1、BRITISH STANDARD AEROSPACE SERIES BS HC 205:1974 Incorporating Amendment No. 1 Specification for Precipitation hardening nickel base chromium-cobalt- molybdenum-titanium alloy castings (Cr 20, Co 20, Mo 6, Ti 2) UDC 629.7:669.245262528295 14:669.245.018.298BSHC205:1974 This British Standard having b
2、eenapproved by the AerospaceIndustry Standards Committee, was published underthe authority of the Executive Board on 10 May 1974 BSI 01-2000 The following BSI references relate to the work on this standard: Committee reference ACE/60 Draft for comment 72/35126 DC ISBN 0 580 08333 0 A British Standar
3、d does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an
4、 inside front cover, pages i and ii, page 1 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date of issue Comments 384
5、2 May 1982 Indicated by a sideline in the marginBSHC205:1974 BSI 01-2000 i Contents Page 1 Inspection and testing procedure 1 2 Chemical composition 1 3 Condition 1 4 Heat treatment 1 5 Mechanical properties 1 6 Rectification of defects 1ii blankBSHC205:1974 BSI 01-2000 1 1 Inspection and testing pr
6、ocedure This British Standard shall be used in conjunction with the relevant sections of the latest issue of BSHC 100 as follows: 2 Chemical composition The re-melting stock and castings shall contain: 3 Condition Castings shall be supplied solution treated in accordance with 4.1. 4 Heat treatment T
7、he final heat treatment shall be as follows. 4.1 Solution treatment. Heat uniformly at a temperature of 1 150 10 C for 2 h in a protective atmosphere and cool to room temperature. 4.2 Precipitation treatment. Heat uniformly at a temperature of 800 10 C for 8 h and cool in air to room temperature. 5
8、Mechanical properties 5.1 Tensile. The room temperature tensile properties obtained from test pieces representing castings, selected, prepared and tested in accordance with the relevant requirements of BSHC 100, shall be: 6 Rectification of defects 6.1 Correction of distortion. When permitted in acc
9、ordance with BS HC 100, distortion shall be corrected after solution treatment. 6.2 Repair of castings by welding. When repair by welding is permitted in accordance with BSHC100, castings shall subsequently be solution treated. Re-melting stock Sections 1 and 2 Precision castings Sections 1 and 3 Ce
10、ntrifugal castings Sections 1 and 5 Element % min. max. Carbon 0.04 0.08 Silicon 0.4 Manganese 0.6 Sulphur 0.007 Silver 0.0005 (5 p.p.m.) Aluminium 0.3 0.6 Cobalt 19.5 21.0 Chromium 19.5 21.0 Copper 0.2 Iron 0.7 Molybdenum 5.6 6.1 Lead 0.0020 (20 p.p.m.) Titanium 2.0 2.4 Aluminium + Titanium 2.4 2.8
11、 Nickel Remainder NOTEAttention is drawn to the fact that this alloy composition is the subject of a patent. Re-melting stock can only be manufactured under licence. 0.2% proof stress Tensile strength Elongation min. min. min. MPa (N/mm 2 ) MPa (N/mm 2 ) % 430 620 12 NOTEInformation on SI units is g
12、iven in BS 3763, “The International System of units (SI)”, and BS 350, “Conversion factors and tables”.BS HC 205:1974 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on st
13、andards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality
14、 of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI off
15、ers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:020899670
16、01. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standa
17、rds through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date wi
18、th standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK,
19、of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior
20、written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1