BS ISO 11438-8-1994 Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of indium content《镍铁合金 采用电热原子吸收光谱测.pdf

1、BRITISH STANDARD BS ISO 11438-8:1993 Implementation of ISO11438-8:1993 Ferronickel Determination of trace-element content by electrothermal atomic absorption spectrometric method Part 8: Determination of indium content UDC 669.245:543.422.064:546.628BSISO11438-8:1993 This BritishStandard, having bee

2、n prepared under the directionof the Non-ferrous Metals Standards Policy Committee, was published underthe authority of the Standards Board and comesintoeffect on 15May1994 BSI02-2000 The following BSI references relate to the work on this standard: Committee reference NFM/10 Draft for comment92/420

3、93 DC ISBN 0 580 23358 8 Committees responsible for this British Standard The preparation of this BritishStandard was entrusted by the Non-ferrous Metals Standards Policy Committee (NFM/-) to Technical Committee NFM/10, upon which the following bodies were represented: Association of Bronze and Bras

4、s Founders British Non-ferrous Metals Federation British Stainless Steel Association British Steel Industry Department of Trade and Industry (Laboratory of the Government Chemist) Engineering Equipment and Materials Users Association Institute of British Foundrymen London Metal Exchange Ministry of

5、Defence Nickel Development Institute Non-ferrous Metal Stockists Steel Casting Research and Trade Association Coopted members Amendments issued since publication Amd. No. Date CommentsBSISO11438-8:1993 BSI 02-2000 i Contents Page Committees responsible Inside front cover National foreword ii Forewor

6、d iii Text of ISO11438-8 1BSISO11438-8:1993 ii BSI 02-2000 National foreword This BritishStandard reproduces verbatim ISO11438-8:1993 and implements it as the UK national standard. This BritishStandard is published under the direction of the Non-ferrous Metals Standards Policy Committee whose Techni

7、cal Committee NFM/10 has the responsibility to: aid enquirers to understand the text; present to the responsible international committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate th

8、em in the UK. NOTEInternational and European Standards, as well as overseas standards, are available from Customer Services, Publications, BSI, Linford Wood, Milton Keynes, MK146LE. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards

9、are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, theISO title page, pagesii toiv, pages1 and2 and a back cover. Thi

10、s standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.ISO11438-8:1993(E) ii BSI 02-2000 Contents Page Foreword iii 1 Scope 1 2 Normative references 1 3 Principle 1 4 Reagents 1 5 Apparatus 1

11、6 Sampling and sample preparation 1 7 Procedure 1 7.1 Preparation of test solution 1 7.2 Blank test 1 7.3 Determination by the standard additions method 1 7.3.1 Atomic absorption measurements 1 7.3.2 Semi-quantitative estimation of the indium content 1 7.3.3 Quantitative determination of the indium

12、content 1 7.3.4 Plotting of standard additions 1 7.4 Number of determinations 1 8 Expression of results 2 8.1 Calculation 2 8.1.1 Semi-quantitative estimation of the indium content 2 8.1.2 Quantitative determination of the indium content 2 8.1.3 Calculation of the indium content 2 8.2 Precision 2 8.

13、2.1 Laboratory tests 2 8.2.2 Statistical analysis 2 9 Test report 2 Table 1 Nominal composition of test samples 2 Table 2 Results of statistical analysis 2ISO11438-8:1993(E) BSI 02-2000 iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standa

14、rds bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organ

15、izations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are ci

16、rculated to the member bodies for voting. Publication as an International Standard requires approval by at least75% of the member bodies casting a vote. International Standard ISO11438-8 was prepared by Technical Committee ISO/TC155, Nickel and nickel alloys, Sub-Committee SC3, Analysis of nickel an

17、d ferronickel. ISO11438 consists of the following parts, under the general title Ferronickel Determination of trace-element content by electrothermal atomic absorption spectrometric method: Part1: General requirements and sample dissolution; Part2: Determination of lead content; Part3: Determination

18、 of antimony content; Part4: Determination of tin content; Part5: Determination of tellurium content; Part6: Determination of thallium content; Part7: Determination of silver content; Part8: Determination of indium content.iv blankISO11438-8:1993(E) BSI 02-2000 1 1 Scope This part of ISO11438 specif

19、ies an electrothermal atomic absorption spectrometric method for the determination of indium in the range of0,5g/t to2,5g/t in ferronickel, according to the principle of standard additions. The general requirements concerning the apparatus, sampling, dissolution of the test sample, procedure, calcul

20、ation and test report are given in ISO11438-1. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this part of ISO11438. At the time of publication, the editions indicated were valid. All standards are subject to revision

21、, and parties to agreements based on this part of ISO11438 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO5725:1986, Precision of test method

22、s Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests. ISO11438-1:1993, Ferronickel Determination of trace-element content by electrothermal atomic absorption spectrometric method Part1: General requirements and sample dissolution. 3 Principle Diss

23、olution of a test portion in nitric acid. Measurement of the absorption of the resonance line energy from the spectrum of indium in the test solution at a wavelength of325,6nm by an atomic absorption spectrometer fitted with a graphite furnace electrothermal atomizer. Calibration by the standard add

24、itions method described in ISO11438-1. 4 Reagents In addition to the reagents listed in ISO11438-1, the following special reagents are required. 4.1 Indium, standard reference solution(1000mg/l). Weigh, to the nearest0,0005g,0,1000g of indium metal of99,9%(m/m) minimum purity. Transfer to a100ml bea

25、ker and dissolve in a mixture of10ml of nitric acid( 20 =1,41g/ml) diluted1+1. Heat until completely dissolved. Boil to expel nitrogen oxides. Cool the solution and transfer to a100ml one-mark volumetric flask. Add5ml of nitric acid ( 20 =1,41g/ml), make up to the mark with water and mix thoroughly.

26、 4.2 Indium, standard solution(10,0mg/l). Pipette10,0ml of the indium standard reference solution(4.1) into a1000ml one-mark volumetric flask containing50ml of nitric acid ( 20 =1,41g/ml) diluted1+1. Make up to the mark with water and mix thoroughly. This solution shall be prepared on the day of use

27、. 4.3 Indium, working standard solution(1,0mg/l). Pipette10,0ml of the indium standard solution(4.2) into a100ml one-mark volumetric flask containing5ml of nitric acid ( 20 =1,41g/ml) diluted1+1. Make up to the mark with water and mix thoroughly. This solution shall be freshly prepared. 5 Apparatus

28、The apparatus required is specified in clause5 of ISO11438-1:1993. 6 Sampling and sample preparation Refer to clause6 of ISO11438-1:1993. 7 Procedure 7.1 Preparation of test solution Proceed as directed in7.1 of ISO11438-1:1993. 7.2 Blank test Refer to7.2 of ISO11438-1:1993. 7.3 Determination by the

29、 standard additions method 7.3.1 Atomic absorption measurements Use the peak area integration absorbance measurement at a wavelength of325,6nm and proceed with checking the electrothermal atomizer as directed in7.3.1 of ISO11438-1:1993. 7.3.2 Semi-quantitative estimation of the indium content Procee

30、d as directed in7.3.2 of ISO11438-1:1993. 7.3.3 Quantitative determination of the indium content Proceed as directed in7.3.3 of ISO11438-1:1993. 7.3.4 Plotting of standard additions Proceed as directed in7.3.4 of ISO11438-1:1993. NOTE 1The procedure is applicable to the linear part of the graphs. 7.

31、4 Number of determinations Carry out the determination at least in duplicate.ISO11438-8:1993(E) 2 BSI 02-2000 8 Expression of results 8.1 Calculation 8.1.1 Semi-quantitative estimation of the indium content Proceed as directed in8.1.1 of ISO11438-1:1993. 8.1.2 Quantitative determination of the indiu

32、m content Proceed as directed in8.1.2 of ISO11438-1:1993. 8.1.3 Calculation of the indium content Calculate the indium content w Inof the test sample, in grams per tonne, using the formula 8.2 Precision 8.2.1 Laboratory tests Five laboratories in three countries participated in the testing of this p

33、rocedure using two samples of nominal composition given in Table 1. Samples were analysed three times on different days. 8.2.2 Statistical analysis 8.2.2.1 Results from the interlaboratory test programme were evaluated according to ISO5725 as described in8.2.2 of ISO11438-1:1993. The results of this

34、 analysis are given in Table 2. 8.2.2.2 All the laboratories passed statistical tests. 9 Test report Refer to clause10 of ISO11438-1:1993. Table 1 Nominal composition of test samples Table 2 Results of statistical analysis where In is the indium concentration, in micrograms per litre, found in the “

35、zero” test solution, in accordance with8.1.2 of ISO11438-1:1993; m is the mass, in grams, of the test portion; w In F In 10m - = F is the dilution factor of2,5. Sample Content, g/t Content,% (m/m) Pb Sb Sn Te TI Ag In Bi As Se Cd Ga Ge Zn Ni Fe 1 1 1 1 0,5 0,5 1 0,5 0,1 3 0,5 0,5 2 1 2 25 Remainder

36、2 6 4 10 2 1 6 2 1 5 3 1 4 4 5 25 Remainder Sample 1 2 Mean w Ing/t 0,48 2,13 Within-laboratory standard deviation 0,2 0,2 Between-laboratory standard deviation 0,04 Repeatability 0,4 0,4 Reproducibility 0,4 0,4blankBS ISO 11438-8:1993 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInst

37、itution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards shou

38、ld make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committe

39、e responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, int

40、ernational and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise reque

41、sted. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and service

42、s. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:0208996

43、7002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retri

44、eval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designatio

45、ns. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.