BS ISO 11858-1999 Textile floor coverings - Determination of friability of attached foams《铺地织物 接触泡沫易碎性的测定》.pdf

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS ISO 11858:1999 ICS 59.

2、080.60 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Textile floor coverings Determination of friability of attached foamsThis British Standard, having been prepared under the direction of the Sector Committee for Materials and Chemicals, was published under the authority of

3、 the Standards Committee and comes into effect on 15 November 1999 BSI 11-1999 ISBN 0 580 35235 8 BS ISO 11858:1999 Amendments issued since publication Amd. No. Date Comments National foreword This British Standard reproduces verbatim ISO 11858:1999 and implements it as the UK national standard. The

4、 UK participation in its preparation was entrusted to Technical Committee PRI/3, Textile floor coverings, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, a

5、nd keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or Europea

6、n publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessa

7、ry provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, page

8、s ii and iii, a blank page, pages 1 to 5 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.A Referencenumbe r ISO11858:1999 (E) INTERNATIONAL STANDARD ISO 11858 Firstedition 19991015 TextilefloorcoveringsDetermination offriabilityofatta

9、chedfoams RevtementsdesolstextilesDterminationdelafriabilitdes souscouchesenmousseISO11858:1999(E) ii Foreword ISO (the InternationalOrganizationforStandardization)isaworldwidefederationofnationalstandardsbodies(ISO memberbodies).TheworkofpreparingInternationalStandardsisnormallycarriedoutthroughISO

10、technical committees.Eachmemberbodyinterestedinasubjectforwhichatechnicalcommitteehasbeenestablishedhas therighttoberepresentedonthatcommittee.Internationalorganizations,governmentalandnongovernmental,in liaisonwithISO,alsotakepartinthework.ISOcollaboratescloselywiththeInternationalElectrotechnical

11、Commission(IEC)onallmattersofelectrotechnicalstandardization. InternationalStandardsaredraftedinaccordancewiththerulesgivenintheISO/IECDirectives,Part3. DraftInternationalStandardsadoptedbythetechnicalcommitteesarecirculatedtoth ememberbodiesforvoting. PublicationasanInternationalStandardrequiresapp

12、rovalbyatleast75%ofthememberbodiescastingavote. InternationalStandard11858waspreparedbyTechnicalCommitteeISO/TC38, Textiles,subcommitteeSC12 Textile floorcoverings. InternationalStandardISO11858waspreparedbyTechnica lCommitteeISO/TC38,Textiles,SubcommitteeSC12 Textilefloorcoverings. AnnexAformsanorm

13、ativepartofthisInternationalStandard.ISO11858:1999(E) iii Introduction Textilefloorcoveringscanberolledwiththeusesurfacetowardsthecentre.Asaresult,anyattache d foam backing willbeontheoutsideoftherollandcanb esubjectedtovariousabrasiveactionspriortoandduringinstallation. Theseactionscanresultinthere

14、adycrumblingofanattachedfoambackingi f it is easily friable. Also, when textile floorcoveringsaredisplayedforsaleinawaterfallor similar mode, customers frequently use strong thumb action to applyfrictionalstresstoanattachedfoambacking,whichwillbeconsideredunsatisfactoryifitbreaksdown .Thus thereisan

15、eedforatesttoassessthefriabilityofattachedfoambackingsonthenew,unagedcarpet.INTERNATIONALSTANDARD ISO11858:1999(E) 1 TextilefloorcoveringsDeterminationoffriability ofattachedfoams 1Scope 1.1 ThisInternationalStandardspecifiesaprocedureforassessingthefriabilityoffoambackingsattache dto textilefloorco

16、verings. 1.2 ThisInternationalStandardisnotsuitableforevaluatingthepropensityofafoambackingt obreakdownafter installation,sincesuchbreakdownisinvariablyduetoacombinationofflexingfatigueandoxidation,factorswhich arenotcoveredinthisInternationalStandard. 2Normativereferences The following normativedoc

17、umentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsof thisInternationalStandard.Fordatedreferences,subsequentamendmentsto,orrevisionsof ,anyofthese publications do not apply. However, partiestoagreementsbasedonthisInternationalStandardareencouragedto investigatethepossibilit

18、yofapplyingthemostrecenteditionsofth enormativedocumentsindicatedbelow.For undatedreferences,thelatesteditionofthenormativedocumentreferredtoapplies.MembersofISOandIEC maintainregistersofcurrentlyvalidInternationalStandards. ISO105A01:1994, TextilesTestsforcolourfastnessPartA01:Generalprinciplesofte

19、sting ISO105X12:1993, TextilesTestsforcolourfastnessPartX12:Colourfastnesstorubbing. ISO139:1973, TextilesStandardatmospheresforconditioningandtesting . ISO1957: 1) , MachinemadetextilefloorcoveringsSamplingandcuttingspecimensforphysicaltests. ISO2424:1992, TextilefloorcoveringsVocabulary. 3Termandd

20、efinition ForthepurposesofthisInternationalStandard,thefollowingtermanddefinitionappliesinadditiont orelevant definitionsinISO2424. 3.1 friability easeofbreakingdownorcrumblingunderanappliedstress 1) Tobepublished.(RevisionofISO1957:1986)ISO11858:1999(E) 2 4Principle Theattachedfoambackingofatextile

21、floorcoveringisrubbedwit ha rod having a hemispherical end covered with astandardcottonfabric.Thedegreeofbreakdownofthefoambackingisassessedbymeansofphotographic standards(seeannexA). 5Apparatusandmaterials 5.1Asuitabledeviceforrubbingthetestspecimen. 5.1.1 Apparatuscapableofmovingarubbingfingertoan

22、dfroinastraightline alonga10 0 mmtrackon thespecimen(asuitablepieceofequipmentisthatusedfortestingfastnesstowetanddryrubbinge.gin ISO105X12:1993). 5.1.2Rubbin gfinger,comprisingacylinderof(16 1)mmdiameterwithahemisphericalendthatrubsthe specimen;thedownwardforceexertedbythefingershallbe(9,0 0,1)N(se

23、eFigure1). 5.2 A sheet metal frame,suitableforholdingatestspecimenonthebaseoftheapparatus(seeFigure2).The frameshallbe(20 0 5) mmlongandhaveaUcrosssectionwithth e bottom of theU (50 3)m m wide (the width ofthetesterbase)andeachleg(2 5 2)mm . The (200 3 50) mm face oftheframeshallhaveanaperturecutini

24、t (180 5)mm 3(25 2)mminsize,inordertoexposeasufficientareaofthespecimenfortesting. 5.3Combed cottoncloth,bleachedandfreefromsizesandfinishes,inaplainweavewithapproximately (32 333)yarns/cm,cutinto(50 2)mmsquares(seeISO105X12:1993). 5.4Ligh tboxviewingcabinet,uniformgreyincolourandofsuitablesizetotak

25、ethetestedspecimenand photographicscalewithprovisionforilluminatingtestspecimenswithalowangleofillumination(10 1)to aminimumof600lx.(Asuitablepieceofequipmentisusedforviewingfastnessspecimensandisgivenin ISO105A01.) 5.5Photographicstandards, inaccordancewithannexA. 6Sampling 6.1 Samplingshallbeinacc

26、ordancewiththeprinciplesofISO1957,andeachlaboratory sampleshallbefull width 3(250 10)mminlength. 6.2 Inordertoevaluatepossiblesidetomiddlevariationsincuring,specimensshallbetakenfro m the centre and from within 200 mm ofeachsideofthesample.Twospecimens,onelengthwiseandonecrosswise,shallbetaken frome

27、achofthethreelocations. 7Atmosphereforconditioningandtesting Testspecimensshallbeconditionedfor2 4hinthestandardatmospherespecifiedinISO139priortotesting. Testingshallbecarriedoutinthesamestandardatmosphere. 8Procedure 8.1 Placeaspecimen,foamsideup,onthebaseandholditinplacebymeansofthemetalframe(5.2

28、)(Figure2). 8.2 Placea newdrysquareofwhitecottontestcloth(5.3)overthehemisphericalendoftherubbingfinger(5.1.2) in such an orientation thatitisata45biastothedirectionoftraveloftherubbingfingerduringthetest.Fastenthe clothinplacewithacircularspringclip. ISO11858:1999(E) 3 Dimensionsinmillimetres Figur

29、e1Deviceforrubbingthetestspecimen Dimensionsinmillimetres Figure2Frameforholdingtestspecimen 8.3 Positiontherubbingfingersothatitisattheextremityofitsstrokean dloweritontothetestspecimen. Operatetheapparatus(5.1.1)fortwocompletestrokes,i.e.twocompletebackwardandforwardmovements. 8.4 Place eachtestsp

30、ecimenonahorizontalsurfaceintheviewingcabinet(5.4),orientatedsothatthelengthof thespecimenliesinthedirectionofviewingoftheobserver.Assignaratingbyreferencet othephotographic standards(5.5,seeannexA).Wholenumberratingsshallbemadebytw ooperatorsactingindependentlyandthe resultsthenaveraged.ISO11858:19

31、99(E) 4 9Precisionofresults No precision data forthismethodoftestarecurrentlyavailable.Interlaboratorytrialdataarebeingobtainedanditis intendedthataprecisionstatementbasedonthesewillbeaddedatthefirstrevision. 10TestReport Thetestreportshallincludethefollowinginformation: a) referencetothisInternatio

32、nalStandard,i.e.ISO11858; b) identificationofthesample; c) individualratingsforthesixtestspecimens,eachbeingidentifiedas toitslocation(sideorcentre)andasto direction; d) thedateofthetest. ISO11858:1999(E) 5 AnnexA (normative) PhotographicstandardsBS ISO 11858:1999 BSI 389 Chiswick High Road London W

33、4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is

34、 the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sur

35、e that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsi

36、ble, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, interna

37、tional and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise re

38、quested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and serv

39、ices. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Te

40、l: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, st

41、ored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or g

42、rade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.