BS IEC 61988-4-1-2015 Plasma display panels Environmental testing methods Climatic and mechanical《等离子显示板 环境试验方法 气候和机械》.pdf

1、BSI Standards PublicationPlasma display panelsPart 4-1: Environmental testing methods Climatic and mechanicalBS IEC 61988-4-1:2015National forewordThis British Standard is the UK implementation of IEC 61988-4-1:2015.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/47,

2、Semiconductors.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2015.Published

3、by BSI Standards Limited 2015ISBN 978 0 580 83908 5ICS 31.260Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2015.Amendments/corrigenda issued since publi

4、cationDate Text affectedBRITISH STANDARDBS IEC 61988-4-1:2015IEC 61988-4-1 Edition 1.0 2015-03 INTERNATIONAL STANDARD Plasma display panels Part 4-1: Environmental testing methods Climatic and mechanical INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 31.260 ISBN 978-2-8322-2392-5 Registered trademark

5、 of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. colourinsideBS IEC 61988-4-1:2015 2 IEC 61988-4-1:2015 IEC 2015 CONTENTS FOREWORD . 5 1 Scope 7 2 Normative references. 7 3 Terms, definitions and letter symbols .

6、8 4 Environmental tests . 8 4.1 General . 8 4.2 Test items . 8 4.3 Structure of testing equipment . 8 5 Standard conditions . 8 5.1 Standard reference atmosphere . 8 5.2 Standard atmospheric conditions for reference measurements and tests 9 5.3 Standard atmospheric conditions for measurements and te

7、sts 9 5.4 Standard atmospheric conditions for assisted drying 9 5.5 Recovery conditions 9 5.6 Standard installation conditions . 10 5.7 Standard measuring conditions 10 5.8 PDP module state . 10 5.9 Operating conditions . 10 6 Measurements . 10 6.1 General . 10 6.2 Measurement item . 10 6.3 Initial

8、measurements . 10 6.4 Intermediate measurements 10 6.5 Final measurements 11 6.6 Information to be given in the relevant specification . 11 7 Report . 11 8 Temperature and humidity testing methods (operation and storage) 11 8.1 High temperature (storage) 11 8.1.1 Purpose . 11 8.1.2 Test conditions 1

9、1 8.1.3 Testing equipment . 12 8.1.4 Testing procedures 12 8.1.5 Recovery . 12 8.1.6 Measurements . 12 8.1.7 Information to be given in the relevant specification 12 8.2 Low temperature (operation) 13 8.2.1 Purpose . 13 8.2.2 Test conditions 13 8.2.3 Testing equipment . 13 8.2.4 Testing procedures 1

10、3 8.2.5 Recovery . 14 8.2.6 Measurements . 14 8.2.7 Information to be given in the relevant specification 15 8.3 Low temperature (storage) 15 8.3.1 Purpose . 15 8.3.2 Test conditions 15 BS IEC 61988-4-1:2015IEC 61988-4-1:2015 IEC 2015 3 8.3.3 Testing equipment . 15 8.3.4 Testing procedures 15 8.3.5

11、Recovery . 16 8.3.6 Measurements . 16 8.3.7 Information to be given in the relevant specification 16 8.4 Damp heat at steady state (operation) . 16 8.4.1 Purpose . 16 8.4.2 Test conditions 16 8.4.3 Testing equipment . 17 8.4.4 Testing procedures 17 8.4.5 Recovery . 17 8.4.6 Measurements . 17 8.4.7 I

12、nformation to be given in the relevant specification 17 8.5 Damp heat at steady state (storage) 17 8.5.1 Purpose . 17 8.5.2 Test conditions 17 8.5.3 Testing equipment . 18 8.5.4 Testing procedures 18 8.5.5 Recovery . 18 8.5.6 Measurements . 18 8.5.7 Information to be given in the relevant specificat

13、ion 18 8.6 Damp heat, cyclic 19 8.6.1 Purpose . 19 8.6.2 Test conditions 19 8.6.3 Testing equipment . 19 8.6.4 Testing procedure 19 8.6.5 Recovery . 19 8.6.6 Measurements . 19 8.6.7 Information to be given in the relevant specification 19 8.7 Rapid change of temperature with prescribed time of trans

14、ition 20 8.7.1 Purpose . 20 8.7.2 Test conditions 20 8.7.3 Testing equipment . 20 8.7.4 Testing procedures 20 8.7.5 Recovery . 20 8.7.6 Measurements . 20 8.7.7 Information to be given in the relevant specification 21 8.8 Change of temperature with specified rate of change . 21 8.8.1 Purpose . 21 8.8

15、.2 Test condition 21 8.8.3 Testing equipment . 21 8.8.4 Testing procedures 21 8.8.5 Recovery . 21 8.8.6 Measurements . 21 8.8.7 Information to be given in the relevant specification 22 9 Air pressure testing methods 22 9.1 Low air pressure (operation) 22 9.1.1 Purpose . 22 9.1.2 Test conditions 22 B

16、S IEC 61988-4-1:2015 4 IEC 61988-4-1:2015 IEC 2015 9.1.3 Testing equipment . 22 9.1.4 Testing procedures 22 9.1.5 Recovery . 23 9.1.6 Measurements . 23 9.1.7 Information to be given in the relevant specification 23 9.2 Low air pressure (storage) . 23 9.2.1 Purpose . 23 9.2.2 Test conditions 23 9.2.3

17、 Testing equipment . 24 9.2.4 Testing procedures 24 9.2.5 Recovery . 24 9.2.6 Measurements . 24 9.2.7 Information to be given in the relevant specification 24 10 Mechanical testing methods . 24 10.1 Vibration (sinusoidal) 24 10.1.1 Purpose . 24 10.1.2 Equipment . 25 10.1.3 Test conditions 25 10.2 Sh

18、ock . 25 10.2.1 Purpose . 25 10.2.2 Equipment . 25 10.2.3 Test conditions 26 10.3 Transportation drop . 27 10.4 Toppling 27 Figure 1 Testing procedure at low temperature (operation) . 14 Figure 2 Configuration of PDP module directions 25 Figure 3 Example of PDP shock testing equipment . 26 Table 1 S

19、tandard conditions for reference measurements and tests 9 Table 2 Peak value and duration 26 BS IEC 61988-4-1:2015IEC 61988-4-1:2015 IEC 2015 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ PLASMA DISPLAY PANELS Part 4-1: Environmental testing methods Climatic and mechanical FOREWORD 1) The Internatio

20、nal Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic

21、 fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; an

22、y IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standard

23、ization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has repre

24、sentation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC

25、 cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional public

26、ations. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas

27、, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents includin

28、g individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance

29、 upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the eleme

30、nts of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61988-4-1 has been prepared by IEC technical committee 110: Electronic display devices. The text of this standard is based on t

31、he following documents: FDIS Report on voting 110/637/FDIS 110/653/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. BS IEC 61988

32、-4-1:2015 6 IEC 61988-4-1:2015 IEC 2015 A list of all the parts in the IEC 61988 series, under the general title Plasma display panels, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC

33、 web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IMPORTANT The colour inside logo on

34、 the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. BS IEC 61988-4-1:2015IEC 61988-4-1:2015 IEC 2015 7 PLASMA DISPLAY PANELS Part 4-1

35、: Environmental testing methods Climatic and mechanical 1 Scope This part of IEC 61988 defines the following test methods for evaluating the climatic and mechanical endurance characteristics of plasma display modules (PDP modules): a) temperature and humidity tests b) air pressure tests c) mechanica

36、l tests 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including a

37、ny amendments) applies. IEC 60068-1:2013, Environmental testing Part 1: General and guidance IEC 60068-2-1:2007, Environmental testing Part 2: Tests Test A: Cold IEC 60068-2-2:2007, Environmental testing Part 2: Tests Test B: Dry heat IEC 60068-2-6, Environmental testing Part 2: Tests Test Fc: Vibra

38、tion (sinusoidal) IEC 60068-2-13:1983, Basic environmental testing procedures Part 2-13: Tests Test M: Low air pressure IEC 60068-2-14:2009, Environmental testing Part 2-14: Tests Test N: Change of temperature IEC 60068-2-27:2008, Environmental testing Part 2-27: Tests Test Ea and guidance: Shock IE

39、C 60068-2-30:2005, Environmental testing Part 2-30: Tests Test Db: Damp heat, cyclic (12 h + 12 h cycle) IEC 60068-2-78:2012, Environmental testing Part 2-78: Tests Test Cab: Damp heat, steady state IEC 61747-5:1998, Liquid crystal and solid-state display devices Part 5: Environmental, endurance and

40、 mechanical test methods IEC 61988-1, Plasma display panels Part 1: Terminology and letter symbols IEC 61988-2-1, Plasma display panels Part 2-1: Measuring methods Optical and optoelectrical BS IEC 61988-4-1:2015 8 IEC 61988-4-1:2015 IEC 2015 IEC 61988-2-5, Plasma display panels Part 2-5: Measuring

41、methods Acoustic noise ISO 2248, Packaging Complete, filled transport packages Vertical impact test by dropping ISO 4180, Packaging Complete, filled transport packages General rules for the compilation of performance test schedules Part 1: General principles ISO 10531, Packaging Complete, filled tra

42、nsport packages Stability testing of unit loads 3 Terms, definitions and letter symbols For the purposes of this document, the terms, definitions and letter symbols given in IEC 60068-1 and IEC 61988-1, as well as the following apply. 3.1 Popair pressure at which the PDP module is operated during th

43、e tests 3.2 Pstair pressure at which the PDP module is stored in a non-operating state during the tests 4 Environmental tests 4.1 General In this document, tests mean storage or operation tests at high or low temperature, high humidity, low pressure, or combinations thereof, and vibration tests or s

44、hock tests, while measurements mean the characteristic evaluations, i.e. initial, intermediate and final measurements. 4.2 Test items This document describes the following test items: a) temperature and humidity tests (operation); b) temperature and humidity tests (storage); c) air pressure tests; d

45、) mechanical tests. 4.3 Structure of testing equipment The system diagrams and/or driving conditions of the testing equipment shall comply with the structure specified in each item. 5 Standard conditions 5.1 Standard reference atmosphere Temperature: 25 C Air pressure: 101,3 kPa NOTE No requirement

46、for relative humidity is given because correction by calculation is generally not possible. If the parameters to be measured depend on temperature and/or pressure, and the law of dependence is known, the values shall be measured in the conditions specified in 5.3 and, if BS IEC 61988-4-1:2015IEC 619

47、88-4-1:2015 IEC 2015 9 necessary, be corrected by calculation to the standard reference atmospheric conditions above. 5.2 Standard atmospheric conditions for reference measurements and tests If the parameters to be measured depend on temperature, pressure and humidity and the law of dependence is un

48、known, the atmospheric conditions to be specified shall be selected from the following values, as shown in Table 1. Table 1 Standard conditions for reference measurements and tests Temperature Relative humidityaAir pressureaC % RH kPa 20 3 25 3 30 3 35 3 45 to 75 86 to 106 a Inclusive values. 5.3 St

49、andard atmospheric conditions for measurements and tests Unless otherwise specified, all tests and measurements shall be carried out under standard atmospheric conditions: temperature: 15 C to 35 C; relative humidity: 25 % to 85 %, where appropriate; air pressure: 86 kPa to 106 kPa. The absolute humidity of the atmosphere shall not exceed 22 g/m3. 5.4 Standard atmospheric conditions for assisted drying Where assisted