BS EN ISO 8752-2009 Spring-type straight pins - Slotted heavy duty (ISO 8752 2009)《弹簧型开口直销 重负荷开槽式(ISO 8752-2009)》.pdf

1、BS EN ISO8752:2009ICS 21.060.50NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDSpring-type straightpins Slotted, heavyduty (ISO 8752:2009)This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2009. BSI

2、2009ISBN 978 0 580 63526 7Amendments/corrigenda issued since publicationDate CommentsBS EN ISO 8752:2009National forewordThis British Standard is the UK implementation of EN ISO 8752:2009. It supersedes BS EN ISO 8752:1998 which is withdrawn.The UK participation in its preparation was entrusted to T

3、echnical Committee FME/9/3, Product standards for fasteners.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Com

4、pliance with a British Standard cannot confer immunity from legal obligations.EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 8752June 2009ICS 21.060.50 Supersedes EN ISO 8752:1997 English VersionSpring-type straight pins - Slotted, heavy duty (ISO 8752:2009)Goupilles cylindriques creuses, dit

5、es goupilles lastiques -Srie paisse (ISO 8752:2009)Spannstifte (-hlsen) - Geschlitzt, schwere Ausfhrung(ISO 8752:2009)This European Standard was approved by CEN on 6 June 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Eur

6、opeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English

7、, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cypr

8、us, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT

9、EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 8752:2009: EBS EN ISO 8752:2009EN ISO 8752:2009 (E) 3 Foreword This d

10、ocument (EN ISO 8752:2009) has been prepared by Technical Committee ISO/TC 2 “Fasteners“ in collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an iden

11、tical text or by endorsement, at the latest by December 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be he

12、ld responsible for identifying any or all such patent rights. This document supersedes EN ISO 8752:1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cypru

13、s, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 875

14、2:2009 has been approved by CEN as a EN ISO 8752:2009 without any modification. BS EN ISO 8752:2009ISO 8752:2009(E) ISO 2009 All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work o

15、f preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmenta

16、l, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main

17、 task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Atte

18、ntion is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 8752 was prepared by Technical Committee ISO/TC 2, Fasteners, Subcommittee SC 10, Product standards f

19、or fasteners. This third edition cancels and replaces the second edition (ISO 8752:1997), which has been technically revised. BS EN ISO 8752:2009BS EN ISO 8752:2009INTERNATIONAL STANDARD ISO 8752:2009(E) ISO 2009 All rights reserved 1Spring-type straight pins Slotted, heavy duty 1 Scope This Interna

20、tional Standard specifies the characteristics of slotted spring-type straight pins, made of steel or of austenitic or martensitic stainless steel, heavy duty, with nominal diameter, d1, from 1 mm to 50 mm inclusive. NOTE The nominal diameters have been chosen in such a way that pins can be fitted on

21、e into the other or combined with pins, light duty, in accordance with ISO 13337. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the

22、referenced document (including any amendments) applies. ISO 3269, Fasteners Acceptance inspection ISO 4042, Fasteners Electroplated coatings ISO 6507-1, Metallic materials Vickers hardness test Part 1: Test method ISO 8749, Pins and grooved pins Shear test 3 Dimensions See Figure 1 and Table 1. aFor

23、 slotted spring-type straight pins with a nominal diameter d1W 10 mm, a single chamfer configuration is optional at the discretion of the supplier. bd3 d1, nom.NOTE For non-interlocking slotted spring-type straight pins (slot type N), see Clauses 5 and 6. Figure 1 Slotted spring-type straight pins,

24、heavy duty BS EN ISO 8752:2009ISO 8752:2009(E) 2 ISO 2009 All rights reservedTable 1 Dimensions nom. 1 1,5 2 2,5 3 3,5 4 4,5 5 6 8 10 max. 1,3 1,8 2,4 2,9 3,5 4,0 4,6 5,1 5,6 6,7 8,8 10,8 d1before mounting min. 1,2 1,7 2,3 2,8 3,3 3,8 4,4 4,9 5,4 6,4 8,5 10,5 d2before mountinga0,8 1,1 1,5 1,8 2,1 2,

25、3 2,8 2,9 3,4 4,0 5,5 6,5 max. 0,35 0,45 0,55 0,6 0,7 0,8 0,85 1,0 1,1 1,4 2,0 2,4 a min. 0,15 0,25 0,35 0,4 0,5 0,6 0,65 0,8 0,9 1,2 1,6 2,0 s 0,2 0,3 0,4 0,5 0,6 0,75 0,8 1,0 1,0 1,2 1,5 2,0 Minimum shear strength, doublebkN 0,7 1,58 2,82 4,38 6,32 9,06 11,24 15,36 17,54 26,04 42,76 70,16 l cnom.

26、min. max. 4 3,75 4,25 5 4,75 5,25 6 5,75 6,25 8 7,75 8,25 10 9,75 10,25 12 11,5 12,5 14 13,5 14,5 16 15,5 16,5 Range 18 17,5 18,5 20 19,5 20,5 22 21,5 22,5 24 23,5 24,5 26 25,5 26,5 28 27,5 28,5 of 30 29,5 30,5 32 31,5 32,5 35 34,5 35,5 40 39,5 40,5 45 44,5 45,5 50 49,5 50,5 55 54,25 55,75 60 59,25

27、60,75 65 64,25 65,75 70 69,25 70,75 75 74,25 75,75 80 79,25 80,75 85 84,25 85,75 90 89,25 90,75 95 94,25 95,75 100 99,25 100,75 120 119,25 120,75 140 139,25 140,75 160 159,25 160,75 180 179,25 180,75 200 199,25 200,75 aFor reference only. bApplies to steel and martensitic corrosion resistant steel p

28、roducts only. For austenitic stainless pins, no double shear strength values are specified. cFor nominal lengths above 200 mm, steps of 20 mm. BS EN ISO 8752:2009ISO 8752:2009(E) ISO 2009 All rights reserved 3Dimensions in millimetres 12 13 14 16 18 20 21 25 28 30 32 35 38 40 45 50 12,8 13,8 14,8 16

29、,8 18,9 20,9 21,9 25,9 28,9 30,9 32,9 35,9 38,9 40,9 45,9 50,9 12,5 13,5 14,5 16,5 18,5 20,5 21,5 25,5 28,5 30,5 32,5 35,5 38,5 40,5 45,5 50,5 7,5 8,5 8,5 10,5 11,5 12,5 13,5 15,5 17,5 18,5 20,5 21,5 23,5 25,5 28,5 31,5 2,4 2,4 2,4 2,4 2,4 3,4 3,4 3,4 3,4 3,4 3,6 3,6 4,6 4,6 4,6 4,6 2,0 2,0 2,0 2,0

30、2,0 3,0 3,0 3,0 3,0 3,0 3,0 3,0 4,0 4,0 4,0 4,0 2,5 2,5 3,0 3,0 3,5 4,0 4,0 5,0 5,5 6,0 6,0 7,0 7,5 7,5 8,5 9,5 104,1 115,1 144,7 171 222,5 280,6 298,2 438,5 542,6 631,4 684 859 1 003 1 068 1 360 1 685 comercial lengths BS EN ISO 8752:2009ISO 8752:2009(E) 4 ISO 2009 All rights reserved4 Application

31、The diameter of the hole into which the spring pin is to be inserted shall be equal to the nominal diameter, d1, of the mating pin and to tolerance class H12. When mounted in the smallest permitted hole, the slot shall not fully close. 5 Requirements and reference International Standards See Table 2

32、. Table 2 Requirements and reference International Standards Steel Austenitic stainless steelMartensitic stainless steel St A C Steel (St) at the suppliers discretion, either: Chemical composition limits (check analysis) % Plain carbon steel with C W 0,65 % Mn W 0,5 % (check analysis) Hardened and t

33、empered to a Vickers hardness of 420 HV to 520 HV or austempered to a Vickers hardness of 500 HV to 560 HV. C u 0,15 Mn u 2,00 Si u 1,50 Cr 16 to 20Ni 6 to 12 P u 0,045S u 0,03 Mo u 0,8 C W 0,15 Mn u 1,00 Si u 1,00 Cr 11,5 to 14 Ni u 1,00 P u 0,04 S u 0,03 or Silicon manganese steel with C W 0,5 % S

34、i W 1,5 % Mn W 0,7 % Cold worked Hardened and tempered to a Vickers hardness of 440 HV to 560 HV (check analysis) MaterialaHardened and tempered to a Vickers hardness of 420 HV to 560 HV. Hardness testing in accordance with ISO 6507-1. Hardness testing in accordance with ISO 6507-1 Normal case Form

35、and width of slot at the discretion of the supplier. Slot Type N Non-interlocking pins with a form and/or width of slot which guarantees no interlocking may be supplied by special agreement between the customer and supplier. Plain, i.e. pins to be supplied in natural finish, treated with a protectiv

36、e lubricant, unless otherwise specified by agreement between the customer and the supplier. Surface finish If pins are surface coated, appropriate plating or coating processes should be employed to avoid hydrogen embrittlement. Due to the risk of hydrogen embrittlement, pins should not be electropla

37、ted or phosphate-coated. If electroplating or phosphate coating is required for corrosion prevention, by agreement between the customer and the supplier, it is mandatory that the pins be baked immediately after plating to minimize the risk of hydrogen embrittlement; see also information on hydrogen

38、embrittlement relief in ISO 4042. Nevertheless, freedom from hydrogen embrittlement is not absolutely guaranteed.All tolerances shall apply prior to the application of a plating or coating. Plain, i. e. pins to be supplied in natural finish. Workmanship Pins shall be free of irregularities or detrim

39、ental defects. No burrs shall appear on any part of the pin. Shear strength test The test shall be in accordance with ISO 8749. Acceptability The acceptance procedure is specified in ISO 3269. aFor other materials, as agreed between the customer and supplier. BS EN ISO 8752:2009ISO 8752:2009(E) ISO

40、2009 All rights reserved 56 Designation EXAMPLE 1 A slotted spring-type straight pin, heavy duty, with nominal diameter d1= 6 mm and nominal length l = 30 mm, made of steel (St), is designated as follows: Spring pin ISO 8752-6 30-St EXAMPLE 2 A non-interlocking slotted spring-type straight pin (N),

41、heavy duty, with nominal diameter d1= 6 mm and nominal length l = 30 mm, made of martensitic stainless steel (C), is designated as follows: Spring pin ISO 8752-6 30-N-C BS EN ISO 8752:2009ISO 8752:2009(E) 6 ISO 2009 All rights reservedBibliography 1 ISO 13337, Spring-type straight pins Slotted, ligh

42、t duty BS EN ISO 8752:2009BS EN ISO8752:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in

43、 Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our produc

44、ts and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI off

45、ers members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44

46、 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Inform

47、ation on standardsBSI provides a wide range of information on national, European andinternational standards through its Library and its Technical Help to ExportersService. Various BSI electronic information services are also available whichgive details on all its products and services. Contact Infor

48、mation Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British StandardsOnline can be found at http:/ inform