BS EN ISO IEC 80079-34-2011 Explosive atmospheres Application of quality systems for equipment manufacture《爆炸性环境 设备制造质量系统的应用》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO/IEC 80079-34:2011Explosive atmospheresPart 34: Application of quality systemsfor equipment manufacture (ISO/IEC80079-34:2011, modified)BS EN ISO/IEC 80079-34:2011 BRITI

2、SH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO/IEC 80079-34:2011. It supersedes BS EN 13980:2002 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EXL/23, Explosion and fire precautions in industrial and chemical pla

3、nt.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 70754 4 ICS 03.120.10; 13.230; 29.2

4、60.20 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2011.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDA

5、RD EN ISO/IEC 80079-34 NORME EUROPENNE EUROPISCHE NORM July 2011 CEN Management Centre: CENELEC Central Secretariat:Avenue Marnix 17, B-1000 Brussels Avenue Marnix 17, B-1000 Brussels 2011 CEN/CENELEC All rights of exploitation in any form and by any means reserved worldwide for CEN national Members

6、 and for CENELEC Members. Ref. No. EN ISO/IEC 80079-34:2011 EICS 03.120.01; 29.260.20 Supersedes EN 13980:2002English version Explosive atmospheres - Part 34: Application of quality systems for equipment manufacture (ISO/IEC 80079-34:2011, modified) Atmosphres explosives - Partie 34: Application des

7、 systmes de qualit pour la fabrication dquipements (ISO/CEI 80079-34:2011, modifie) Explosionsgefhrdete Bereiche - Teil 34: Anwendung von Qualittsmanagementsystemen fr die Herstellung von Gerten (ISO/IEC 80079-34:2011, modifiziert) This European Standard was approved by CEN and CENELEC on 25 May 201

8、1. CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may b

9、e obtained on application to the CEN-CENELEC Management Centre or to any CEN and CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN and CENELEC member into its own l

10、anguage and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France

11、, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN ISO/IEC 80079-34:2011 2 Contents Foreword . 4 Annex ZA (normative) Normative references to

12、international publications and the corresponding European publications 6Annex ZB (informative) Information relevant to equipment and protective systems according to standards harmonized under Directive 94/9/EC . 7ZB.1 Introduction 7ZB.2 Non-electrical equipment (EN 13463-1) . 7ZB.2.1 General . 7ZB.2

13、.2 Non-metallic parts . 7ZB.2.3 Casing and external parts 8ZB.2.4 Earthing and equipotential bonding of conductive parts . 8ZB.2.5 Light transmitting parts 8ZB.2.6 Ingress protection (IP) 8ZB.2.7 Completed products . 8ZB.3 Protection by flow restricting enclosure fr“ (EN 13463-2) . 8ZB.4 Protection

14、by flameproof enclosure d“ (EN 13463-3) 8ZB.5 Protection by constructional safety c“ (EN 13463-5) . 9ZB.5.1 General . 9ZB.5.2 Metal-based material . 9ZB.5.3 Machining . 9ZB.5.4 Cemented joints and potted assemblies 9ZB.5.5 Assembling 9ZB.5.6 Routine tests 10ZB.5.7 Power transmission systems . 10ZB.6

15、 Protection by control of ignition sources b“ (EN 13463-6) 10ZB.6.1 General . 10ZB.6.2 Ignition protection system . 10ZB.6.3 Installation . 10ZB.6.4 Tests . 10ZB.7 Protection by pressurised enclosures p“ (EN 13463-7). 11ZB.8 Protection by liquid immersion k“ (EN 13463-8) 11ZB.8.1 General . 11ZB.8.2

16、Protective liquid 11ZB.8.3 Casing 11ZB.8.4 Measuring or indicating devices . 11ZB.9 Fans (EN 14986) . 11ZB.9.1 General . 11ZB.9.2 Material . 12ZB.9.3 Assembled equipment and protective systems . 12ZB.9.4 Routine tests 12ZB.10 Petrol dispensers (EN 13617-1) 12ZB.10.1 General . 12ZB.10.2 Electrical in

17、stallation 12ZB.10.3 Information for safe operation . 13ZB.10.4 Assembly groups 13ZB.10.5 Assembling 13ZB.10.6 Monitoring equipment. 13ZB.10.7 Electrostatic discharge capacity . 14ZB.10.8 Routine tests 14ZB.11 Electrostatic spraying equipment (EN 50050) 14ZB.11.1 General . 14ZB.11.2 Electrical assem

18、bly . 14ZB.11.3 Mechanical assembly 15ZB.11.4 Tests . 15ZB.12 Protective systems 16ZB.12.1 General . 16ZB.12.2 Explosion resistant equipment (EN 14460) 16BS EN ISO/IEC 80079-34:2011 3 EN ISO/IEC 80079-34:2011 ZB.12.3 Explosion venting devices (EN 14797) 16ZB.12.4 Explosion isolation systems (EN 1508

19、9) 17Annex ZY (informative) Significant changes between this European Standard and EN 13980:2002 18Annex ZZ (informative) Coverage of Essential Requirements of EC Directives . 21Bibliography 22BS EN ISO/IEC 80079-34:2011EN ISO/IEC 80079-34:2011 4 Foreword The text of ISO/IEC 80079-34:2011 has been p

20、repared by Technical Committee IEC TC 31 “Equipment for explosive atmospheres” of the International Electrotechnical Commission (IEC) and has been taken over as EN ISO/IEC 80079-34:2011 by Technical Committee CEN/TC 305 “Potentially explosive atmospheres Explosion prevention and protection” the secr

21、etariat of which is held by DIN. The enquiry took place at ISO/CEN level (31M/31/CDV, CEN Project = WI 00305114). However, the vote on 31M/45/FDIS took place at IEC/CLC level (agreement between ISO and IEC, see also D130/103), under the responsibility of the Technical Committee CENELEC TC 31 “Electr

22、ical apparatus for potentially explosive atmospheres”. The text of document 31M/45/FDIS, future edition 1 of ISO/IEC 80079-34:2010, prepared by Technical Committee IEC TC 31 “Equipment for explosive atmospheres”, was submitted to the IEC-CENELEC parallel vote. A draft amendment, prepared by the Tech

23、nical Committee CEN TC 305 “Electrical Potentially explosive atmospheres Explosion prevention and protection “, was submitted to the CENELEC formal vote. The combined texts were approved by CEN and CENELEC as EN ISO/IEC 80079-34 on 2011-05-25. This document supersedes EN 13980:2002. The significant

24、changes with respect to EN 13980:2002 are the following: references have been changed, especially references to CEN/CENELEC and their publications have been changed to references to international available publications; foreword and scope have been adapted to international requirements; terminology

25、has been changed and adapted to terminology being more customary in the international standardization (e. g. “notified body“ has been modified to “body responsible for verification“); information relevant to particular types of protection has been amended with Ex t - dust ignition protection by encl

26、osure, gas detectors and flame arresters; Annex B has been renamed as “Verification criteria for elements with non-measurable paths used as an integral part of a type of protection“; B.3 has been modified; information relevant to equipment and protective systems according to standards harmonized und

27、er Directive 94/9/EC are given in new Annex ZB. This standard should be read in conjunction with EN ISO 9001:2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any o

28、r all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an harmonized national standard or by endorsement (dop) 2012-05-25 latest date by which the national standards conflicting with the EN have to be withdrawn

29、(dow) 2014-05-25 BS EN ISO/IEC 80079-34:2011 5 EN ISO/IEC 80079-34:2011 Annex ZB provides information on those aspects that the quality system should address with respect to particular protection laid down in harmonized standards under Directive 94/9/EC, e.g. types of protection for non-electrical e

30、quipment or components, equipment according to specific product standards and autonomous protective systems. It does not add to or otherwise change the requirements of this standard. This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European

31、 Free Trade Association and covers essential requirements of EC Directive 94/9/EC. See Annex ZZ. The State of the Art is included in Annex ZY “Significant changes between this European Standard and EN 13980:2002“. Annexes ZA, ZB, ZY and ZZ have been added by CEN and CENELEC. _ BS EN ISO/IEC 80079-34

32、:2011EN ISO/IEC 80079-34:2011 6 Annex ZA (normative) Normative references to international publications and the corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For und

33、ated references, the latest edition of the referenced document (including any amendments) applies. NOTE Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60050-426 - International Electr

34、otechnical Vocabulary - Part 426: Equipment for explosive atmospheres - - IEC 60079-0 - Explosive atmospheres - Part 0: Equipment - General requirements EN 60079-0 - ISO/IEC 17050-1 - Conformity assessment - Suppliers declaration of conformity - Part 1: General requirements EN ISO/IEC 17050-1 - ISO

35、9000 2005 Quality management systems - Fundamentals and vocabulary EN ISO 9000 2005ISO 9001 2008 Quality management systems - Requirements EN ISO 9001 2008BS EN ISO/IEC 80079-34:2011 7 EN ISO/IEC 80079-34:2011 Annex ZB (informative) Information relevant to equipment and protective systems according

36、to standards harmonized under Directive 94/9/EC ZB.1 Introduction This annex provides information on those aspects that the quality system should address with respect to particular protection laid down in harmonized standards under Directive 94/9/EC, e.g. types of protection for non-electrical equip

37、ment or components, equipment according to specific product standards and autonomous protective systems. It does not add to or otherwise change the requirements of this standard. This annex provides information how to meet the requirements of this standard, recognizing that other methods achieving t

38、he same objectives are equally acceptable; it also draws attention to aspects of requirements that may not be readily apparent to those unfamiliar with quality systems for products intended for use in potentially explosive atmospheres. The examples can be used by manufacturers to check whether the s

39、afety-relevant aspects are considered in the quality system and covered by adequate procedures (see 7.1). They can also be used for internal or external quality audits (see 8.2). NOTE The following examples do not cover all protection concepts but give some advice and will be supplemented to in the

40、next edition. ZB.2 Non-electrical equipment (EN 13463-1) ZB.2.1 General The following safety aspects as specified in the technical file should be realised by systematic production techniques and/or verifications and tests on the basis of written procedures. For dust ignition, protection the safety a

41、spects laid down in A.10 may also apply. ZB.2.2 Non-metallic parts Material characteristics; finish; surface resistance; surface area of non-conductive parts; limitation of thickness; measures for charge bonding (earthed frames). BS EN ISO/IEC 80079-34:2011EN ISO/IEC 80079-34:2011 8 ZB.2.3 Casing an

42、d external parts Material of the casing and content of light metals; protection of removable parts against unintentional or inadvertent removal; materials used for cementing. ZB.2.4 Earthing and equipotential bonding of conductive parts Earthing terminal; effective connection of conductive parts; vo

43、ltage equalising cables. ZB.2.5 Light transmitting parts Material; integrity; guards and protective covers. ZB.2.6 Ingress protection (IP) Weld continuity; fitting of gaskets and seals; continuity of moulded grooves and tongues; application of cements. ZB.2.7 Completed products Instructions are deli

44、vered with the equipment; instructions include information regarding embedded equipment and components; intended marking is fixed; intended warning labels are fixed; after final testing, products are protected against foreseeable injuries during storage and transport. ZB.3 Protection by flow restric

45、ting enclosure fr“ (EN 13463-2) Safety aspects are covered by the general clause for non-electrical equipment (EN 13463-1). ZB.4 Protection by flameproof enclosure d“ (EN 13463-3) The same safety aspects as for electrical equipment apply (see A.3; for aspects of dust ignition protection, see also A.

46、10). BS EN ISO/IEC 80079-34:2011 9 EN ISO/IEC 80079-34:2011 ZB.5 Protection by constructional safety c“ (EN 13463-5) ZB.5.1 General In addition to the safety aspects for non-electrical equipment in ZB.2, the following safety aspects are relevant. ZB.5.2 Metal-based material Material name complying w

47、ith the requirement; material properties (composition with regard to corrosion, thermal conduction and mechanical sparks, mass fraction of aluminium, titanium, magnesium, zirconium, flammability); cracks, inclusions, blow holes and porosity (either by a visual test or by another suitable test method

48、 depending on exposure); heat treatment (e.g. hardening, tempering); dimensional accuracy including all parts without machining. ZB.5.3 Machining Compliance with tolerances for shape, position, concentricity, quality of finish; dimensional accuracy of functional surfaces (e.g. tolerances for diameters, especially for indicator units preadjustment and correct polarity); depth and configuration of cut-in to ensure the constructionally intended stress concentration. ZB.5.4 Cemented joints and potted assemblies She