BS EN ISO 9046-2005 Building construction - Jointing products - Determination of adhesion cohesion properties of sealants at constant temperature《建筑施工 连接产品 恒温下密封剂的粘附 粘结性能的测定》.pdf

1、BRITISH STANDARDBS EN ISO 9046:2004Building construction Jointing products Determination of adhesion/cohesion properties of sealants at constant temperatureThe European Standard EN ISO 9046:2004 has the status of a British StandardICS 91.100.50g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g3

2、7g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN ISO 9046:2004This British Standard was published under the authority of the Standards Policy and Strategy Committee on 24 August 2005 BSI 24 August 20

3、05ISBN 0 580 46186 6National forewordThis British Standard is the official English language version of EN ISO 9046:2004. It is identical with ISO 9046:2002. It supersedes BS EN 29046:1991 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/547, Sealants

4、for building and construction, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international publications referred to in this document may be found in the BSI Cata

5、logue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its cor

6、rect application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests inform

7、ed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii and iii, a blank page, pages 1 to 4, an inside back co

8、ver and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORMEN ISO 9046 December 2004 ICS 91.100.50 Supersedes EN 29046:1990 English vers

9、ion Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature (ISO 9046:2002) Construction immobilire - Produits pour joints - Dtermination des proprits dadhsivit/cohsion des mastics temprature constante (ISO 9046:2002) Hochbau - Fu

10、gendichtstoffe - Bestimmung des Haft- und Dehnverhaltens von Dichtstoffen bei konstanter Temperatur (ISO 9046:2002) This European Standard was approved by CEN on 21 December 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

11、 EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (Eng

12、lish, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, C

13、zech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE

14、 NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 9046:2004: EForeword The text of ISO 9046:2002 has been prepared by Techn

15、ical Committee ISO/TC 59 “Building construction” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 9046:2004 by CMC. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at t

16、he latest by June 2005, and conflicting national standards shall be withdrawn at the latest by June 2005. This document supersedes EN 29046:1990. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European St

17、andard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement noticeTh

18、e text of ISO 9046:2002 has been approved by CEN as EN ISO 9046:2004 without any modifications. EN ISO 9046:2004INTERNATIONAL STANDARDISO 9046Second edition 2002-05-01Reference numberISO 9046:2002(E)Building construction Jointing products Determination of adhesion/cohesion properties of sealants at

19、constant temperatureConstruction immobilire Produits pour joints Dtermination des proprits dadhsivit/cohsion des mastics temprature constanteEN ISO 9046:2004ii iiiForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodie

20、s). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and n

21、on-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Par

22、t 3.Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of th

23、is International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.International Standard ISO 9046 was prepared by Technical Committee ISO/TC 59, Building construction, Subcommittee SC 8, Jointing products.This second editio

24、n cancels and replaces the first edition (ISO 9046:1987), which has been technically revised.EN ISO 9046:2004blank1Building construction Jointing products Determination of adhesion/cohesion properties of sealants at constant temperature1 ScopeThis International Standard specifies a method for the de

25、termination of the adhesion/cohesion properties of sealantswith predominantly plastic behaviour which are used in joints in building construction.2 Normative referencesThe following normative documents contain provisions which, through reference in this text, constitute provisions ofthis Internation

26、al Standard. For dated references, subsequent amendments to, or revisions of, any of thesepublications do not apply. However, parties to agreements based on this International Standard are encouraged toinvestigate the possibility of applying the most recent editions of the normative documents indica

27、ted below. Forundated references, the latest edition of the normative document referred to applies. Members of ISO and IECmaintain registers of currently valid International Standards.ISO 6927, Building construction Jointing products Sealants VocabularyISO 13640, Building construction Jointing produ

28、cts Specifications for test substrates3 Terms and definitionsFor the purposes of this International Standard, the terms and definitions given in ISO 6927 apply.4 PrincipleTest specimens are prepared in which the sealant to be tested adheres to two parallel surfaces. After submission tocycles of comp

29、ression and extension, the test specimens are examined for evidence of loss of adhesion or cohesion.5Apparatus5.1 Substrate materials, mortar or anodized aluminium or glass, used for the preparation of test specimens aredefined in ISO 13640. Other substrate materials may be used as agreed by the par

30、ties concerned.For each test specimen, two substrate pieces of the same material are required with dimensions as shown inFigures 1 and 2. Test substrates of other dimensions may be used, but the dimensions of the sealant bead and thearea of adhesion shall be the same as those shown in Figures 1 and

31、2.5.2 Spacers, for the preparation of the test specimens, of dimensions with anti-adherent surface (see Figures 1 and 2).5.3 Anti-adherent substrate, for the preparation of test specimens, e.g. polyethylene (PE) film, preferablyaccording to the advice of the sealant manufacturer.5.4 Ventilated conve

32、ction-type oven, capable of being maintained at .5.5 Container for water immersion of the specimen, for conditioning according to method B.12 mm12 mm12,5 mm(702)CEN ISO 9046:200425.6 Test machine, capable of carrying out extension/compression cycles at a rate of .5.7 Measuring device, scaled in .6 P

33、reparation of test specimensThe sealant and the substrate shall be brought to . For each substrate material selected, three test specimens shall be prepared.For each test specimen, two substrates (5.1) and two spacers (5.2) shall be assembled (see Figures 1 and 2) and set up on the anti-adherent sub

34、strate (5.3).The instructions of the sealant manufacturer concerning, for instance, whether a primer is to be used and the mixing procedure for multi-component sealants shall be followed. The hollow formed by the substrates shall be filled with the sealant.Dimensions in millimetresKey1 Mortar substr

35、ates2 Sealant3 SpacerFigure 1 Test specimen with mortar substrates(1 0,2) mm/min0,5 mm(23 2) CEN ISO 9046:20043The following precautions shall be taken:a) the formation of air bubbles shall be avoided;b) the sealant shall be pressed to the contact surfaces of the substrates;c) the sealant surface sh

36、all be trimmed so that it is flush with the faces of the substrates and the spacers.The specimens shall be set on the edge of one of the substrates. The anti-adherent substrate shall be removed assoon as possible. The specimens shall rest in this position to allow curing or optimum drying of the sea

37、lant.The spacers shall be maintained in place during conditioning.Dimensions in millimetresKey1 Anodized aluminium or glass substrates2 Sealant3SpacerFigure 2 Test specimen with anodized aluminium or glass substratesEN ISO 9046:200447 Conditioning of test specimens7.1 PreconditioningAfter preparatio

38、n, the test specimens shall be preconditioned for 28 days at and relativehumidity.7.2 Specific conditioningAfter preconditioning according to 7.1, all test specimens shall be conditioned for 14 days in the oven (5.4) atplus one day at and relative humidity.8 ProcedureFollowing the conditioning accor

39、ding to clause 7, the spacers shall be removed and the test specimens shall besubjected to extension/compression cycles by use of the test machine (5.6) at a test temperature of .The number of cycles shall be 100, carried out at a speed of .The extension/compression amplitude shall be or , or any am

40、plitude agreed by the partiesconcerned.Table 1 gives the correspondence between the percent of elongation and the final width after extension for a testspecimen of initial width .After the test specimens have been submitted to cycling, they shall be allowed to relax for one hour, before beingexamine

41、d for loss of adhesion or cohesion. The depth of adhesive or cohesive failures shall be measured using asuitable measuring device capable of reading to .9 Test reportThe test report shall contain the following information:a) name of laboratory and date of test;b) a reference to this International St

42、andard;c) name, type (chemical family) and colour of sealant;d) batch of sealant from which the test specimens were produced;e) the substrates used (see 5.1);f) the primer(s) used, if applicable;g) the amplitude of the extension/compression cycling (see clause 8);h) the depth and location of the los

43、s of adhesion and/or cohesion for each test specimen;i) any deviation from this International Standard.Table 1 Correspondence of amplitude and width valuesAmplitude Width after extension Width after compressionaa13,5 10,512,9 11,1aInitial width .(232)C (505) %(702)C (232)C (505) %(232)C1 mm/min12,5

44、% 7,5 %12 mm%mmm 12,5 7,512 mm0,5 mmEN ISO 9046:2004blankBS EN ISO 9046:2004BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international

45、level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be g

46、rateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual

47、updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email:

48、 ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provide

49、s a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on th