1、BSI Standards PublicationBS EN ISO 8430-1:2016Resistance spot welding Electrode holdersPart 1: Taper fixing 1:10 (ISO 8430-1:2016)BS EN ISO 8430-1:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO8430-1:2016. It supersedes BS EN 28430-1:1992 which is with
2、drawn.The UK participation in its preparation was entrusted to TechnicalCommittee WEE/29, Resistance welding.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users
3、are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI StandardsLimited 2016ISBN 978 0 580 89281 3ICS 25.160.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theS
4、tandards Policy and Strategy Committee on 29 February 2016.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORMEN ISO 8430-1 February 2016 ICS 25.160.30 Supersedes EN 28430-1:1992English Version Resistance spot welding - Electrode holders - Part 1: T
5、aper fixing 1:10 (ISO 8430-1:2016) Soudage par points par rsistance - Porte-lectrodes - Partie 1: Cne de fixation 1:10 (ISO 8430-1:2016) Widerstandspunktschweien - Elektrodenhalter - Teil 1: Kegelige Befestigung 1:10 (ISO 8430-1:2016) This European Standard was approved by CEN on 30 December 2015. C
6、EN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on ap
7、plication to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
8、Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, L
9、atvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Ma
10、rnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 8430-1:2016 EBS EN ISO 8430-1:2016EN ISO 8430-1:2016 (E) 3 European foreword This document (EN ISO 8430-1:2016) has been prepared by Technical Commit
11、tee ISO/TC 44 “Welding and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied processes” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsem
12、ent, at the latest by August 2016, and conflicting national standards shall be withdrawn at the latest by August 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifyin
13、g any or all such patent rights. This document supersedes EN 28430-1:1992. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, De
14、nmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement
15、notice The text of ISO 8430-1:2016 has been approved by CEN as EN ISO 8430-1:2016 without any modification. BS EN ISO 8430-1:2016ISO 8430-1:2016(E)Foreword iv1 Scope .12 Normative references 13 Dimensions .14 Designation 15 Materials .26 Delivery conditions 27 Marking 2 ISO 2016 All rights reserved
16、iiiContents PageBS EN ISO 8430-1:2016ISO 8430-1:2016(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees.
17、Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the Internat
18、ional Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the differe
19、nt types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall n
20、ot be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is in
21、formation given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see
22、 the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 44, Welding and allied processes, Subcommittee SC 6, Resistance welding and allied mechanical joining.This second edition cancels and replaces the first edition (ISO 8430-1:1988), which has
23、been technically revised. The following changes have been made: in Clause 5, the second paragraph has been updated and there is no longer a reference to ISO 1642; the figures have been updated to comply with the latest ISO style and to reflect the latest edition of ISO 1302.ISO 8430 consists of the
24、following parts, under the general title Resistance spot welding Electrode holders: Part 1: Taper fixing 1:10 Part 2: Morse taper fixing Part 3: Parallel shank fixing for end thrustiv ISO 2016 All rights reservedBS EN ISO 8430-1:2016INTERNATIONAL STANDARD ISO 8430-1:2016(E)Resistance spot welding El
25、ectrode holders Part 1: Taper fixing 1:101 ScopeThis part of ISO 8430 specifies the dimensions and tolerances of resistance spot welding electrode holders (type A) without offset and with the facility for cable clamping, and where a male taper 1:10 is used to fix the holder directly to the welding c
26、ylinder in multiple spot welding equipment.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of th
27、e referenced document (including any amendments) applies.ISO 1302, Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentationISO 5182:2008, Resistance welding Materials for electrodes and ancillary equipmentISO 5183-1, Resistance welding equipment Elect
28、rode adaptors, male taper 1:10 Part 1: Conical fixing, taper 1:10ISO 5821, Resistance welding Spot welding electrode capsISO 5822, Spot welding equipment Taper plug gauges and taper ring gaugesISO 5828, Resistance welding equipment Secondary connecting cables with terminals connected to water-cooled
29、 lugs Dimensions and characteristicsISO 7285, Pneumatic cylinders for mechanized multiple spot weldingISO 9313, Resistance spot welding equipment Cooling tubes3 DimensionsThe dimensions shall be in accordance with Figure 1 and Table 1.4 DesignationThe designations of electrode holders which comply w
30、ith this part of ISO 8430 shall comprise the following information in the order given:a) the description block (i.e. “spot welding electrode holder”);b) a reference to this part of ISO 8430;c) the type of electrode holder (type A);d) the reference diameter, in millimetres;e) the total length, l4, in
31、 millimetres; ISO 2016 All rights reserved 1BS EN ISO 8430-1:2016ISO 8430-1:2016(E)f) the material of which the electrode adaptor is made, in accordance with ISO 5182.EXAMPLE A type A (taper fixing) spot welding electrode holder, of reference diameter 16 mm, total length l4= 103 mm and material type
32、 A 2/1, shall be designated as follows:Spot welding electrode holder ISO 8430-1-A-16 103-A 2/15 MaterialsThe material from which the electrode holder is made shall be in accordance with ISO 5182, preferably group A, type 2.The insulation shall be made from a material that is suitable for the applica
33、tion.6 Delivery conditionsThe fixing shall be protected against damage, e.g. by a coating of synthetic resin.7 MarkingElectrode holders complying with this part of ISO 8430 shall be marked with the designation in accordance with Clause 4, but excluding the description block and the reference number
34、of this part of ISO 8430, for example:A-16 103-A 2/12 ISO 2016 All rights reservedBS EN ISO 8430-1:2016ISO 8430-1:2016(E)Dimensions in millimetres,surface roughness values in micrometresKey1 designation mark2 water inlet3 water outlet4 insulation5 hexagon socket pipe plug6 pipe pluga for the taper g
35、auge, see ISO 5822NOTE Surface roughness in accordance with ISO 1302.Figure 1 Dimensions ISO 2016 All rights reserved 3BS EN ISO 8430-1:2016ISO 8430-1:2016(E)Table 1 DimensionsDimensions in millimetresReference diameterad1d2e l1l2l3l4tTotal length of cooling tubeb13 12,7 11,1 52 80 50 13 85 26 l5c+
36、1516 15,5 13,55280 50 138526 l5c+ 1670 10320 19 16,57090 60 2310336 l5c+ 2680 113aThe reference diameter corresponds to the electrode and electrode adaptor diameters.bSee ISO 9313.cSee ISO 5183-1.Key1 nut M12 6 electrode holder, see this part of ISO 84302 washer, clearance diameter 13 7 electrode ad
37、aptor, see ISO 93133 bolt M12 8 cooling tube type A, see ISO 93134 secondary connection cable, see ISO 5828 (position optional)9aelectrode cap, see ISO 5821see ISO 5183-15 welding cylinder, see ISO 7285Figure 2 Example of assembly4 ISO 2016 All rights reservedBS EN ISO 8430-1:2016This page deliberat
38、ely left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Stand
39、ards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embod
40、ied in our standards has been carefully assembled in a dependable format and ref_ined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your org
41、anization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, th
42、rough our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using standar
43、ds easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date.
44、 You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive
45、 the latest hard copy of your standards when theyre revised or replaced. To f_ind out more about becoming a BSI Subscribing Member and the benef_its of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as fe
46、w or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our prod
47、ucts and services to benef_it your business. If you f_ind an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British Standards and other BSI publications are the property of
48、 and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988
49、 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): cservicesbsigroup.c
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1