BS EN ISO 9864-2005 Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products《土工合成织物 土工织物和相关产品每单位面积质量测定的试验方法》.pdf

1、BRITISH STANDARD BS EN ISO 9864:2005 Geosynthetics Test method for the determination of mass per unit area of geotextiles and geotextile-related products The European Standard EN ISO 9864:2005 has the status of a British Standard ICS 59.080.70 BS EN ISO 9864:2005 This British Standard was published

2、under the authority of the Standards Policy and Strategy Committee on 9 March 2005 BSI 9 March 2005 ISBN 0 580 45587 4 National foreword This British Standard is the official English language version of EN ISO 9864:2005. It is identical with ISO 9864:2005. It supersedes BS EN 965:1995 which is withd

3、rawn. The UK participation in its preparation was entrusted to Technical Committee B/553, Geosynthetics, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement internat

4、ional or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport

5、 to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee a

6、ny enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 5 and a

7、 back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM ENISO9864 February2005 ICS59.080.70 Englishversion GeosyntheticsTestmethodforthedeter

8、minationofmassper unitareaofgeotextilesandgeotextilerelatedproducts(ISO 9864:2005) GosynthtiquesMthodedessaipourladtermination delamassesurfaciquedesgotextilesetproduits apparents(ISO9864:2005) GeokunststoffePrfverfahrenzurBestimmungder flchenbezogenenMassevonGeotextilienund geotextilverwandtenProdu

9、kten(ISO9864:2005) ThisEuropeanStandardwasapprovedbyCENon15November2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchn

10、ational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamest

11、atusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,Switzerlandand

12、UnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2005CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.ENISO9864:2005:EEN ISO 9864:2005 (E) 2 Conten

13、ts page Foreword3 1 Scope 4 2 Normative references 4 3 Principle4 4 Procedure .4 4.1 Specimens4 4.2 Weighing.4 5 Expression of results 5 6 Test report 5 EN ISO 9864:2005(E) 3 Foreword This document (EN ISO 9864:2005) has been prepared by Technical Committee CEN/TC 189 “Geosynthetics“, the secretaria

14、t of which is held by IBN in collaboration with Technical Committee ISO/TC 221 “ Geosynthetics“. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2005, and conflicting national standards sha

15、ll be withdrawn at the latest by August 2005. This document supersedes EN 965:1995 According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Esto

16、nia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN ISO 9864:2005 (E) 4 1 Scope This document specifies a method for the determinati

17、on of mass per unit area of geotextiles and geotextile-related products for identification purposes and for use in technical data sheets. The method is applicable to all geotextiles and geotextile-related products. 2 Normative references The following referenced documents are indispensable for the a

18、pplication of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 554 Standard atmospheres for conditioning and/or testing Specifications. EN ISO 9862, Geosynthetics Samplin

19、g and preparation of test specimens (ISO 9862:2005). 3 Principle The mass per unit area is calculated by weighing square or circular specimens of known dimensions cut from positions distributed over the full width and length of the sample. 4 Procedure 4.1 Specimens Cut no less than ten specimens in

20、accordance with EN ISO 9862 to a nominal size of 100 cm, using a die. Cut the specimens in such a way that they are representative of the material to be tested. Measure the specimens to an accuracy of 0,5 %. If the structure of the product is such that a 100 cm specimen is not representative, it may

21、 be necessary to use a larger specimen size in order to achieve the necessary accuracy of measurement. Geotextile-related products with relatively large mesh sizes such as geogrids or geonets shall be cut half way between two links of the constituent elements. A specimen shall include at least 5 con

22、stituent elements in both directions. The area of the specimen shall be individually determined for each specimen. Condition the specimens in accordance with ISO 554 for a period of 24 h unless it can be shown that the results are not affected by omitting this procedure. 4.2 Weighing Weigh each spec

23、imen to an accuracy of 10 mg. EN ISO 9864:2005(E) 5 5 Expression of results Calculate the mass per unit area Aof each specimen, expressed in grams per square metre, using the equation A m 000 10 A = where: m is the mass of the specimen, in g; A is the area of the specimen, in cm 2 . Calculate the me

24、an mass per unit area, rounding the result to the nearest gram per square metre, and the coefficient of variation. 6 Test report The test report shall include the following particulars: a) statement that the test was performed in accordance with this document; b) number of specimens tested; c) condi

25、tioning atmosphere used; d) in case of a specimen size larger than 100 cm 2 , the size used, and a description (words, sketch or photograph) of the structure; e) mean value of mass per unit area, in grams per square metre; f) coefficient of variation; g) details of any deviation from the specified t

26、est procedure; h) date of the test. BS EN ISO 9864:2005 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is in

27、corporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if a

28、nyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating se

29、rvice called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbs

30、i-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wi

31、de range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)2

32、0 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002

33、. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publication

34、s. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photoco

35、pying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.