BS EN ISP 11182-1-1995 Information technology - International standardized profile FOD36 - Open document format Extended document structure - Character raster graphics and geometri.pdf

1、BRITISH STANDARD BS EN ISP 11182-1:1995 Implementation of EN ISP11182-1:1994 Information technology International Standardized Profile FOD36 OpenDocument Format: Extended document structure Character,raster graphics and geometric graphics content architectures Part 1: Document Application Profile (D

2、AP) (Regionalvariantof ISO/IECISP11182-1:1993 The European Standard EN ISP11182-1:1994 has the status of a BritishStandard UDC 681.3:621.39:651.51.7BSENISP11182-1:1995 This BritishStandard, having been prepared under the directionof the Information Systems Technology Assembly, was published under th

3、e authorityof the Standards Boardand comes into effect on 15July1995 BSI03-2000 The following BSI references relate to the work on this standard: Committee reference IST/18 Draft for comment91/68284 DC ISBN 0 580 24055 X Committees responsible for this British Standard The preparation of this Britis

4、hStandard was entrusted to Technical Committee IST/18, Document processing and related communication, upon which the following bodies were represented: British Computer Society British Telecommunications plc Digital Equipment Co. Ltd. HM Treasury (Central Computer and Telecommunications Agency) IBM

5、United Kingdom Ltd. International Computers Limited Joint Information Systems Committee of the Higher Education Funding Council Kodak Limited Level7 Ltd. National Computing Centre Ltd. National Health Services Rank Xerox Ltd. SEMA Group Systems Ltd. Amendments issued since publication Amd. No. Date

6、CommentsBSENISP11182-1:1995 BSI 03-2000 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 Foreword xiii Text of ISO/IEC ISP11182-1 1BSENISP11182-1:1995 ii BSI 03-2000 National foreword This BritishStandard reproduces verbatim EN ISP11182-1:1994 and implements

7、it as the UK national standard. This BritishStandard supersedes DD ENV41510:1991 which is withdrawn. This BritishStandard is published under the direction of the Information Systems Technology Assembly, whose Technical Committee IST/18 has the responsibility to: aid enquirers to understand the text;

8、 present to the responsible European committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. NOTEInternational and European Standards, as well as overseas standards, are

9、 available from Customer Services, BSI,389 Chiswick High Road, London W44AL. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself conf

10、er immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, theEN ISP title page, page2, the ISO/IEC ISP title page, pagesii toxiv, pages1to205 and a back cover. This standard has been updated (see copyright date) and may have had

11、amendments incorporated. This will be indicated in the amendment table on the inside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISP11182-1 November1994 ICS 35.100 Descriptors: Data processing, text processing, information interchange, documentation, documents, logical structure

12、, layout, formats, profiles. English version Information technology International Standardized Profile FOD36 Open Document Format: Extended document structure Character, raster graphics and geometric graphics content architectures Part1:DocumentApplication Profile (DAP) (Regional variant of ISO/IEC

13、ISP11182-1:1993) Technologies de linformation Profil normalis international FOD36 Format de document ouvert: Structure de document avanc Architectures du contenu des caractres, des graphiques raster et des graphiques gomtriques Partie1: Profil du document dapplication (DAP) (Variante rgionale de lIS

14、O/IEC ISP11182-1:1993) Informationstechnik Internationale Profilnorm FOD36 Format fr Brodokumente Komplexe Dokumentstruktur Inhaltsarchitekturen fr Schriftzeichen, Rasterbilder und Geometriegrafiken Teil1: Dokumentanwendungsprofil (DAP) (regionale Version von ISO/IEC ISP11182-1:1993) This European S

15、tandard was approved by CEN on1994-12-05. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning su

16、ch national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language

17、 and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and Unit

18、ed Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1994 Copyright reserved to CEN members Ref. No. EN ISP11182-1:1994 EENISP11182-1:1994 BSI 03-2000 2 Foreword The Technical Boa

19、rd decided to submit the International Standard Information Technology International Standardized Profile FOD36 Open Document Format: Extended document structure Character, raster graphics and geometric graphics content architectures Part1: Document Application profile (DAP) (Regional variant of ISO

20、/IEC ISP11182-1:1993) for adoption by the Unique Acceptance Procedure (UAP), in accordance with clause4.6 of the CEN/CENELEC Internal Regulations Part2 of April1990. The result of the Unique Acceptance Procedure was positive. For the time being this standard exists in the English version only. This

21、document is the first part of a multi-part Functional Standard identified in M-IT-02 as F/OD36 Extended Document Format Character, raster graphics and geometric graphics content architectures. M-IT-02, CEN/CENELEC/ETSI Memorandum on taxonomy of profiles and directory of functional standards. This Eu

22、ropean Standard supersedes ENV41510:1990 which shall be withdrawn. This European Standard shall be given the status of a National Standard, either by publication of an identical text or by endorsement, at the latest by June1995, and conflicting national standards shall be withdrawn at the latest by

23、June1995. According to the CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United K

24、ingdom. Endorsement notice The text of the International Standard ISO/IEC ISP11182-1:1993 was approved by CEN as a European Standard with agreed regional variations as given below. Section and line numbers correspond to the equivalent numbers in the International Standard. 1 Scope Replace the last t

25、wo paragraphs by: “A document structured in accordance with this International Standard Profile is represented for interchange by a document application profile which uses the Open Document Interchange Format (ODIF) as defined in CCITT Rec. T.415/ISO8613-5.” 5.1 Data stream conformance Replace5.1, f

26、irst bullet with: “the data stream shall be encoded in accordance with the ASN.1 encoding rules defined in CCITTRec. X.209/ISO/IEC8825 5.2 Implementation conformance Replace5.2, first paragraph, first sentence with: “A conforming receiving implementation shall be capable of receiving any data stream

27、s conforming to this International Standardized Profile structured in accordance with ODIF.” 8 Interchange format Replace8, first paragraph with: “For conformance to this International Standardized Profile, the interchange format classA shall be used.” 8.2 Interchange format SDIF 8.2 and its sub-cla

28、uses do not apply.ISO/IECISP11182-1:1993(E) ii BSI 03-2000 Contents Page Foreword xiii Introduction 1 1 Scope 1 2 Normative references 2 2.1 Paired Recommendations|International Standards equivalent in technical content 2 2.2 Additional references 3 3 Definitions 4 4 Relationship with other Internat

29、ional Standardized Profiles 4 5 Conformance 4 5.1 Data stream conformance 4 5.2 Implementation conformance 5 6 Characteristics supported by this document application profile 5 6.1 Overview 5 6.1.1 General 5 6.1.2 Formatted form documents 5 6.1.3 Processable form documents 6 6.1.4 Formatted processab

30、le form documents 6 6.1.5 Generic documents 6 6.1.6 Document profile 7 6.2 Logical characteristics 7 6.2.1 Introduction 7 6.2.2 Overview of the logical structure 7 6.2.3 Body part of the logical structure 7 6.2.3.1 DocumentLogicalRoot 7 6.2.3.2 Passage 7 6.2.3.3 NumberedSegment 8 6.2.3.4 Number 9 6.

31、2.3.5 Paragraph 9 6.2.3.6 BodyText, BodyRaster and BodyGeometric 9 6.2.3.7 Footnote 10 6.2.3.8 FootnoteReference 10 6.2.3.9 FootnoteBody 11 6.2.3.10 FootnoteNumber 11 6.2.3.11 FootnoteText 11 6.2.3.12 Title 11 6.2.3.13 Phrase 12 6.2.3.14 Constituents that provide for a general referencing mechanism

32、12 6.2.3.14.1 Reference 12 6.2.3.14.2 ReferencedContent 13 6.2.3.15 Constituents representing illustrations 13 6.2.3.15.1 Introduction 13 6.2.3.15.2 Figure 13 6.2.3.15.3 Artwork 14 6.2.3.15.4 Form 14 6.2.3.15.5 Caption 14 6.2.3.15.6 Description 14 6.2.3.15.7 EntryGroup 15 6.2.3.16 Constituents used

33、to represent tables 15 6.2.3.16.1 Introduction 15ISO/IECISP11182-1:1993(E) BSI 03-2000 iii Page 6.2.3.16.2 Table 15 6.2.3.16.3 Row 15 6.2.3.16.4 TableComponent 15 6.2.3.16.5 RowComponent 16 6.2.3.16.6 EntryElement 16 6.2.3.16.7 EntryText, EntryRaster and EntryGeometric 16 6.2.3.17 Constituents repre

34、senting lists 16 6.2.3.17.1 Introduction 16 6.2.3.17.2 NumberedList 16 6.2.3.17.3 UnNumberedList 17 6.2.3.17.4 DefinitionList 17 6.2.3.17.5 ListItem 17 6.2.3.17.6 ListTerm 17 6.2.4 Common content part of the logical structure 17 6.2.4.1 CommonContent 17 6.2.4.2 CommonText 18 6.2.4.3 PageNumber 18 6.

35、2.4.4 CommonRaster 18 6.2.4.5 CommonGeometric 18 6.2.4.6 CommonReference 18 6.2.4.7 CurrentInstance 18 6.2.4.8 TableNumber 19 6.2.4.9 CommonNumber 19 6.3 Layout characteristics 19 6.3.1 Overview of the layout characteristics 19 6.3.2 DocumentLayoutRoot 20 6.3.3 PageSet 20 6.3.4 Page characteristics

36、20 6.3.4.1 Page constituents 20 6.3.4.2 Page dimensions 20 6.3.4.3 Nominal page sizes 21 6.3.4.4 Page offset 21 6.3.4.5 Page layout characteristics 21 6.3.4.5.1 General characteristics 21 6.3.4.5.2 Body area layout 21 6.3.4.5.3 Header/footer area layout 22 6.3.4.5.4 Page layout 22 6.3.5 Body area ch

37、aracteristics 24 6.3.5.1 General characteristics 24 6.3.5.2 BasicBody 24 6.3.5.3 VariableCompositeBody 24 6.3.5.4 BasicFloat 25 6.3.5.5 SnakingColumns 29 6.3.5.6 SynchronizedColumns 30 6.3.5.7 ColumnVariable 31 6.3.5.8 ColumnFixed 31 6.3.5.9 FootnoteArea 32 6.3.5.10 FixedCompositeBody 32ISO/IECISP11

38、182-1:1993(E) iv BSI 03-2000 Page 6.3.5.11 CompositeFloat 33 6.3.5.12 CompositeFixtureVariable 33 6.3.5.13 CompositeFixtureFixed 34 6.3.5.14 CompositeArtwork 34 6.3.5.15 BasicFixture 34 6.3.5.16 FormArea 35 6.3.5.17 EntryGroupArea 36 6.3.5.18 FormEntryArea 36 6.3.5.19 BasicColumn 36 6.3.5.20 Composi

39、teColumnVariable 37 6.3.5.21 CompositeColumnFixed 37 6.3.5.22 CompositeCommon 37 6.3.5.23 Constituents used for laying out tables 38 6.3.5.23.1 Overview 38 6.3.5.23.2 TableArea 40 6.3.5.23.3 TableHeader 40 6.3.5.23.4 TableLabel 41 6.3.5.23.5 CompositeTableLabel 41 6.3.5.23.6 LabelComponent 41 6.3.5.

40、23.7 TableLabelContent 42 6.3.5.23.8 RowArea 42 6.3.5.23.9 SubRowGroup 42 6.3.5.23.10 SubRow 42 6.3.5.23.11 Cell 42 6.3.6 Header and footer area characteristics 43 6.3.6.1 General characteristics 43 6.3.6.2 BasicHeader and BasicFooter 43 6.3.6.3 CompositeHeader and CompositeFooter 43 6.3.6.4 Sourced

41、ContentVariable 43 6.3.6.5 ArrangedContentVariable 44 6.3.6.6 SourcedContentFixed 44 6.3.6.7 ArrangedContentFixed 45 6.3.7 GenericBlock and SpecificBlock 45 6.4 Document layout characteristics 45 6.4.1 Flow controls 45 6.4.1.1 Allocation of content to page sets 45 6.4.1.2 Page breaks 46 6.4.1.3 Allo

42、cation of content to body areas 46 6.4.1.3.1 General mechanism for laying out content in a composite body area 46 6.4.1.3.2 Layout into BasicFloat and BasicFixture frames 47 6.4.1.3.3 Layout in SnakingColumns frames 47 6.4.1.3.4 Layout in SynchronizedColumns frames 48 6.4.1.3.5 Layout in CompositeFl

43、oat frames 48 6.4.1.3.6 Layout of figures 48 6.4.1.3.7 Layout of tables 49 6.4.1.3.8 Layout of forms 50 6.4.1.3.9 Layout of footnotes 50 6.4.1.4 Allocation of content to header and footer areas 51ISO/IECISP11182-1:1993(E) BSI 03-2000 v Page 6.4.2 Layout of document content 51 6.4.2.1 Margins 51 6.4.

44、2.2 Separation 51 6.4.2.3 Indivisibility 51 6.4.2.4 Same layout object 52 6.4.2.5 Concatenation 52 6.4.2.6 Block alignment 52 6.4.3 Layout controls applicable in the absence of a generic layout structure 53 6.5 Content layout and imaging characteristics 53 6.5.1 Character content 53 6.5.1.1 Introduc

45、tion 53 6.5.1.2 Character content architecture class 54 6.5.1.3 Character repertoires 54 6.5.1.4 Code extension techniques 55 6.5.1.5 Line spacing 57 6.5.1.6 Character spacing 57 6.5.1.7 Character path and line progression 57 6.5.1.8 Character positioning controls 58 6.5.1.9 Character orientation 58

46、 6.5.1.10 Emphasis 58 6.5.1.11 Tabulation 59 6.5.1.12 Indentation 59 6.5.1.13 Alignment 59 6.5.1.14 First line format 60 6.5.1.15 Widow and orphan sizes 60 6.5.1.16 Fonts 60 6.5.1.17 Reverse character strings 61 6.5.1.18 Kerning offset 61 6.5.1.19 Proportional line spacing 61 6.5.1.20 Superscripts a

47、nd subscripts 61 6.5.1.21 Line breaks 61 6.5.1.22 Substitution of characters 61 6.5.1.23 Initial point 61 6.5.1.24 Use of control functions 61 6.5.1.25 Formatting the content 62 6.5.1.26 Graphic character composition 62 6.5.1.27 Parallel text 62 6.5.1.28 Pairwise kerning 62 6.5.2 Raster graphics con

48、tent 63 6.5.2.1 Introduction 63 6.5.2.2 Raster graphics content architecture 63 6.5.2.3 Raster graphics encoding methods 63 6.5.2.4 Pel path and line progression 63 6.5.2.5 Clipping 64 6.5.2.6 Pel spacing 64 6.5.2.7 Spacing ratio 64 6.5.2.8 Image dimensions 64ISO/IECISP11182-1:1993(E) vi BSI 03-2000

49、 Page 6.5.3 Geometric graphics content 64 6.6 Miscellaneous features 64 6.6.1 Resource-documents 64 6.6.2 External-documents 65 6.6.3 Border 65 6.6.4 Application comments 65 6.6.5 Alternative representation 65 6.6.6 Automatic numbering and referencing mechanisms 67 6.6.6.1 Introduction 67 6.6.6.2 Bindings 67 6.6.6.2.1 Binding “prefixes-” 68 6.6.6.2.2 Binding “suffixes-” 68 6.6.6.2.3 Binding “numberstring-” 68 6.6.6.2.4 Binding “numbers-” 68 6.6.6.2.5 Binding “separator-” 68 6.6.6.2.6 Binding “string-” 68 6.6.6.2.7 Binding “PGn