BS ISO 10263-1-2009 Earth-moving machinery - Operator enclosure environment - Terms and definitions《土方机械 操作室环境 术语和定义》.pdf

1、BS ISO10263-1:2009ICS 01.040.53, 53.100NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDEarth-movingmachinery Operatorenclosure environmentPart 1: Terms and definitionsThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommit

2、tee on 30 April2009 BSI 2009ISBN 978 0 580 57405 4Amendments/corrigenda issued since publicationDate CommentsBS ISO 10263-1:2009National forewordThis British Standard is the UK implementation of ISO 10263-1:2009. Itsupersedes BS 6912 22.1:1996 which is withdrawn.The UK participation in its preparati

3、on was entrusted to TechnicalCommittee B/513/1, Earth moving machinery (International).A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for it

4、s correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.-BS ISO 10263-1:2009Reference numberISO 10263-1:2009(E)ISO 2009INTERNATIONAL STANDARD ISO10263-1Second edition2009-02-01Earth-moving machinery Operator enclosure environment Part 1: Terms and defini

5、tions Engins de terrassement Environnement de lenceinte de loprateur Partie 1: Termes et dfinitions BS ISO 10263-1:2009ISO 10263-1:2009(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edit

6、ed unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a tr

7、ademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bod

8、ies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO 2009 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any

9、means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail co

10、pyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2009 All rights reservedBS ISO 10263-1:2009ISO 10263-1:2009(E) ISO 2009 All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies).

11、The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-g

12、overnmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2

13、. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a

14、vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 10263-1 was prepared by Technical Committee ISO/TC 127, Earth-moving machinery, Subcommitte

15、e SC 2, Safety, ergonomics and general requirements. This second edition cancels and replaces the first edition (ISO 10263-1:1994), which has been technically revised. ISO 10263 consists of the following parts, under the general title Earth-moving machinery Operator enclosure environment: Part 1: Te

16、rms and definitions Part 2: Air filter element test method Part 3: Pressurization test method Part 4: Heating, ventilating and air conditioning (HVAC) test method and performance Part 5: Windscreen defrosting system test method Part 6: Determination of effect of solar heating BS ISO 10263-1:2009BS I

17、SO 10263-1:2009INTERNATIONAL STANDARD ISO 10263-1:2009(E) ISO 2009 All rights reserved 1Earth-moving machinery Operator enclosure environment Part 1: Terms and definitions 1 Scope ISO 10263 provides test methods and criteria for the evaluation of the operator enclosure environment in earth-moving ma

18、chinery as defined in ISO 6165. This part of ISO 10263 gives the terms and definitions which are used in other parts of ISO 10263. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. F

19、or undated references, the latest edition of the referenced document (including any amendments) applies. ISO 6165, Earth-moving machinery Basic types Identification and terms and definitions ISO 5353:1995, Earth-moving machinery, and tractors and machinery for agriculture and forestry Seat index poi

20、nt 3 Terms, definitions and abbreviations For the purposes of this document, the following terms, definitions and abbreviations apply. 3.1 air conditioning system system which lowers the effective temperature of the air within the operator enclosure 3.2 air filtration removal of dust particles from

21、the air forced or drawn into the operator enclosure by mechanical means 3.3 cooling decrease of the temperature of the air inside the operator enclosure 3.4 daylight opening DLO maximum unobstructed opening through any glazed aperture, with trim mouldings and mounting seals adjoining the glazed surf

22、ace 3.5 defrosting removal and maintenance of an ice/frost-free window area for visibility BS ISO 10263-1:2009ISO 10263-1:2009(E) 2 ISO 2009 All rights reserved3.6 defrosted area area of the windscreen consisting of dry cleared surface and melted or partially melted (wet) test coating, and excluding

23、 that area of the windscreen covered with dry test coating of ice 3.7 effective temperature combination of relative humidity and temperature which can indicate the level of comfort perceived by the human body 3.8 filter efficiency measure of the ability of the air filter element to remove particulat

24、e matter 3.9 full air conditioning control of the effective temperature and pressure of the air inside the operator enclosure 3.10 heating increase of the temperature of the air inside the operator enclosure 3.11 heating system system which raises the effective temperature of the air within the oper

25、ator enclosure 3.12 heat transfer medium HTM means through which defroster system heating is achieved 3.13 operator enclosure temperature chart diagram of the range of effective temperatures in which the operator environment within the operator enclosure is perceived as desirable 3.14 operator enclo

26、sure part of the machine which completely surrounds the operator, preventing the free passage of external air, dust or other substances into the area around the operator 3.15 operator enclosure air filter element medium in which particulate matter is removed from the incoming air supply 3.16 operato

27、r environment space surrounding the operator defined by temperature and wind speed measurement points 3.17 pressurization pressure differential between the static pressure inside and outside of the operator enclosure 3.18 pressurization system means used to pressurize the operator enclosure, includi

28、ng any components which influence the performance of the system BS ISO 10263-1:2009ISO 10263-1:2009(E) ISO 2009 All rights reserved 33.19 seat index point SIP point in the central, vertical and longitudinal plane of the SIP measuring device NOTE Adapted from ISO 5353:1995, definition 3.1. 3.20 solar

29、 heating heating factor from the sun to be considered in determining air circulation and cooling requirements necessary to maintain comfortable temperature inside the operator enclosure 3.21 solar radiant energy process by which solar heating is generated 3.22 test dust particulate matter used to ev

30、aluate the filter element 3.23 ventilating air change for comfort in the area around the operator in an operator enclosure 3.24 ventilating system system which provides fresh air to, and maintains air circulation within, the operator enclosure 3.25 windscreen defrosting system means intended to defr

31、ost the windscreen 4 Abbreviations DLO daylight opening HTM heat transfer medium HVAC heating, ventilating and air conditioning system (also referred to as climate control system) SIP seat index point BS ISO 10263-1:2009ISO 10263-1:2009(E) 4 ISO 2009 All rights reservedBibliography 1 SAE J1163, Dete

32、rmining seat index point BS ISO 10263-1:2009BS ISO 10263-1:2009ISO 10263-1:2009(E) ICS 01.040.53; 53.100 Price based on 4 pages ISO 2009 All rights reserved BS ISO 10263-1:2009This page has been intentionally left blank BS ISO10263-1:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UK

33、Tel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are

34、updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British

35、Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically receive

36、 the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Websit

37、e http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European andinternational standard

38、s through its Library and its Technical Help to ExportersService. Various BSI electronic information services are also available whichgive details on all its products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept

39、 up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via

40、British StandardsOnline can be found at http:/ information about BSI is available on the BSI website at http:/CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in theUK, of the publications of the international standardization bodies. Except aspermitted under the Cop

41、yright, Designs and Patents Act 1988 no extract maybe reproduced, stored in a retrieval system or transmitted in any form or by anymeans electronic, photocopying, recording or otherwise without prior writtenpermission from BSI.This does not preclude the free use, in the course of implementing the st

42、andard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email: