BS IEC 61084-2-2-2017 Cable trunking systems and cable ducting systems for electrical installations Particular requirements Cable trunking systems and cable ducting systems intende电.pdf

1、Cable trunking systems and cable ducting systems for electrical installationsPart 2-2: Particular requirements Cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloorBS IEC 61084-2-2:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd

2、1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of IEC 61084-2-2:2017. The UK participation in its preparation was entrusted to TechnicalCommittee PEL/213, Cable management.A list of organizations represented on this committee can be obtained onrequest to its secret

3、ary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 89534 0ICS 29.060.01; 29.120.10Compliance with a British Standar

4、d cannot confer immunity fromlegal obligations.This Published Document was published under the authority of theStandards Policy and Strategy Committee on 30 April 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS IEC 61084-2-2:2017 2 IEC 61084-2-2:2017 IEC 2017

5、CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms and definitions 5 4 General requirements 6 5 General conditions for tests . 7 6 Classification . 7 7 Marking and documentation . 7 8 Dimensions 8 9 Construction 8 10 Mechanical properties 9 11 Electrical properties . 14 12 Thermal prop

6、erties 14 13 Fire hazard 14 14 External influences 14 15 Electromagnetic compatibility 15 Annex A (informative) Types of cable trunking systems (CTS) and cable ducting systems (CDS) 27 Annex B (normative) CTS/CDS IK code . 28 Annex AA (normative) Mechanical load tests . 29 Bibliography 31 Figure 101

7、 Types and application of CTS/CDS for underfloor, flushfloor or onfloor installations 16 Figure 102 Examples of trunking and ducting installations . 17 Figure 103 Example of underfloor embedded CDS according to 3.101 . 18 Figure 104 Example of flushfloor CTS according to 3.102 19 Figure 105 Example

8、of onfloor CTS according to 3.103 20 Figure 106 Principles for arrangement . 21 Figure 107 Examples for arrangement . 22 Figure 108 Load test set-up for CTS/CDS in accordance with 10.5.103 24 Figure 109 Load test set-up for CTS/CDS in accordance with 10.5.104 26 Table A.2 Types of CTS and CDS for fl

9、oor installation . 27 Table AA.1 Mechanical load tests 29 BS IEC 61084-2-2:2017IEC 61084-2-2:2017 IEC 2017 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS Part 2-2: Particular requirements Cable trunking systems and cable du

10、cting systems intended for mounting underfloor, flushfloor, or onfloor FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote intern

11、ational co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter

12、 referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participa

13、te in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an int

14、ernational consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reas

15、onable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IE

16、C Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of confo

17、rmity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publicat

18、ion. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or

19、for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct

20、 application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61084-2-2 has been prepared by

21、 subcommittee 23A: Cable management systems, of IEC technical committee 23: Electrical accessories. This second edition cancels and replaces the first edition published in 2003. This edition constitutes a technical revision. This edition includes the following significant technical changes with resp

22、ect to the previous edition: classification; construction; mechanical and electrical properties. This International standard is to be used in conjunction with IEC 61084-1:2017. BS IEC 61084-2-2:2017 4 IEC 61084-2-2:2017 IEC 2017 The text of this standard is based on the following documents: FDIS Rep

23、ort on voting 23A/828/FDIS 23A/836/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This part of the IEC 61084 series supplement

24、s or modifies the corresponding clauses of IEC 61084-1:2017 as follows: where no particular clause or subclause of IEC 61084-1 is mentioned, the corresponding clause or subclause of IEC 61084-1 applies as far as it is reasonable; where “addition” or “replacement” is stated, the relevant text of IEC

25、61084-1 is to be adapted accordingly; subclauses, figures and tables which are additional to those in IEC 61084-1 are numbered starting from 101. In this standard, the following print types are used: requirements and definitions: roman type; compliance statements: italic type. A list of all parts in

26、 the IEC 61084 series, published under the general title Cable trunking and cable ducting systems for electrical installations, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website

27、 under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are

28、 considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. BS IEC 61084-2-2:2017IEC 61084-2-2:2017 IEC 2017 5 CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS Part 2-2: Particular requirement

29、s Cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor 1 Scope This part of the IEC 61084 series specifies requirements and tests for cable trunking systems (CTS) and cable ducting systems (CDS) intended for the accommodation, and where necessary

30、for the electrically protective separation, of insulated conductors, cables and possibly other electrical equipment in electrical and/or communication systems installations. The maximum voltage of these installations is 1 000 V AC and 1 500 V DC. These systems are intended for mounting underfloor, f

31、lushfloor or onfloor. This document does not apply to CTS/CDS which are intended to be fixed to the wall and supported by the floor. This document does not apply to conduit systems, cable tray systems, cable ladder systems, power track systems or equipment covered by other standards. 2 Normative ref

32、erences This clause of Part 1 is applicable, except as follows: Addition: IEC 60068-2-60:2015, Environmental testing Part 2-60: Tests Test Ke: Flowing mixed gas corrosion test IEC 60068-2-75:2014, Environmental testing Part 2-75: Tests Test Eh: Hammer tests IEC 61084-1:2017, Cable trunking systems a

33、nd cable ducting systems for electrical installations Part 1: General requirements 3 Terms and definitions This clause of Part 1 is applicable, except as follows: 3.1 Replace Note 1 to entry by: Note 1 to entry: Different types of CTS are shown in Figure 101 and explained in Annex A. 3.2 Replace Not

34、e 1 to entry by: Note 1 to entry: Different types of CDS are shown in Figure 101 and explained in Annex A. BS IEC 61084-2-2:2017 6 IEC 61084-2-2:2017 IEC 2017 3.3 Addition: f) service unit Replace Note 1 to entry by: Note 1 to entry: A system does not necessarily include all system components a) to

35、f). Different combinations of system components can be used. Addition: 3.101 underfloor CTS/CDS CTS/CDS whose components, except access units and service units, are intended to be mounted within or under a floor and in normal use are not exposed to traffic loads Note 1 to entry: See Figures 102a), 1

36、02c) and 103. 3.102 flushfloor CTS/CDS CTS/CDS whose components, except access units and service units, are intended to be mounted flush such that the height above the upper level of the floor covering is not more than 4 mm Note 1 to entry: The upper surface is considered to be exposed to traffic lo

37、ads. Note 1 to entry: See Figures 102b) and 104. 3.103 onfloor CTS/CDS CTS/CDS whose components are intended to be mounted on a floor such that the height above the upper level of the floor covering is greater than 4 mm Note 1 to entry: The upper surface is considered to be exposed to traffic loads.

38、 Note 2 to entry: See Figures 102d) and 105. 3.104 access unit system component intended to provide access to insulated conductors or cables 3.105 service unit system component intended for incorporation of one or more apparatus either directly or by means of one or more apparatus mounting devices 3

39、.106 service unit service unit which has no cables connected to electrical equipment 3.107 service unit service unit which has cables connected to electrical equipment 4 General requirements This clause of Part 1 is applicable. BS IEC 61084-2-2:2017IEC 61084-2-2:2017 IEC 2017 7 5 General conditions

40、for tests This clause of Part 1 is applicable. 6 Classification This clause of Part 1 is applicable, except as follows: Additional subclauses: 6.101 According to floor treatment 6.101.1 CTS/CDS for dry-treatment of floor 6.101.2 CTS/CDS for wet-treatment of floor when the service unit is not in use

41、6.101.3 CTS/CDS for wet-treatment of floor when the service unit is in use 6.102 According to resistance to vertical load applied through small surface area 6.102.1 CTS/CDS for 500 N 6.102.2 CTS/CDS for 750 N 6.102.3 CTS/CDS for 1 000 N 6.102.4 CTS/CDS for 1 500 N 6.102.5 CTS/CDS for 2 000 N 6.102.6

42、 CTS/CDS for 2 500 N 6.102.7 CTS/CDS for 3 000 N 6.103 Optional classification according to resistance to vertical load applied through large surface area 6.103.1 CTS/CDS for 2 000 N 6.103.2 CTS/CDS for 3 000 N 6.103.3 CTS/CDS for 5 000 N 6.103.4 CTS/CDS for 10 000 N 6.103.5 CTS/CDS for 15 000 N 7 M

43、arking and documentation This clause of Part 1 is applicable, except as follows: Additional subclauses: 7.101 Access units and service units of systems classified according to 6.101.1 shall be marked that they are suitable for dry treatment of floor only. The marking shall be visible by the user whi

44、ch may be achieved by opening the cover. NOTE This marking can be in the form of text or graphic. BS IEC 61084-2-2:2017 8 IEC 61084-2-2:2017 IEC 2017 7.102 Service units shall be marked with a warning about the potential damage to electrical accessories by closing the cover. The marking shall be vis

45、ible by the user which may be achieved by opening the cover. NOTE This marking can be in the form of text or graphic. 7.103 Compliance with 7.101 and 7.102 is checked by inspection. 8 Dimensions This clause of Part 1 is applicable, except as follows: Addition: There are no dimensions requirements. 9

46、 Construction This clause of Part 1 is applicable, except as follows: Addition: 9.101 Access covers of underfloor, flushfloor and onfloor CTS/CDS, which in normal use are subjected to external mechanical loads, shall resist movement and unintentional opening. Compliance is checked by inspection and

47、by the tests of 10.5. 9.102 Service units installed flushfloor shall protect the installed electrical apparatus and the plug from direct impact when in use. This protection shall be effective and shall not cause damage to the outgoing cable. Compliance is checked by inspection and by the tests of 10

48、.3. 9.103 It shall be possible to securely fix: service units to the system; electrical apparatus to the service units. Compliance is checked by the tests of 10.3 and 10.5.1. 9.104 When the service unit is not in use, it shall be possible to close openings intended for the passage of cables. Opening

49、s, when in use, in underfloor and flushfloor CTS/CDS, for the passage of cables, need not be closed if one of its dimensions is less than 20 mm in one direction. Compliance is checked by inspection and measurement. 9.105 Underfloor and flushfloor CTS/CDS which in normal use are embedded in screed material shall be protected against ingress of the screed material. Openings leading to the interior of underfloor and flushfloor CTS/CDS which in normal use, are l