BS EN ISO 8936-2017 Awnings for leisure accommodation vehicles Requirements and test methods《休闲旅居车辆用遮篷 要求和试验方法》.pdf

1、BS EN ISO 8936:2017Awnings for leisureaccommodation vehicles Requirements and testmethodsBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN ISO 8936:2017 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 8936:2017. It supers

2、edes BS EN ISO 8936:2009 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee SW/136/11, Sleeping bags and tents.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all

3、 the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2017. Published by BSI Standards Limited 2017ISBN 978 0 580 82550 7ICS 43.100; 97.200.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This Bri

4、tish Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2017.Amendments/Corrigenda issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 8936 January 2017 ICS 43.100; 97.200.30 Supersedes EN ISO 8936:200

5、9English Version Awnings for leisure accommodation vehicles - Requirements and test methods (ISO 8936:2017) Auvents pour vhicules de loisirs habitables - Exigences et mthodes dessai (ISO 8936:2017) Vorzelte fr bewohnbare Freizeitfahrzeuge - Anforderungen und Prfverfahren (ISO 8936:2017) This Europea

6、n Standard was approved by CEN on 21 December 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references con

7、cerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member i

8、nto its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,

9、 Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCH

10、ES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 8936:2017 EBS EN ISO 8936:2017EN ISO 8936:2017 (E) 3 European foreword This document (E

11、N ISO 8936:2017) has been prepared by Technical Committee ISO/TC 83 “Sports and other recreational facilities and equipment“ in collaboration with Technical Committee CEN/TC 136 “Sports, playground and other recreational facilities and equipment” the secretariat of which is held by DIN. This Europea

12、n Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2017 and conflicting national standards shall be withdrawn at the latest by July 2017. Attention is drawn to the possibility that some of the elements of t

13、his document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 8936:2009. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countr

14、ies are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Pola

15、nd, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 8936:2017 has been approved by CEN as EN ISO 8936:2017 without any modification. BS EN ISO 8936:2017ISO 8936:2017(E)Foreword vIntroduction vi1 Scope . 12 N

16、ormative references 13 Terms and definitions . 24 Classification of awnings 54.1 Winter awning (Type W) 54.2 Residential awning (Type R) . 54.3 Touring awning (Type T) . 64.4 Light-weight awning (Type L) . 65 Requirements 65.1 Dimensions . 65.1.1 General 65.1.2 Entrance/exit dimensions . 65.1.3 Stan

17、ding height . 65.1.4 Awning perimeter size 65.2 Fabrics 75.2.1 General 75.2.2 Coated or laminated roofs made of fabrics for types W, R, T and L 85.2.3 Non-coated roofs made of fabrics for types W, R, T, and L . 85.2.4 Coated or laminated walls made of fabrics for types W, R, T, and L . 85.2.5 Non-co

18、ated walls made of fabrics for types W, R, T, and L . 85.2.6 Resistance to cracking at low temperatures 95.2.7 Dimensional stability . 95.2.8 Colour fastness 95.2.9 Resistance to weathering . 95.2.10 Flammability 105.3 Zip fasteners . 105.4 Frame assembly. 105.5 Guying and ground fastening . 115.6 M

19、etallic parts . 125.7 Awning attachment to the vehicle . 125.8 Ventilation 125.9 Draught exclusion 125.9.1 External mud wall 125.9.2 Internal mud wall .125.10 Window-cover 125.11 Rain resistance . 125.12 Resistance to roof load 135.13 Accessories 135.14 Means of escape 136 Testing 136.1 General 136.

20、2 Zip fasteners . 136.3 Frame assembly. 146.3.1 Test of load capacity .146.3.2 Corrosion . 146.3.3 Testing of the shearing and crushing points .146.4 Guying system, ground fastening and mud wall pegging points .156.4.1 Guying system .156.4.2 Ground fastening and mud wall pegging points 156.5 Awning

21、attachment (channel cord) . 16 ISO 2017 All rights reserved iiiContents PageBS EN ISO 8936:2017ISO 8936:2017(E)6.6 Rain resistance . 166.6.1 General. 166.6.2 Rain-shower test .176.6.3 Resistance of seams and material to water ingress from pooled water (trough test) 177 Marking .187.1 Warning notices

22、 187.2 Product identification 198 Information supplied by the manufacturer 198.1 Information at the point of sale . 198.2 Information accompanying the awning 20Annex A (informative) Warning notice for fire prevention and ventilation advice 22Annex B (informative) Warning notice fire flame retardant

23、precautions 24Annex C (informative) Example for the display of information at the point of sale .25Bibliography .26iv ISO 2017 All rights reservedBS EN ISO 8936:2017ISO 8936:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies

24、 (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations,

25、governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further mai

26、ntenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directivesAttention

27、 is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and

28、/or on the ISO list of patent declarations received. www.iso.org/patentsAny trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessme

29、nt, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see the following URL: http:/www.iso.org/iso/foreword.htmlThe committee responsible for this document is ISO/TC 83, Sports and other recreational facilities and

30、equipment.This fourth edition cancels and replaces the third edition (ISO 8936:2007) which has been technically revised.The main changes include the following:a) terms and definitions updated;b) new type of awnings “Light-weight awnings (Type L)” added;c) roofs and walls divided into “coated and lam

31、inated” and “non-coated”;d) in 5.1.3 “Awning perimeter size”, the relation between awning and vehicle clarified;e) in 5.2.1 “General”, requirements inner tents specified in regard to ISO 5912;f) in 5.8 “Ventilation”, requirements for sewn in ground sheets formulated;g) in 5.12 “Resistance to roof lo

32、ading”, requirements modified;h) in 6.6.2 “Rainshower test”, test method modified;i) in 6.6.3 “Resistance of seams and material to water ingress from pooled water (trough test)”, testmethod for seam tightness simplified and two new figures added;j) Clause 7 “Marking” modified and restructured;k) Cla

33、use 8 “Information supplied by the manufacturer”, modified and restructured;l) warning notices transformed into annexes;m) new Annex C added as an example for customer information prior to purchase. ISO 2017 All rights reserved vBS EN ISO 8936:2017ISO 8936:2017(E)IntroductionGeneralThe principal obj

34、ective of this document is to simplify it from previous editions. It combines test requirements and product requirements into one document, providing manufacturers, specifiers and consumers with a single reference point for the safety and quality performance of awnings.The traditional frame assembly

35、 mechanism for awnings has been a system of structural tubular or sectioned metal poles. This has recently evolved to include flexible pole systems and inflatable tube systems. Over the course of revision of this document it has been possible to consider some but not all aspects of these changes. In

36、 particular no specific requirements have been given for inflatable systems. It is intended that these will be addressed if required at the next revision.Environmental considerationsEvery product affects the environment in the course of its lifecycle from raw material acquisition through production,

37、 distribution and use, to disposal. Environmental impacts are consequences of the consumption of energy and resources and the generation of waste, as well as the emission of substances into air, water and soil. The magnitude of the environmental impacts during the various lifecycle changes depends o

38、n a number of choices made in the design of the product, such as the materials used, production methods, and considerations related to maintenance and recycling. Manufacturers and distributors of awnings for leisure accommodation vehicles should consider the environmental impact of their product by,

39、 for example: avoiding the use of environmentally harmful substances; selecting the best available technology and techniques to reduce consumption of energy and materials; considering use of recycled materials for product and packaging; encouraging responsible end of life disposal by the user includ

40、ing guidance on separation and identification of any recyclable components and packaging; using materials, components, and manufacturing facilities which have declared documented; environmental policies.vi ISO 2017 All rights reservedBS EN ISO 8936:2017Awnings for leisure accommodation vehicles Requ

41、irements and test methods1 ScopeThis document specifies requirements, test methods and material performance characteristics for vehicle awnings. It applies to awnings intended to be pitched and struck.This document is not applicable to:a) sun awnings: structure detachable from the vehicle which is u

42、sed to provide shelter from the sun,but is not designed or constructed to provide shelter from wind, rain or snow;NOTE 1 A sun awning can be used with additional front and side panels to form an enclosure, but thisenclosure would not meet the requirements of an awning as defined in this document.b)

43、external blinds: structure permanently fixed to a vehicle which is used to provide shelter from thesun, but is not designed or constructed to provide shelter from wind, rain or snow;NOTE 2 An external blind can be used with additional front and side panels to form an enclosure, but thisenclosure wou

44、ld not meet the requirements of an awning as defined in this document.c) fixed awnings: permanent awning which is not designed for mobile use.EXAMPLE Awnings equipped with square aluminium frames or timber supporting structures and the possibility to install living compartment windows and doors.2 No

45、rmative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any

46、amendments) applies.ISO 105-B02, Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp testISO 105-B04, Textiles Tests for colour fastness Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp testISO 105-E01, Textiles Tests for c

47、olour fastness Part E01: Colour fastness to waterISO 105-X12, Textiles Tests for colour fastness Part X12: Colour fastness to rubbingISO 811, Textile fabrics Determination of resistance to water penetration Hydrostatic pressure testISO 1421, Rubber- or plastics-coated fabrics Determination of tensil

48、e strength and elongation at breakISO 2081, Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steelISO 4675:1990, Rubber- or plastics-coated fabrics Low-temperature bend testISO 4892-2:2013, Plastics Methods of exposure to laboratory light

49、sources Part 2: Xenon-arc lampsISO 5912:2011, Camping tentsISO 6925, Textile floor coverings Burning behaviour Tablet test at ambient temperatureINTERNATIONAL STANDARD ISO 8936:2017(E) ISO 2017 All rights reserved 1BS EN ISO 8936:2017ISO 8936:2017(E)ISO 6941:2003, Textile fabrics Burning behaviour Measurement of flame spread properties of vertically oriented specimensISO 7152, Camping tents and caravan awnings Vocabulary and list of equivalent termsISO 7771, Textiles Determination of dimensional changes o