BS EN ISO 8503-5-2017 Preparation of steel substrates before application of paints and related products Surface roughness characteristics of blast-cleaned steel substrates Replica .pdf

1、BS EN ISO 8503-5:2017Preparation of steel substrates before application of paints and related products Surface r o u g h n e s s c h a r a c t e r i s t i c s o fblast-cleaned steel substratesPart 5: Replica tape method for the determination of the surface profile(ISO 8503-5:2017)BSI Standards Publi

2、cationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN ISO 8503-5:2017 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 8503-5:2017. It supersedes BS EN ISO 8503-5:2004 which iswithdrawn.The UK participation in its preparation was entrusted to Te

3、chnical Committee STI/21, Paint systems and surface preparation for metallic substrates.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for

4、 its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 76136 2 ICS 25.220.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy

5、 and Strategy Committee on 31 March 2017.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 8503-5 March 2017 ICS 25.220.10 Supersedes EN ISO 8503-5:2004English Version Preparation of steel substrates before application

6、of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile (ISO 8503-5:2017) Prparation des subjectiles dacier avant application de peintures et de produits assimils - Caractristiques

7、 de rugosit des subjectiles dacier dcaps - Partie 5: Mthode de lempreinte sur ruban adhsif pour la dtermination du profil de surface (ISO 8503-5:2017)Vorbereitung von Stahloberflchen vor dem Auftragen von Beschichtungsstoffen - Rauheitskenngren von gestrahlten Stahloberflchen - Teil 5: Abdruckverfah

8、ren zum Bestimmen der Rauheit (ISO 8503-5:2017) This European Standard was approved by CEN on 3 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alte

9、ration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language mad

10、e by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Eston

11、ia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE F

12、OR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 8503-5:2017 EBS EN ISO 8503-

13、5:2017EN ISO 8503-5:2017 (E) 3 European foreword This document (EN ISO 8503-5:2017) has been prepared by Technical Committee ISO/TC 35 “Paints and varnishes” in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of which is held by DIN. This European Standard sh

14、all be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2017, and conflicting national standards shall be withdrawn at the latest by September 2017. Attention is drawn to the possibility that some of the elements of thi

15、s document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 8503-5:2004. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countr

16、ies are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Pola

17、nd, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 8503-5:2017 has been approved by CEN as EN ISO 8503-5:2017 without any modification. BS EN ISO 8503-5:2017ISO 8503-5:2017(E)Foreword ivIntroduction v1 Scop

18、e . 12 Normative references 13 Terms and definitions . 14 Principle 15 Apparatus . 26 Maintenance and assurance of calibration for the replica tape method . 27 Procedure. 38 Specification of acceptable error. 39 Test report . 3Annex A (informative) Measurement errors associated with replica tape det

19、ermination of profile height 5Annex B (informative) Guidance on the correspondence between replica tape and ISO comparator determinations of profile height 6Annex C (informative) Grades of replica tape . 8Annex D (informative) Service life and storage recommendations for replica tape 9Bibliography .

20、10 ISO 2017 All rights reserved iiiContents PageBS EN ISO 8503-5:2017ISO 8503-5:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out th

21、rough ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collab

22、orates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval

23、 criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the su

24、bject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any

25、trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organizat

26、ion (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 12, Preparation of steel substrates before application of paints and related prod

27、ucts.This second edition cancels and replaces the first edition (ISO 8503-5:2003), which has been technically revised.A list of all parts in the ISO 8503 series can be found on the ISO website.iv ISO 2017 All rights reservedBS EN ISO 8503-5:2017ISO 8503-5:2017(E)IntroductionThe performance of protec

28、tive coatings of paint and related products applied to steel is significantly affected by the state of the steel surface immediately prior to painting. The principal factors that are known to influence this performance are:a) the presence of rust and mill scale;b) the presence of surface contaminant

29、s, including salts, dust, oils and greases;c) the surface profile.ISO 8501 (all parts), ISO 8502 (all parts) and ISO 8503 (all parts) have been prepared to provide methods of assessing these factors, while ISO 8504 (all parts) provides guidance on the preparation methods that are available for clean

30、ing steel substrates, indicating the capabilities of each in attaining specified levels of cleanliness.These International Standards do not contain recommendations for the protective coating systems to be applied to the steel surface. Neither do they contain recommendations for the surface quality r

31、equirements for specific situations, even though surface quality can have a direct influence on the choice of protective coating to be applied and on its performance. Such recommendations are found in other documents, such as national standards and codes of practice. It will be necessary for users o

32、f these International Standards to ensure that the qualities specified are: compatible and appropriate both for the environmental conditions to which the steel will be exposed and for the protective coating system to be used; within the capability of the cleaning procedure specified.The Internationa

33、l Standards referred to above deal with the following aspects of preparation of steel substrates: ISO 8501 Visual assessment of surface cleanliness; ISO 8502 Tests for the assessment of surface cleanliness; ISO 8503 Surface roughness characteristics of blast-cleaned steel substrates; ISO 8504 Surfac

34、e preparation methods.Each of these International Standards is in turn divided into separate parts.It is important to note that numerical characterization of a surface profile is meaningful only when accompanied by an understanding of the errors of measurement and by the realization that different t

35、echniques may yield somewhat different numerical values for the profile. Estimates of measurement error associated with different techniques can be obtained from national or international standards or from the equipment manufacturers. As shown in Annex B, values given by the replica tape method alig

36、n well with those obtained using other parts of ISO 8503.Information regarding the magnitude of errors associated with use of replica tape is given in Annex A.Advantages of the replica tape method include the fact that it affords numerical characterization, yields a permanent record, works well on c

37、urved surfaces and benefits from a geographically broad base of user experience over a period of several decades. ISO 2017 All rights reserved vBS EN ISO 8503-5:2017BS EN ISO 8503-5:2017Preparation of steel substrates before application of paints and related products Surface roughness characteristic

38、s of blast-cleaned steel substrates Part 5: Replica tape method for the determination of the surface profile1 ScopeThis document describes a field method for measuring the surface profile produced by any of the abrasive blast-cleaning procedures given in ISO 8504-2. The method uses replica tape and

39、a suitable gauge for measuring, on site, the roughness of a surface before the application of paint or another protective coating.The method is applicable within the range of profile heights cited for a given grade (or thickness) of replica tape. The commercial grades currently available permit meas

40、urement of average peak-to-valley profiles of 20 m to 115 m. The method is valid for surfaces that have been cleaned with abrasives.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For

41、 dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 4618, Paints and varnishes Terms and definitionsISO 8503-1, Preparation of steel substrates before application of paints and related product

42、s Surface roughness characteristics of blast-cleaned steel substrates Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 4618

43、and ISO 8503-1 apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at h t t p :/ www .electropedia .org/ ISO Online browsing platform: available at h t t p :/ www .iso .org/ obp4 PrincipleThe replica film in replica t

44、ape consists of a layer of crushable plastic microfoam coated onto a polyester substrate of highly uniform thickness (50 m 2 m). When compressed against a hard surface, the microfoam collapses and acquires an impression of the surface. The thickness of the replica is a measure of the surface profile

45、.When the replica film is coated with a thin (80 nm) layer of a ductile and optically reflective metal, such as indium, the replicated surface can be studied with an optical interferometric profiler. When the film INTERNATIONAL STANDARD ISO 8503-5:2017(E) ISO 2017 All rights reserved 1BS EN ISO 8503

46、-5:2017ISO 8503-5:2017(E)is coated with a similarly thin layer of a ductile and electron-emissive metal, such as gold, platinum or palladium, the replica may be studied with an electron microscope.NOTE This method measures an “average maximum peak-to-valley profile” because the anvils of the microme

47、ter gauge flatten the replica profile slightly so that the reading equates to an average maximum value, though this is not the same as a mathematical average.5 Apparatus5.1 Replica tape, consisting of a square piece of replica film (measuring approximately 10 mm along each side) attached to adhesive

48、-backed paper tape. The film shall be mounted over a hole (approximately 10 mm in diameter) in the centre of a section of the paper tape (approximately 53 mm 19 mm in size), which is printed with the grade of tape and the corresponding range of profile heights.NOTE Grades of replica tape are availab

49、le for measurement of profiles between 20 m and 64 m (“Coarse” grade) and between 38 m and 115 m (“X-Coarse” grade). Additional grades permit checking measurements at or near the low (20 m) and high (115 m) ends of this range. See Annex C.The tapes adhesive backing prevents movement of the replica film during the test and allows the sample identification and measured profile parameters to be recorded.The crushed microfoam can be further compressed and should therefore be handled with care, especially when m