BS ISO 13942-2003 Bonded abrasive products - Limit deviations and run-out tolerances《粘合磨料产品 极限偏差和跳动公差》.pdf

1、BRITISH STANDARD BS ISO 13942:2000 Bonded abrasive products Limit deviations and run-out tolerances ICS 25.100.70 BS ISO 13942:2000 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 8 September 2003 BSI 8 September 2003 ISBN 0 580 42576 2 Natio

2、nal foreword This British Standard reproduces verbatim ISO 13942:2000 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee MTE/13, Grinding wheels, abrasive tools, paper, cloths and powders, which has the responsibility to: A lis

3、t of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspon

4、dence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of i

5、tself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments an

6、d promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii to iv, pages 1 to 18, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amend

7、ments issued since publication Amd. No. Date CommentsReference number ISO 13942:2000(E) OSI 0002 INTERNATIONAL STANDARD ISO 13942 First edition 2000-12-15 Bonded abrasive products Limit deviations and run-out tolerances Produits abrasifs agglomrs carts limites et tolrances de battement BSISO13942:20

8、00ISO 24931:(0002)E DPF dlcsiremia ihTs PDF file mya ctnoain emdeddeb tyfepcaes. In acccnadroe with Aebods licnesign lopic,y this file may be pirntde ro ivwede tub slahl ton eb ideted lnuess teh tyfepacse which aer emdeddeb era licnesed to dna intslaled on teh computre freporming teh idetign. In wod

9、lnidaogn this f,eli trapies accept tniereh teh sersnoptilibiy of ton nifrgnigni Asebod licsnegni ilopcy. ehT ISO tneClar Secteraairt accepts no lilibaity ni this .aera Aebod is a tedarmakr fo Aebod Stsyems Icntaropro.de teDails fo the sfotwera pcudorts sude to crtaee tihs PFD file can be fdnuo in th

10、e Glarene Info leratiev to the fil;e the Pc-FDaertion arapmteres were tpoimizde for pirtning. Evyre cera sah neeb taken to enseru taht teh file is suitlbae fro sue by ISO memreb idob.se In teh lnuikley etnev ttah a plborem leratign to it is f,dnuo lpsaee ifnrom teh tneClar Sceterairat at the sserdda

11、 givne lebwo. ISO 0002 All rhgits rsevre.de elnUss towrehise scepfidei, on trap of tihs cilbuptanoi mya eb cudorperde ro utzilide ni yna form ro yb yna snaem, eelctinorc ro mecinahcal, inclidugn tohpociypong dna micrfoilm, wittuoh repmissino in writing form eitreh ISO at teh erddass lebwo ro ISOs me

12、mreb ydob in the ctnuoyr of the rtseuqee.r ISO cirypothg fofice saCe tsopale 65 1121-HC aveneG 20 leT. + 41 22 947 10 11 xaF + 14 22 947 90 74 E-mail cirypothgiso.ch eWb www.iso.ch ii ISO 0002 All irhgts seredevr BSISO13942:2000ISO 24931:(0002)E ISO 0002 All rights rsedevre iii Contents Page Forewor

13、d.iv 1 Scope 1 2 Normative references 1 3 Terms and definitions .2 4 Symbols and designations 4 5 Straight grinding wheels, recessed, relieved and hubbed wheels 5 5.1 Types involved.5 5.2 Straight grinding wheels for general applications.6 5.3 Straight grinding wheels for special applications8 5.4 G

14、rinding wheels for high-pressure grinding 10 5.5 Straight grinding wheels used in sets.11 5.6 Cemented or clamped cylinder wheels and disc wheels 11 6 Dish and cup wheels .13 6.1 Types involved.13 6.2 Dish and cup wheels for general applications .14 6.3 Dish and cup wheels for tool grinding 14 7 Gri

15、nding wheels for cutting-off, deburring and fettling/snagging14 7.1 Scope 14 7.2 Limit deviations T D of the outside diameter, axial run-out tolerance, T PL , and the radial run-out tolerance, T RL .15 7.3 Limit deviations T H of the hole diameter.16 7.4 Limit deviations T T and T U of the grinding

16、wheel thickness .16 8 Segments17 9 Cones and plugs with threaded insert 18 10 Honing stones and superfinishings.18 11 Hand finishing sticks.18 BSISO13942:2000ISO 24931:(0002)E iv ISO 0002 All rights rsedevre Foreword ISO (the International Organization for Standardization) is a worldwide federation

17、of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. I

18、nternational organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with

19、 the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to

20、 the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO 13942 was prepared by Technical Committee ISO/TC 29, Small tools, Subcommittee SC

21、 5, Grinding wheels and abrasives. BSISO13942:2000INTENRATIONAL TSANDADR ISO 24931:(0002)E ISO 0002 All rights rsedevre 1 Bonded abrasive products Limit deviations and run-out tolerances 1 Scope This International Standard specifies the essential limit deviations and run-out tolerances, in millimete

22、rs, for bonded abrasive products as specified in ISO 603-1 to ISO 603-16. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisi

23、ons of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normati

24、ve document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 286-1:1988, ISO system of limits and fits Part 1: Bases of tolerances, deviations and fits. ISO 286-2:1988, ISO system of limits and fits Part 2: Tables of standard tolerance gr

25、ades and limit deviations for holes and shafts. ISO 603-1, Bonded abrasive products Dimensions Part 1: Grinding wheels for external cylindrical grinding between centres. ISO 603-2, Bonded abrasive products Dimensions Part 2: Grinding wheels for centreless external cylindrical grinding. ISO 603-3, Bo

26、nded abrasive products Dimensions Part 3: Grinding wheels for internal cylindrical grinding. ISO 603-4, Bonded abrasive products Dimensions Part 4: Grinding wheels for surface grinding/peripheral grinding. ISO 603-5, Bonded abrasive products Dimensions Part 5: Grinding wheels for surface grinding/fa

27、ce grinding. ISO 603-6, Bonded abrasive products Dimensions Part 6: Grinding wheels for tool and tool room grinding. ISO 603-7, Bonded abrasive products Dimensions Part 7: Grinding wheels for manually guided grinding. ISO 603-8, Bonded abrasive products Dimensions Part 8: Grinding wheels for deburri

28、ng and fettling/snagging. ISO 603-9, Bonded abrasive products Dimensions Part 9: Grinding wheels for high-pressure grinding. ISO 603-10, Bonded abrasive products Dimensions Part 10: Stones for honing and superfinishings. ISO 603-11, Bonded abrasive products Dimensions Part 11: Hand finishing sticks.

29、 BSISO13942:2000ISO 24931:(0002)E 2 ISO 0002 All rights rsedevre ISO 603-12, Bonded abrasive products Dimensions Part 12: Grinding wheels for deburring and fettling on a straight grinder. ISO 603-13, Bonded abrasive products Dimensions Part 13: Grinding wheels for deburring and fettling on a vertica

30、l grinder. ISO 603-14, Bonded abrasive products Dimensions Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder. ISO 603-15, Bonded abrasive products Dimensions Part 15: Grinding wheels for cutting-off on stationary or mobile cutting-off machines. ISO 603-16, Bonded abras

31、ive products Dimensions Part 16: Grinding wheels for cutting-off on hand held power tools. 3 Terms and definitions For the purposes of this International Standard, the following terms and definitions apply. For further terms and definitions, see also ISO 286-1. It should be noted that some of the te

32、rms are defined in a more restricted sense than in common usage. 3.1 shaft external feature of a workpiece, including features which are not cylindrical 3.2 hole internal feature of a workpiece, including features which are not cylindrical 3.3 size number, expressing in a particular unit, the numeri

33、cal value of a linear dimension 3.3.1 basic size nominal size size from which the limits of size are derived by the application of the upper and lower deviations NOTE The basic size can be a whole number or a decimal number, e.g. 32; 15; 8,75; 0,5 etc. 3.3.2 actual size size of a feature, obtained b

34、y measurements 3.3.3 limits of size the two extreme permissible sizes of a feature, between which the actual size should lie, the limits of size being included 3.3.3.1 maximum limit of size greatest permissible size of a feature 3.3.3.2 minimum limit of size smallest permissible size of a feature BS

35、ISO13942:2000ISO 24931:(0002)E ISO 0002 All rights rsedevre 3 3.4 deviation algebraic difference between a size (actual size, limit of size, etc.) and the corresponding basic size NOTE Symbols for shaft deviations are lower case letters (es, ei) and symbols for hole deviations are upper case letters

36、 (ES, EI). 3.4.1 limit deviations upper deviation and lower deviation 3.4.1.1 upper deviation ES, es algebraic difference between the maximum limit of size and the corresponding basic size 3.4.1.2 lower deviation EI, ei algebraic difference between the minimum limit of size and the corresponding bas

37、ic size 3.5 size tolerance difference between the maximum limit of size and the minimum limit of size, i.e. the difference between the upper deviation and the lower deviation NOTE The tolerance is an absolute value without sign. BSISO13942:2000ISO 24931:(0002)E 4 ISO 0002 All rights rsedevre 4 Symbo

38、ls and designations See Table 1. Table 1 Symbols and designations Symbol of dimension Designation Symbol of limit deviation A Smallest width of a trapezoidal segment T A B Width of a segment, stick or stone T B C Thickness of a segment, stick or stone T C D Outside diameter of abrasive products T D

39、E Thickness at bore of cup, dish, recessed and relieved wheels T E F Depth of the 1st recess G Depth of the 2nd recess H Abrasive product bore diameter, thread diameter of wheels with threaded insert T H H 1 Diameter of counterbore T H1 J Smallest diameter of taper cup wheel, dish wheels, tapered an

40、d hubbed wheels K Internal diameter of recess of taper cup wheel and dish wheels T K L Length of segments, length of thread bore of wheels with threaded insert, sticks and stones T L N Depth of the relief P Recessed diameter R Radius of recessed grinding wheels, segments, cones and plugs T R T Overa

41、ll thickness T T U Smallest thickness of tapered, hubbed and depressed centre wheels, e.g. in Type 4 or Type 38 T U W Rim width of cups, cylinders and dishes T W Axial run-out tolerance T PL Radial run-out tolerance T RL BSISO13942:2000ISO 24931:(0002)E ISO 0002 All rights rsedevre 5 5 Straight grin

42、ding wheels, recessed, relieved and hubbed wheels 5.1 Types involved Types 1, 3, 4, 5, 7, 20 to 26, 38 and 39. See Figures 1 to 5. Type 1 Figure 1 Straight grinding wheel, e.g. as specified in ISO 603-1 Type 5 Figure 2 Grinding wheel recessed on one side, e.g. as specified in ISO 603-1 Type 7 Figure

43、 3 Grinding wheel recessed on both sides, e.g. as specified in ISO 603-1 Type 38 Figure 4 Hubbed wheel, e.g. as specified in ISO 603-1 BSISO13942:2000ISO 24931:(0002)E 6 ISO 0002 All rights rsedevre Type 39 Figure 5 Double hubbed wheel, e.g. as specified in ISO 603-1 5.2 Straight grinding wheels for

44、 general applications 5.2.1 Limit deviations T D of the outside diameter, axial run-out tolerance T PL and radial run-out tolerances, T RL The limit deviations of the outside diameter, the axial run-out tolerances, T PL and the radial run-out tolerances, T RL as specified in Table 2 apply to the res

45、pective range of diameters D. Table 2 Limit deviations for outside diameters and run-out tolerances D T D T PL T RL 3u Du 8 0,5 0,3 8 Du 20 0,8 0,2 0,3 20 Du 50 1,2 0,2 0,3 50 Du 125 2 0,2 0,4 125 Du 300 3,2 0,3 0,5 300 Du 762 5 0,3 0,6 762 Du20 00 80 , 40 , 8 5.2.2 Limit deviations T H of the hole

46、diameter The limit deviations of the hole diameters H 30 mm correspond to the tolerance class H11 as specified in ISO 286-2:1988, Table 6. For hole diameters H 30 mm, the limit deviations are larger than H11 for technical reasons of manufacture. The limit deviations of hole diameters are given in Ta

47、ble 3. BSISO13942:2000ISO 24931:(0002)E ISO 0002 All rights rsedevre 7 Table 3 Limit deviations for hole diameters HT H 1,6u Hu 50 0,16 0 50 Hu 80 0,19 0 80 Hu 180 0,25 0 180 Hu 250 0,29 0 250 Hu 315 0,32 0 315 Hu 400 0,36 0 400 Hu 500 0,4 0 500 H 0,44 0 5.2.3 Limit deviations T P of the recess diam

48、eter and assignment of radii R The limit deviations T P of the recess diameter as specified in Table 4 apply to the respective range of diameters P. The values for the radii R in the recess are a function of the recess diameter P and are maximum dimensions. Table 4 Limit deviations for recess diameters and recess radii P T P R max. 3,2u Pu 8 0,8 0 0,8 8 Pu 20 1, 2 0 1,2 20 Pu 50 2 0 2 50 Pu 125 3,2 0 3,2 125 Pu 315 5 0 5 315 Pu 900 8 0 8 BSISO13942:2000ISO 24931:(0002)E 8 ISO 0002 All rights rsedevre 5.2.4 Limit deviations of T T and of the grin