BS ISO 105-F06-2002 Textiles Tests for colour fastness Specification for silk adjacent fabric《纺织品 色牢度试验 丝贴衬织物规范》.pdf

1、BRITISH STANDARD BS ISO 105-F06:2000 Textiles Tests for colour fastness Part F06: Specification for silk adjacent fabric ICS 59.080.01 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS ISO 105-F06:2000 This British Standard, having been prepared under the direction of the Mate

2、rials and Chemicals Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 2 May 2002 BSI 2 May 2002 ISBN 0 580 39626 6 National foreword This British Standard reproduces verbatim ISO 105-F06:2000 and implements it as the UK national

3、 standard. The UK participation in its preparation was entrusted to Technical Committee TCI/81, Colour fastness and colour measurement, which has the responsibility to: A list of organizations represented on this committee can be obtained on re- quest to its secretary. Cross-references The British S

4、tandards which implement international publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does n

5、ot purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible i

6、nternational/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the

7、ISO title page, pages ii and iii, a blank page, pages 1 to 4, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsReference number ISO 105-F06:2000(E) INTERNATI

8、ONAL STANDARD ISO 105-F06 First edition 2000-02-15 Textiles Tests for colour fastness Part F06: Specification for silk adjacent fabric Textiles Essais de solidit des teintures Partie F06: Spcification pour le tissu tmoin en soieISO105-F06:2000(E) ii ISO 105-F06:2000(E) diii Foreword ISO (the Interna

9、tional Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has be

10、en established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical stan

11、dardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at le

12、ast 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this part of ISO 105 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO 105-F06 was prepared

13、by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 1, Tests for coloured textiles and colorants. ISO 105 was previously published in thirteen “parts”, each designated by a letter (e.g. “Part A”), with publication dates between 1978 and 1985. Each part contained a series of “sections”, each

14、designated by the respective part letter and by a two-digit serial number (e.g. “Section A01”). These sections are now being republished as separate documents, themselves designated “parts” but retaining their earlier alphanumeric designations. A complete list of these parts is given in ISO 105-A01.

15、INTERNATIONAL STANDARD ISO 105-F06:2000(E) 1 Textiles Tests for colour fastness Part F06: Specification for silk adjacent fabric 1 Scope This part of ISO 105 specifies an undyed silk adjacent fabric which may be used for the assessment of staining in colour fastness tests. The staining properties of

16、 the silk adjacent fabric under test are assessed against a silk reference adjacent fabric, using a silk dyed reference fabric, both of which are available from a specified source. 2 Normative references The following normative documents contain provisions which, through reference in this text, cons

17、titute provisions of this part of ISO 105. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of ISO 105 are encouraged to investigate the possibility of applying the most recent editions of the n

18、ormative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 105-A02:1993, Textiles Tests for colour fastness Part A02: Grey scale for assessing

19、change in colour. ISO 105-E01:1994, Textiles Tests for colour fastness Part E01: Colour fastness to water. ISO 105-F02: 1) , Textiles Tests for colour fastness Part F02: Specification for reference adjacent fabrics: Cotton and viscose. ISO 105-J01:1997, Textiles Tests for colour fastness Part J01: G

20、eneral principles for measurement of surface colour. ISO 105-J02:1997, Textiles Tests for colour fastness Part J02: Instrumental assessment of relative whiteness. ISO 3071:1980, Textiles Determination of pH of the aqueous extract. ISO 3072:1975, Wool Determination of solubility in alkali. ISO 3801:1

21、977, Textiles Woven fabrics Determination of mass per unit length and mass per unit area. 1) To be published.ISO 105-F06:2000(E) 2 3 Materials 3.1 Silk adjacent fabric under test, complying with the requirements of clause 4. 3.2 Silk reference adjacent fabric, complying with the requirements of clau

22、se 4. 3.3 Silk dyed reference fabric, complying with the requirements of clause 4 and dyed with C.I. Acid Blue 59. 3.4 Cotton dyed reference fabric, complying with ISO 105-F02 but dyed with C.I. Direct Red 79. NOTE Silk reference adjacent fabric, silk dyed reference fabric and cotton dyed reference

23、fabric are only available from Japanese Standards Association, 1-24 Akasaka 4 Chome, Minato-ku, Tokyo 107, Japan. 4 Specification for the silk adjacent fabric The fabric shall have the following properties: Mass per unit area: (60 3) g/m 2 determined in accordance with ISO 3801. Whiteness value: Y 1

24、0 =9 1 2 W 10 =7 9 3 T 10 = 1 1(i .e . 2to0 ) Measurements shall be made using the instrument geometry d/0, specular included, in accordance with ISO 105-J01. Luminance (Y 10 ), whiteness (W 10 )a n dt i n t( T 10 ) values shall be calculated using CIE standard illuminant D 65 and CIE 1964 supplemen

25、tary standard colorimetric observer (10 observer) in accordance with ISO 105-J02. The pH of the aqueous extract shall be 7,8 0,5 when determined by the method described in ISO 3071. The residual matter, after extraction with diethyl ether, shall not exceed 0,5 %. The alkali solubility shall not exce

26、ed 19 % (m/m) when determined by the method described in ISO 3072, using 16 g/l sodium hydroxide instead of 0,1 mol/l sodium hydroxide as stated in the method. NOTE Information about the production of the silk reference adjacent fabric, silk dyed reference fabric and cotton dyed reference fabric is

27、held in a report by the co-secretariats of ISO/TC38/SC1. 5 Assessment of staining properties of the silk adjacent fabric under test 5.1 General As adjacent fabrics are required to yield reproducible results, when used in colour fastness tests their most important property is standardized staining ch

28、aracteristics. The staining characteristics of the silk adjacent fabric under test shall conform to those of the silk reference adjacent fabric when tested using the silk dyed reference fabric (3.3) and the cotton dyed reference fabric (3.4) separately.ISO 105-F06:2000(E) d3 5.2 Test procedure Place

29、 a silk dyed reference fabric (3.3) between the silk adjacent fabric under test (3.1) and the silk reference adjacent fabric (3.2). To eliminate possible differences in test conditions, use both the silk adjacent fabric under test and the silk reference adjacent fabric in the same composite specimen

30、. Test the specimen according to ISO 105-E01. Repeat the test using the cotton dyed reference fabric (3.4) in place of the silk dyed reference fabric (3.3). 5.3 Performance requirements For both tests performed as in 5.2, the colour difference between the stain of the silk adjacent fabric under test

31、 and the stain of the silk reference adjacent fabric shall not be greater than 4-5 when evaluated using the grey scale for assessing change in colour in accordance with ISO 105-A02.ISO 105-F06:2000(E) 4 Bibliography 1 ISO 105-A01:1994, Textiles Tests for colour fastness Part A01: General principles

32、of testing. 2 ISO/CIE 10526:1999, CIE standard illuminants for colorimetry. 3 ISO/CIE 10527:1991, CIE standard colorimetric observers. 4 CIE Publication No. 15.2, Colorimetry, 2nd ed., 1986.BS ISO 105-F06:2000 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the inde

33、pendent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that th

34、ey possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the

35、identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, inte

36、rnational and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to su

37、pply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various

38、 BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive sub

39、stantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be fo

40、und at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyrig

41、ht, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the st

42、andard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.