD BS EN ISO 8367-1:1997 Incorporating Amendment No. 1 to BS ISO 8376-1:1993 (renumbers BS as BSEN ISO 8367-1: 1997) Packaging Dimensional tolerances for general purpose sacks Part 1: Paper sacks The European Standard EN ISO 8367-1:1996 has the status of a British Standard ICS 55.080BS

2、ENISO8367-1:1997 This British Standard, having been prepared under the directionof the Consumer Products and Services Sector Board, was published under theauthority of the StandardsBoard and comes intoeffect on 15March1997 BSI 08-1999 The following BSI references relate to the work on this standard:

3、 Committee reference PKW/2 Draft for comment 92/45592 DC ISBN 0 580 24438 5 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee PKW/2, Primary packaging, upon which the following bodies were represented: Association of Drum M

4、anufacturers Association of the British Pharmaceutical Industry Brewers present to the responsible international/European committee and enquirers on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate the

5、m in the UK. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This docume

6、nt comprises a front cover, an inside front cover, pages i and ii, theEN ISOtitle page, page 2, the ISO title page, pages ii to iv, pages 1 and 2, aninsideback cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated

7、 in the amendment table on theinside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 8367-1 August 1996 ICS 55.080 Descriptors: Packaging, paper packaging, bags, dimensional tolerances English version Packaging Dimensional tolerances for general purpose sacks Part 1: Paper sacks

8、 (ISO 8367-1:1993) Emballages Tolrances dimensionnelles des sacs dusage gnral Partie 1: Sacs en papier (ISO 8367-1:1993) Verpackung Matoleranzen fr Scke fr die allgemeine Verwendung Teil 1: Papierscke (ISO 8367-1:1993) This European Standard was approved by CEN on 1996-03-12. CEN members are bound t

9、o comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Centr

10、al Secretariat or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as th

11、e official versions. CEN members are the national standards, bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Euro

12、pen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1996 Copyright reserved to CEN members Ref. No. EN ISO 8367-1:1996 EENISO8367-1:1996 BSI 08-1999 2 Foreword The text of the International Standard from Technical Committee ISO/TC122 “Packagin

13、g” of the International Organization for Standardization (ISO) has been taken over as an European Standard by Technical Committee CEN/TC261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an ide

14、ntical text or by endorsement, at the latest by February 1997, and conflicting national standard shall be withdrawn at the latest by February 1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European

15、Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.ISO8367-1:1993(E) ii BSI 08-1999 Contents Page Foreword iii 1 Scope 1 2 Normative references 1 3 Tolerances 1 T

16、able 1 Tolerances on the dimensions of paper sacks 1ISO8367-1:1993(E) BSI 08-1999 iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out th

17、rough ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collab

18、orates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an InternationalStandard requires approval by a

19、t least75% of the member bodies casting a vote. International Standard ISO8367-1was prepared by Technical Committee ISO/TC122, Packaging, Sub-Committee SC 2, Sacks. ISO 8367 consists of the following parts, under the general title Packaging Dimensional tolerances for general purpose sacks: Part 1: P

20、aper sacks; Part 2: Sacks made from thermoplastic flexible film.iv blankISO8367-1:1993(E) BSI 08-1999 1 1 Scope This part of ISO8367specifies a set of tolerances applicable to the manufacture of paper sacks as defined in ISO 6590-1. 2 Normative references The following standards contain provisions w

21、hich, through reference in this text, constitute provisions of this part of ISO8367. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of ISO8367are encouraged to investigate the possibility of applying

22、the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 536:, Paper and board Determination of grammage 1) . ISO 6590-1:1983, Packaging Sacks Vocabulary and types Part 1: Paper sacks. ISO 6591-1:1984, Packag

23、ing Sacks Description and method of measurement Part 1: Empty paper sacks. ISO 7023:1983, Packaging Sacks Method of sampling empty sacks for testing. 3 Tolerances The paper sacks to be measured shall be sampled in accordance with ISO7023. The grammage of the plies shall be determined in accordance w

24、ith ISO536. The dimensions shall be described and measured in accordance with ISO6591-1. The tolerances of the dimensions shall be within the limits specified inTable 1. If closer tolerances are required, this shall be agreed between purchaser and supplier. Table 1 Tolerances on the dimensions of pa

25、per sacks 1) To be published. (Revision of ISO 536:1976) Dimensions in millimetres Description Symbol Tolerance Ply grammage 4 % Length of sack a 10 Width of sack b 5 Width of gusset e 5 Circumference of sack with gussets 10 Width of bottom c 5 Width of valve g pasted valve sewn valve Position of th

26、e leading edge of the valve sleeve (from the sack edge) l 5 Print position on sack in the direction of length 20 in the direction of width 15 +5 0 +10 02 blankENISO8367-1:1996 BSI 08-1999 Annex ZA (normative) Normative references to international publications with their relevant European publication

27、s This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these p

28、ublications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. Publication Date Title EN Date ISO 536 1995 Paper and board Determination of grammage EN ISO 536 1996 ISO 6590-1 1984 P

29、ackaging Sacks Vocabulary and types Part1:Paper sacks EN 26590-1 1992 ISO 6591-1 1985 Packaging Sacks Description and method of measurement Part 1: Empty paper sacks EN 26591-1 1992 ISO 7023 1983 Packaging Sacks Method of sampling empty sacks for testing EN 27023 1992BS EN ISO 8367-1:1997 BSI 389 Ch

30、iswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by

31、 amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandar

32、d would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions

33、of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been

34、 published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also availa

35、ble which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other b

36、enefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internationalstandardization bodies. Except as permitted under the Copyright, Designs and Patents Act

37、 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary detail

38、s such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.