BS ISO 12965-2000 Butadiene rubber - Determination of microstructure by infra-red spectrometry《丁二烯橡胶 用红外线光谱法测定微观结构》.pdf

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS ISO 12965:2000 ICS 83.

2、060 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Butadiene rubber Determination of microstructure by infra-red spectrometryThis British Standard, having been prepared under the direction of the Sector Committee for Materials and Chemicals, was published under the authority

3、of the Standards Committee and comes into effect on 15 December 2000 BSI 12-2000 ISBN 0 580 36736 3 BS ISO 12965:2000 Amendments issued since publication Amd. No. Date Comments National foreword This British Standard reproduces verbatim ISO 12965:2000 and implements it as the UK national standard. T

4、he UK participation in its preparation was entrusted to Technical Committee PRI/23, Chemical test methods for rubber, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals f

5、or change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement internationa

6、l or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all

7、 the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the ISO titl

8、e page, pages ii to iv, pages 1 to 7 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.Referencenumber ISO12965:2000(E) INTERNATIONAL STANDARD ISO 12965 Firstedition 2000-09-15 ButadienerubberDeterminationof microstructurebyinfra-redspe

9、ctrometry CaoutchoucbutadineDterminationdelamicrostructurepar spectromtrieinfrarougeISO12965:2000(E) ii ISO12965:2000(E)iii Contents Page Foreword.iv 1 Scope1 2 Normativereferences1 3 Principle1 4 Reagent.1 5 Apparatus.1 6 Sampling.2 7 Procedure.2 8 Precision.5 9 Testreport7ISO12965:2000(E) iv Forew

10、ord ISO(theInternationalOrganizationforStandardization)isaworldwidefederationofnationalstandardsbodies(ISO memberbodies).TheworkofpreparingInternationalStandardsisnormallycarriedoutthroughISOtechnical committees.Eachmemberbodyinterestedinasubjectforwhichatechnicalcommitteehasbeenestablishedhas theri

11、ghttoberepresentedonthatcommittee.Internationalorganizations,governmentalandnon-governmental,in liaisonwithISO,alsotakepartinthework.ISOcollaboratescloselywiththeInternationalElectrotechnical Commission(IEC)onallmattersofelectrotechnicalstandardization. InternationalStandardsaredraftedinaccordancewi

12、ththerulesgivenintheISO/IECDirectives,Part3. DraftInternationalStandardsadoptedbythetechnicalcommitteesarecirculatedtothememberbodiesforvoting. PublicationasanInternationalStandardrequiresapprovalbyatleast75%ofthememberbodiescastingavote. AttentionisdrawntothepossibilitythatsomeoftheelementsofthisIn

13、ternationalStandardmaybethesubjectof patentrights.ISOshallnotbeheldresponsibleforidentifyinganyorallsuchpatentrights. InternationalStandardISO12965waspreparedbyTechnicalCommitteeISO/TC45,Rubberandrubberproducts, SubcommitteeSC2,Testingandanalyses.INTERNATIONALSTANDARD ISO12965:2000(E)1 Butadienerubb

14、erDeterminationofmicrostructurebyinfra-red spectrometry WARNINGPersonsusingthisInternationalStandardshouldbefamiliarwithnormallaboratorypractice. Thisstandarddoesnotpurporttoaddressallofthesafetyproblems,ifany,associatedwithitsuse.Itis theresponsibilityoftheusertoestablishappropriatesafetyandhealthp

15、racticesandtoensurecompliance withanynationalregulatoryconditions. 1 Scope ThisInternationalStandardspecifiesamethodforthedeterminationofthemicrostructureofbutadienerubber(BR) byinfra-redspectrometryusingacastfilm. 2 Normativereferences Thefollowingnormativedocumentscontainprovisionswhich,throughref

16、erenceinthistext,constituteprovisionsof thisInternationalStandard.Fordatedreferences,subsequentamendmentsto,orrevisionsof,anyofthese publicationsdonotapply.However,partiestoagreementsbasedonthisInternationalStandardareencouragedto investigatethepossibilityofapplyingthemostrecenteditionsofthenormativ

17、edocumentsindicatedbelow.For undatedreferences,thelatesteditionofthenormativedocumentreferredtoapplies.MembersofISOandIEC maintainregistersofcurrentlyvalidInternationalStandards. ISO1407:1992,RubberDeterminationofsolventextract. ISO1795:2000,Rubber,rawnaturalandrawsyntheticSamplingandfurtherpreparat

18、iveprocedures. ISO/TR9272:1986,RubberandrubberproductsDeterminationofprecisionfortestmethodstandards. 3Principle 3.1 Asmallquantityofextractedrubberisdissolvedinmethylenechlorideandcastonasaltplate. 3.2 Aspectrumisobtainedovertherange2000cm 1 to600cm 1 .Fromtheabsorbancesatfixedwavelengths, thecis,t

19、ransandvinylcontentsarecalculated. 4 Reagent 4.1 Methylenechloride. 5 Apparatus 5.1 Double-beaminfraredspectrophotometerorFourier-transforminfra-red(FTIR)spectrophotometer, with2cm 1 resolution.Theinstrumentshallbecapableofscaleexpansionalongtheabsorbanceortransmittance axisoverthespectralregionof20

20、00cm 1 to600cm 1 .ISO12965:2000(E) 2 5.2 Saltplate. 5.3 Balance,weighingto0,1mg. 5.4 Vacuumoven,operatingat50Cto60C. 6 Sampling SampletherawrubberinaccordancewithISO1795. 7 Procedure 7.1 Millthetestsampletoasthinasheetaspossible.ExtracttherubberinaccordancewithISO1407using ethanol/tolueneazeotrope(E

21、TA).Drytheextractedrubberundervacuumintheovenat50Cto60C. 7.2 Takeapproximately100mgofextractedsampleanddissolveitinaround20mlofmethylenechloride.Ifgel ispresent,filterthesolution. 7.3 Ensurethatthesaltplateislevelledhorizontallybeforethefilmiscast.Place3or4dropsofthesolutionon theplateandspreadevenl

22、yoverthebeamarea.Allowthesolventtoevaporate,preferablyatroomtemperature. 7.4 Checkthatthetransmittanceoverthemeasurementrangeliesbetween50%and30%.Ifgrosslyoutside theselimits,cleanthesaltplateandrepeatstep7.3withmoreorlesssolution. 7.5 When7.4issatisfied,scanovertherange2000cm 1 to600cm 1 . 7.6 Draw

23、abaselinefrom2000cm 1 to600cm 1 ,takingcarethatnopeaksarecut(seeFigures1,2and3for medium-,low-andhigh-cispolybutadiene). 7.7 Measuretheabsorbancesat965cm 1 (A 965 ),909cm 1 (A 909 )and728cm 1 (A 728 ).Theseareanindication ofthetrans(A 965 ),vinyl(A 909 )andcis(A 728 )contents. 7.8 Normalizetheabovea

24、bsorbancesusingthefollowingequations: 965 965 965 909 728 % 100 A A AAA 909 909 965 909 728 % 100 A A AAA 728 728 965 909 728 % 100 A A AAA 7.9 Calculatethecontentsofthedifferentisomers,c cis ,c trans andc vinyl ,ing/dm 3 ,usingthefollowingequations: 728 965 909 1,7896 % 0,0253 % 0,0085 %cAAA cis 96

25、5 728 909 0,3971% 0,0502 % 0,0142 %cAAA trans vinyl 909 728 965 0,2954 % 0,0075 % 0,0065 %cAAAISO12965:2000(E)3 7.10Determinethemicrostructureoftherubber,inpercent,usingthefollowingequations: vinyl 100 % c ccc cis cis cis trans vinyl 100 % c ccc trans trans cis trans vinyl vinyl vinyl 100 % c ccc ci

26、s trans Figure1SampleA(medium-cispolybutadiene)ISO12965:2000(E) 4 Figure2SampleB(high-cispolybutadiene) Figure3SampleC(low-cispolybutadiene)ISO12965:2000(E)5 8 Precision 8.1 Theprecisioncalculationstoexpressrepeatabilityandreproducibilitywereperformedinaccordancewith ISO/TR9272.Consultthisforprecisi

27、onconceptsandnomenclature. 8.2 Atype1interlaboratorytestprogrammewasorganizedin1994.Threepolybutadienematerials(A,BandC) withdifferentmicrostructures(seeFigures1,2and3)weresenttotheparticipatinglaboratorieswheretheywere analysedusingthetestprocedure. 8.3 Theprecisionresultsfortheciscontentaregivenin

28、Table1,theprecisionresultsforthetranscontentare giveninTable2,whileTable3showstheprecisionresultsforthevinylcontent. Foralldata,p=6,q=3andn=5. 8.4 Repeatabilityforciscontent:Therepeatabilityrfortheciscontentofpolybutadienehasbeenestablished as1,00percentagepoints.Twosingletestresults(ordetermination

29、s)thatdifferbymorethan1,00percentage pointsshallbeconsideredsuspectanddictatethatsomeappropriateinvestigativeactionbetaken. 8.5 Reproducibilityforciscontent:ThereproducibilityRfortheciscontentofpolybutadienehasbeen establishedas1,86percentagepoints.Twosingletestresults(ordeterminations),obtainedinse

30、parate laboratories,thatdifferbymorethan1,86percentagepointsshallbeconsideredsuspectanddictatethatsome appropriateinvestigativeactionbetaken. 8.6 Repeatabilityfortranscontent:Therepeatabilityrforthetranscontentofpolybutadienehasbeen establishedas0,72percentagepoints.Twosingletestresults(ordeterminat

31、ions)thatdifferbymorethan 0,72percentagepointsshallbeconsideredsuspectanddictatethatsomeappropriateinvestigativeactionbe taken. 8.7 Reproducibilityfortranscontent:ThereproducibilityRforthetranscontentofpolybutadienehasbeen establishedas0,94percentagepoints.Twosingletestresults(ordeterminations),obta

32、inedinseparate laboratories,thatdifferbymorethan0,94percentagepointsshallbeconsideredsuspectanddictatethatsome appropriateinvestigativeactionbetaken. 8.8 Repeatabilityforvinylcontent:Therepeatabilityrforthevinylcontentofpolybutadienehasbeen establishedas0,30percentagepoints.Twosingletestresults(orde

33、terminations)thatdifferbymorethan 0,30percentagepointsshallbeconsideredsuspectanddictatethatsomeappropriateinvestigativeactionbe taken. 8.9 Reproducibilityforvinylcontent:ThereproducibilityRforthevinylcontentofpolybutadienehasbeen establishedas0,64percentagepoints.Twosingletestresults(ordeterminatio

34、ns),obtainedinseparate laboratories,thatdifferbymorethan0,64percentagepointsshallbeconsideredsuspectanddictatethatsome appropriateinvestigativeactionbetaken.ISO12965:2000(E) 6 Table1Precisiondataforciscontent Meanlevel Withinlab Betweenlabs Sample % s r rr% s R RR% A 93,48 0,33 0,91 0,97 0,46 1,28 1

35、,37 B 97,52 0,22 0,61 0,63 0,84 2,33 2,39 C 39,94 0,49 1,36 3,41 0,66 1,83 4,58 Pooledoraveragevalues 76,98 0,36 1,00 1,30 0,67 1,86 2,42 where s r isthewithin-labstandarddeviation; s R isthebetween-labsstandarddeviation; r istherepeatabilityinmeasurementunits; r% istherepeatabilityinpercent; a R is

36、thereproducibilityinmeasurementsunits; R% isthereproducibilityinpercent. a a Thesevaluesrepresentpercentrelative,i.e.percentofapercent. Table2Precisiondatafortranscontent Meanlevel Withinlab Betweenlabs Sample % s r rr% s R RR% A 3,5 0,13 0,36 10,3 0,22 0,61 17,4 B 1,86 0,16 0,44 23,7 0,35 0,97 52,1

37、 C 50,2 0,4 1,11 2,21 0,42 1,16 2,31 Pooledoraveragevalues 18,52 0,26 0,72 3,89 0,34 0,94 5,08 where s r isthewithin-labstandarddeviation; s R isthebetween-labsstandarddeviation; r istherepeatabilityinmeasurementunits; r% istherepeatabilityinpercent; a R isthereproducibilityinmeasurementsunits; R% i

38、sthereproducibilityinpercent. a a Thesevaluesrepresentpercentrelative,i.e.percentofapercent.ISO12965:2000(E)7 Table3Precisiondataforvinylcontent Meanlevel Withinlab Betweenlabs Sample % s r rr% s R RR% A 3,05 0,10 0,28 9,18 0,31 0,86 28,2 B 0,35 0,11 0,30 85,7 0,19 0,53 151,4 C 9,62 0,13 0,36 3,74 0

39、,17 0,47 4,89 Pooledoraveragevalues 4,34 0,11 0,30 6,91 0,23 0,64 14,75 where s r isthewithin-labstandarddeviation; s R isthebetween-labsstandarddeviation; r istherepeatabilityinmeasurementunits; r% istherepeatabilityinpercent; a R isthereproducibilityinmeasurementsunits; R% isthereproducibilityinpe

40、rcent. a a Thesevaluesrepresentpercentrelative,i.e.percentofapercent. 9 Testreport Thetestreportshallincludethefollowinginformation: a) areferencetothisInternationalStandard; b) fullidentificationoftherubberanalysed; c) whetheranygelwaspresent(see7.2); d) theresultsoftheanalysis; e) detailsofanydevi

41、ationsfromthemethodspecified; f) thedateofthetest.BS ISO 12965:2000 BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

42、 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revis

43、ions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or amb

44、iguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribe

45、rs automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to su

46、pply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various

47、 BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the pur

48、chase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies.

49、 Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than i