BS ISO 10654-1995 Light gauge metal containers - Round open-top cans - Cans for liquid products with added gas defined by their nominal filling volumes《小型量规金属容器 圆形顶部开口罐 由标称灌装容量定义的加.pdf

1、BRITISH STANDARD BSISO 10654:1993 Implementation of ISO10654:1993 Light gauge metal containers Round open-top cans Cans for liquid products with added gas, defined by their nominal filling volumesBSISO10654:1993 This BritishStandard, having been prepared under the directionof the Consumer Products a

2、nd Services Sector Board, was published under theauthority of the Standards Board and comes into effect on 15October1995 BSI02-2000 The following BSI references relate to the work on this standard: Committee referencePKM/7/2 Draft for comment92/36492DC ISBN 0 580 24816 X Committees responsible for t

3、his British Standard The preparation of this BritishStandard was entrusted by Technical Committee PKM/7, Metal containers, upon which the following bodies were represented: British Coatings Federation Ltd. Engineering Equipment and Materials Users Association Metal Packaging Manufacturers Associatio

4、n The following bodies were also represented in the drafting of the standard, through subcommittees and panels: Association of British Preserved Milk Manufacturers Brewers Society British Meat Manufacturers Association Campden and Chorleywood Food Research Association Department of Trade and Industr

5、y (Laboratory of the Government Chemist) Food and Drink Federation Ministry of Defence Pet Food Manufacturers Association Amendments issued since publication Amd. No. Date CommentsBSISO10654:1993 BSI 02-2000 i Contents Page Committees responsible Inside front cover National foreword ii Foreword iii

6、Text of ISO10654 1BSISO10654:1993 ii BSI 02-2000 National foreword This BritishStandard reproduces verbatim ISO10654:1993 and implements it as the UK national standard. Together with BSISO10653, BSISOTR11761, BSISOTR11762 and BSISOTR11776, this BritishStandard supersedes BS6992-1:1988, BS6992-2:1991

7、, BS6992-3:1988, BS6992-4:1989 and BS6992-5:1988 which are withdrawn. This BritishStandard is published under the direction of the Consumer Products and Services Sector Board whose Technical CommitteePKM/7/2 has the responsibility to: aid enquirers to understand the text; present to the responsible

8、international committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. NOTEInternational and EuropeanStandards, as well as overseas standards, are available from Customer

9、 Services, BSI,389 Chiswick High Road, LondonW44AL. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal ob

10、ligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, theISO title page, pages ii to iv, pages1 and 2 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendm

11、ent table on the inside front cover.ISO10654:1993(E) ii BSI 02-2000 Contents Page Foreword iii Introduction 1 1 Scope 1 2 Normative reference 1 3 Dimensions 1 Annex A (informative) Bibliography 2 Table 1 Round open-top cans defined by their nominal filling volumes 1ISO10654:1993(E) BSI 02-2000 iii F

12、oreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing InternationalStandards is normally carried out through ISO technical committees. Each member body interested in a subject for which a tec

13、hnical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters o

14、f electrotechnical standardization. Draft InternationalStandards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least75% of the member bodies casting a vote. InternationalStandard ISO10654 was prepa

15、red by Technical Committee ISO/TC52, Light gauge metal containers, Sub-Committee SC4, Open top containers. Together with ISO10653, ISO/TR11761, ISO/TR11762 and ISO/TR11776, this first edition of ISO10654 cancels and replaces ISO3004-1:1986, ISO3004-2:1989, ISO3004-3:1986, ISO3004-4:1986, ISO3004-5:1

16、988 and ISO3004-6:1986, which have been revised and condensed. Annex A of this InternationalStandard is for information only.iv blankISO10654:1993(E) BSI 02-2000 1 Introduction This InternationalStandard replaces ISO3004-3 for round open-top cans for carbonated drinks. Round open-top cans defined by

17、 their nominal gross lidded capacity, formerly listed in ISO3004-1 to ISO3004-6, are now dealt with in ISO10653. The nominal filling volumes given in this InternationalStandard have been chosen to meet criteria retained in order to reduce the number of standardized volumes in relation to the former

18、InternationalStandard (ISO3004-3). These criteria are the following: a) the can size is produced in a quantity of at least100 million cans per annum; b) the can size was previously listed in Table1 of ISO3004-3:1986; c) the inclusion of the can size has been supported by at least three member bodies

19、 of TC52. NOTE 1The can sizes appearing in this International Standard are classified by their construction type in ISO/TR11762. Can sizes which were previously included in ISO3004-3 but not given in this International Standard are listed for information in ISO/TR11762:1992, Annex A. 1 Scope This In

20、ternationalStandard specifies the nominal filling volumes and related diameters of round open-top cans for a liquid products with added gas. 2 Normative reference The following standard contains provisions which, through reference in this text, constitute provisions of this InternationalStandard. At

21、 the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this InternationalStandard are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below. Members of IEC and ISO ma

22、intain registers of currently valid InternationalStandards. ISO90-1:1986, Light gauge metal containers Definitions and determination methods for dimensions and capacities Part1: Open-top cans. 3 Dimensions Nominal filling volumes and related nominal diameters shall be as listed in Table 1. Diameters

23、 shall be determined in accordance with ISO90-1. Table 1 Round open-top cans defined by their nominal filling volumes Nominal filling volume a ml Nominal diameters of bodies mm 250 53 and66 330 66 500 66 a Nominal filling volume is defined in ISO90-1 as the volume of product that the can is required

24、 to hold.ISO10654:1993(E) 2 BSI 02-2000 Annex A (informative) Bibliography 1 ISO10653:1993, Light-gauge metal containers Round open-top cans Cans defined by their nominal gross lidded capacities. 2 ISO/TR11762:1992, Light-gauge metal containers Round open-top cans for liquid products with added gas

25、Classification of can sizes by construction type.blankBSISO 10654:1993 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international leve

26、l. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grat

27、eful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service call

28、ed PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international sta

29、ndards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help

30、to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substanti

31、al discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standa

32、rdization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not prec

33、lude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.