BS ISO 12277-2000 Aerospace - Gang channel self-locking floating standard series with counterbore classifications - 1100 MPa (at ambient temperature) 120 C 1100 MPa (at ambient tem.pdf

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS ISO 12277:2000 ICS 49.

2、030.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Aerospace Gang channel, self-locking, floating, standard series, with counterbore, classifications: 1 100 MPa (at ambient temperature)/1208C, 1 100 MPa (at ambient temperature)/2358C and 1 100 MPa (at ambient temperature)/

3、4258C DimensionsThis British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 November 2000 BSI 11-2000 ISBN 0 580 36574 3 BS ISO 12277:2000 Amendments issued since publica

4、tion Amd. No. Date Comments National foreword This British Standard reproduces verbatim ISO 12277:2000 and implements it as the UK national standard. The UK participation in its preparation was entrusted by Technical Committee ACE/12, Aerospace Fasteners and Fastening systems, Details and Parts, to

5、Subcommittee ACE/12/1, Aeroespace Fasteners and Fastening systems, Details and Parts (international), which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and k

6、eep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European

7、 publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessar

8、y provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages

9、 ii to iv, pages 1 to 3 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.INTERNATIONAL STANDARD ISO 12277 Firstedition 2000-09-01 Referencenumber ISO12277:2000(E) AerospaceGangchannel,self-locking, floating,standardseries,withcounterbo

10、re, classifications:1100MPa(atambient temperature)/120C,1100MPa(atambient temperature)/235Cand1100MPa(at ambienttemperature)/425CDimensions Aronautique et espace Bandes crous prisonniers, freinage interne, flottants, srie normale, avec chambrage, classifications: 1 100 MPa ( temprature ambiante)/120

11、 C, 1 100 MPa ( temprature ambiante)/235 C et 1 100 MPa ( temprature ambiante)/425 C DimensionsISO12277:2000(E) ii ISO12277:2000(E)iii Foreword ISO(theInternationalOrganizationforStandardization)isaworldwidefederationofnationalstandardsbodies(ISO memberbodies).TheworkofpreparingInternationalStandard

12、sisnormallycarriedoutthroughISOtechnicalcom- mittees.Eachmemberbodyinterestedinasubjectforwhichatechnicalcommitteehasbeenestablishedhasthe righttoberepresentedonthatcommittee.Internationalorganizations,governmentalandnon-governmental,inliai- sonwithISO,alsotakepartinthework.ISOcollaboratescloselywit

13、htheInternationalElectrotechnicalCommission (IEC)onallmattersofelectrotechnicalstandardization. InternationalStandardsaredraftedinaccordancewiththerulesgivenintheISO/IECDirectives,Part3. DraftInternationalStandardsadoptedbythetechnicalcommitteesarecirculatedtothememberbodiesforvoting. Publicationasa

14、nInternationalStandardrequiresapprovalbyatleast75%ofthememberbodiescastingavote. AttentionisdrawntothepossibilitythatsomeoftheelementsofthisInternationalStandardmaybethesubjectof patentrights.ISOshallnotbeheldresponsibleforidentifyinganyorallsuchpatentrights. InternationalStandardISO12277wasprepared

15、byTechnicalCommitteeISO/TC20, Aircraft and space vehicles, SubcommitteeSC4, Aerospace fastener systems.ISO12277:2000(E) iv Introduction ThedimensionsspecifiedinthisInternationalStandardhavebeendeterminedtoallowproductionofapartwhichwill satisfytherequirementsoftheprocurementspecificationISO5858.INTE

16、RNATIONALSTANDARD ISO12277:2000(E)1 AerospaceGangchannel,self-locking,floating,standardseries, withcounterbore,classifications:1100MPa(atambient temperature)/120C,1100MPa(atambienttemperature)/235C and1100MPa(atambienttemperature)/425CDimensions 1Scope ThisInternationalStandardspecifiesthedimensions

17、ofstandardseriesgangchannelswithself-locking,floating nuts,withcounterbore,withMJthreads,ofclassifications: 1) / 2) , 1) / 2) , 1) / 2) . ThisInternationalStandardisonlyapplicabletothecompilationofaerospaceproductstandards. 2Normativereferences Thefollowingnormativedocumentscontainprovisionswhich,th

18、roughreferenceinthistext,constituteprovisionsof thisInternationalStandard.Fordatedreferences,subsequentamendmentsto,orrevisionsof,anyofthesepublica- tionsdonotapply.However,partiestoagreementsbasedonthisInternationalStandardareencouragedtoinvesti- gatethepossibilityofapplyingthemostrecenteditionsoft

19、henormativedocumentsindicatedbelow.Forundated references,thelatesteditionofthenormativedocumentreferredtoapplies.MembersofISOandIECmaintain registersofcurrentlyvalidInternationalStandards. ISO5855-2:1999, Aerospace MJ threads Part 2: Limit dimensions for bolts and nuts. ISO5858:1999, Aerospace Nuts,

20、 self-locking, with maximum operating temperature less than or equal to 425 C Procurement specification. ISO8788:2000, Aerospace Nuts, metric Tolerances of form and position. 3 Configurationanddimensions SeeFigure1andTable1.Dimensionsandtolerancesareinmillimetres.Theyapplyafteranysurfacecoating(s)bu

21、t beforetheapplicationofanylubricant. Themetalliccap(optional)shallremainjoined(typeofattachmentattheusersdiscretion)tothenutatthemaximum operatingtemperature.SeetestconditionsinISO5858. 1) Correspondstotheminimumtensilestresswhichthenutisabletowithstandatambienttemperaturewithoutbreakingor cracking

22、whentestedwithaboltofahigherstrengthclass. 2) Maximumtemperaturethatthenutisabletowithstand,withoutpermanentalterationtoitsoriginalcharacteristics,afterambi- enttemperaturehasbeenrestored.Themaximumtemperatureisconditionedeitherbythematerialorbythesurfacetreatment. 1100MPa120 C 1100MPa 235 C 1100MPa

23、 425 C ISO12277:2000(E) 2 Key 1Gang 2Nut 3 Metalliccap TolerancesofformandpositionshallconformtothosespecifiedinISO8788.Detailsofformnotstatedareatthe manufacturersoption. a Thesevalues,inmicrometres,arevalidpriortoanysurfacecoating(s).Thevaluesdonotapplytothreads,punchedholesor shearedgesthesurface

24、textureofwhichwillbeasachievedbytheusualmanufacturingmethods. b Thegangexternalformandthenutretentionfeaturearelefttothemanufacturersdiscretion. c Formout-of-roundinthisareatoachievetheself-lockingtorquerequirement.Toolingmarkspermissibleinthisarea d Thread e Standardlength:200max. Figure1ISO12277:2

25、000(E)3 Table1 Diameter code Thread a bc max.max.max.min.min. max.min.max.max.max.max.max.min. 040 MJ4 0,7-4H6H 5,3 0,4 6,6 8 18 4,4 2,2 6,7 10,6 5,8 0,8 11 13 5,5 0,250,75 050 MJ5 0,8-4H6H 6,6 8,1 9 20 5,5 2,4 13,2 6,9 11,413,4 6,5 060 MJ6 1-4H5H 7,3 9,2 11 24 6,5 2,7 14,7 8,1 12,714,7 7,5 080 MJ8

26、1-4H5H 9 0,512,8 14 30 8,5 12,718 9,9 1 15 18 9,5 a InaccordancewithISO5855-2.Intheself-lockingzone,thetolerancesapplybeforeformingout-of-round. b FirstnominalvaluesofnutspacingIncrements: 1stchoice:6 2ndchoice:2 c Maximumintrusionofthebolt. BCDEFGHJKMNPQSVWBS ISO 12277:2000 BSI 389 Chiswick High Ro

27、ad London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institu

28、tion BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards shou

29、ld make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committ

30、ee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all B

31、SI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless o

32、therwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its produc

33、ts and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Adminis

34、tration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be rep

35、roduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size

36、, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.