BS ISO 14617-3-2004 Graphical symbols for diagrams - Connections and related devices《图示的图形符号 连接和相关设备》.pdf

1、BRITISH STANDARD BS ISO 14617-3:2002 Graphical symbols for diagrams Part 3: Connections and related devices ICS 01.080.30 BS ISO 14617-3:2002 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2004 BSI 31 August 2004 ISBN 0 580 44369 8

2、 National foreword This British Standard reproduces verbatim ISO 14617-3:2002 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee TDW/4, Technical product specification, which has the responsibility to: A list of organizations r

3、epresented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by

4、using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunit

5、y from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in

6、 the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii to v, a blank page, pages 1 to 15 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publicatio

7、n Amd. No. Date Comments Reference number ISO 14617-3:2002(E)INTERNATIONAL STANDARD ISO 14617-3 First edition 2002-09-01 Graphical symbols for diagrams Part 3: Connections and related devices Symboles graphiques pour schmas Partie 3: Connexions et dispositifs associs BSISO146173:2002ii BSISO146173:2

8、002IS-71641 O3:(2002E) iiiContents Page Foreword iv Introduction. v 1 Scope 1 2 Normative references 1 3 Terms and definitions. 1 4 Connections. 4 5 Connection joints and pipeline ends 7 6 Connection joints, junctions, and related devices of specified design 9 7 Fittings 10 8 Ports ISO , quick-relea

9、se couplings, and connectors 11 9 Additional simplifications. 12 Bibliography 15 BSISO146173:2002IS-71641 O3:(2002E) iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International St

10、andards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also

11、 take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. The main task of technical committee

12、s is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possib

13、ility that some of the elements of this part of ISO 14617 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 14617-3 was prepared by Technical Committee ISO/TC 10, Technical product documentation, Subcommittee SC 10, Process plan

14、t documentation and tpd-symbols. ISO 14617 consists of the following parts, under the general title Graphical symbols for diagrams: Part 1: General information and indexes Part 2: Symbols having general application Part 3: Connections and related devices Part 4: Actuators and related devices Part 5:

15、 Measurement and control devices Part 6: Measurement and control functions Part 7: Basic mechanical components Part 8: Valves and dampers Part 9: Pumps, compressors and fans Part 10: Fluid power converters Part 11: Devices for heat transfer and heat engines Part 12: Devices for separating, purificat

16、ion and mixing Part 15: Installation diagrams and network maps Other parts are under preparation. BSISO146173:2002IS-71641 O3:(2002E) vIntroduction The purpose of ISO 14617 in its final form is the creation of a library of harmonized graphical symbols for diagrams used in technical applications. Thi

17、s work has been, and will be, performed in close cooperation between ISO and IEC. The ultimate result is intended to be published as a standard common to ISO and IEC, which their technical committees responsible for specific application fields can use in preparing International Standards and manuals

18、. BSISO146173:2002BSISO146173:2002INTENRATIONAL TSANDADR IS-71641 O3:(2002E)1Graphical symbols for diagrams Part 3: Connections and related devices 1 Scope This part of ISO 14617 specifies graphical symbols for functional connections, mechanical links, pipelines and related devices such as connectio

19、n joints, ISO ports, terminals, quick-release couplings and connectors, in diagrams. For the fundamental rules of creation and application of graphical symbols in diagrams, see ISO 81714-1. For an overview of ISO 14617, information on the creation and use of registration numbers for identifying grap

20、hical symbols used in diagrams, rules for the presentation and application of these symbols, and examples of their use and application, see ISO 14617-1. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this pa

21、rt of ISO 14617. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of ISO 14617 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indic

22、ated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 2553, Welded, brazed and soldered joints Symbolic representation on drawings ISO 4063, Welding and allied pr

23、ocesses Nomenclature of processes and reference numbers ISO 14617-1:2002, Graphical symbols for diagrams Part 1: General information and indexes ISO 81714-1:1999, Design of graphical symbols for use in the technical documentation of products Part 1: Basic rules 3 Terms and definitions For the purpos

24、es of this part of ISO 14617, the following terms and definitions apply. NOTE 1 The list has been restricted to terms whose meaning is not obvious and which have not been defined elsewhere in an International Standard, or which have been defined in various ways in different standards. In preparing t

25、hese definitions, ISO and IEC standards on terminology have been consulted; see the references in parentheses. However, most of the definitions in those standards were prepared by different technical committees within a restricted scope. This means that many terms so defined have to be given more ge

26、neral or neutral definitions when applied in the context of graphical symbols. NOTE 2 In those cases where the same term has substantially different meanings in ISO and IEC, this is indicated beside the term by ISO or IEC and elsewhere in this part of ISO 14617 by a superscript, for example “port IS

27、O ”. BSISO146173:2002IS-71641 O3:(2002E) 2 3.1 connection general term for functional connection, mechanical link, pipeline, electric conductor, etc. 3.2 functional connection connection between functions NOTE A functional connection is used to represent the interrelations between functions represen

28、ted, for example, by symbols according to ISO 14617-6. 3.3 electric connection conductor or circuit for joining terminals or other conductors IEC 60050-151, IEC 60050-531, IEC 60050-581 3.4 connection ISO threaded port, flange, or similar means for connecting a pipeline to a component ISO 5598 c.f.

29、port (3.13) and terminal. 3.5 internal connection connection in the form of one or more pipelines or conductors that is an integral part of a component NOTE An internal connection need not be located inside a component. 3.6 line ISO abbreviation of the term “pipeline” 3.7 line IEC multi-pole or mult

30、i-phase electric connection EXAMPLE Power line, telecommunication line, transmission line. 3.8 cable insulated conductor or several insulated conductors with a common covering 3.9 pipe unit pipeline or, more often, several pipelines in a common covering pipe with insulation 3.10 information bus bus

31、with conductors conveying information 3.11 unidirectional having the property to move, transmit, etc. in one direction only BSISO146173:2002IS-71641 O3:(2002E) 33.12 bidirectional having the property to move, transmit, etc. in two alternative, opposite directions ISO 5598 3.13 port ISO terminus of a

32、 fluid passage in a component to which can be connected pipelines for the transmission of fluid to or from the component ISO 5598 cf. connection (3.4) and terminal. 3.14 connector component which terminates conductors, flexible pipes, or hoses in order to provide connection and disconnection to a ma

33、ting component IEC 60050-441, IEC 60050-581 cf. connector pair (3.16). 3.15 quick-release coupling connection (3.4) which may be joined or separated without the use of tools ISO 5598 3.16 connector pair combination of mating connectors IEC 60050-581 3.17 bundle group of conductors or pipelines that

34、mainly follow the same path NOTE The bundle may be a real (product) bundle or a line on a diagram representing a number of conductors or pipelines (single-line representation) even if these do not form a real bundle. 3.18 single-line representation representation where two or more connections or com

35、ponents are represented by a single symbol IEC 61082-1 BSISO146173:2002IS-71641 O3:(2002E) 4 4 Connections 4.1 Symbols of a basic nature NOTE For the application of the symbols, see R401 (4.2.1) and R402 (4.2.2). 4.1.1 401 Functional connection 4.1.2 402 Form 1 Mechanical link, shaft 4.1.3 403 Form

36、2 Mechanical link, shaft, wire 4.1.4 404 Electrically insulating mechanical link, shaft, wire See R403 (4.2.3). 4.1.5 405 Pipeline, duct 4.1.6 406 Group of pipelines, ducts in single-line representation 4.1.7 411 Non-guided electromagnetic beam 4.1.8 412 Planned pipeline, duct 4.1.9 413 Group of pla

37、nned pipelines, ducts in single-line representation 4.1.10 422 Pilot (control), drain, purge, or bleed line in fluid power systems 4.2 Application rules for the symbols in 4.1 4.2.1 R401 Symbols for connections may cross each other. For an example, see X401 (4.5.1). 4.2.2 R402 When confusion between

38、 symbols 401 (4.1.1) and 405 (4.1.5) or 406 (4.1.6) is likely, symbols giving supplementary information according to clause 4.3 shall be used. For an example, see X401 (4.5.1). 4.2.3 R403 In simplified representation, the symbol may also represent any type of linkage system between an actuator and t

39、he affected item, for example, a combination of mechanical links and hydraulic pipelines. For an example, see X405 (4.5.5). 4.3 Symbols giving supplementary information 4.3.1 431 Pure functional type 4.3.2 432 Capillary type 4.3.3 433 Pneumatic type 4.3.4 434 Hydraulic type 4.3.5 435 Electric type B

40、SISO146173:2002IS-71641 O3:(2002E) 54.3.6 442 Unidirectional information bus type 4.3.7 443 Bidirectional information bus type 4.3.8 444 Form 1 4.3.9 452 Form 2 Flexible type For form 1, see R412 (4.4.1). 4.3.10 445 Circular shape 4.3.11 446 Rectangular shape 4.3.12 447 Ridged shape 4.3.13 448 Twist

41、ed pipeline or duct 4.3.14 449 Cable, pipe unit See R412 (4.4.1). 4.3.15 450 Twisting of pipelines See R412 (4.4.1). 4.3.16 451 Internal connection See R413 (4.4.2). 4.4 Application rules for the symbols in 4.3 4.4.1 R412 The symbol may instead be located beside the line or lines, provided with a le

42、ader line terminated by an arrowhead. For examples, see X411 (4.5.11) to X413 (4.5.13), X421 (4.5.14) and X422 (4.5.15). 4.4.2 R413 The symbol shall be used when it is necessary to indicate that a certain connection is internal, i.e. an integral part of the component or device represented. The symbo

43、l shall be placed at both ends of the internal connection or, with a short connecting line, between the two ends. If the internal connection is also connected to a terminal or port ISO , the symbol may be omitted, provided that the terminal or port ISOis represented by symbol 561 (8.1.1) or indicate

44、d by a terminal designation. In diagrams for fluid power systems, an internal connection may instead be indicated by bending at least one of the ends of the connecting line by 45 to 60. For an example, see X435 (4.5.18). BSISO146173:2002IS-71641 O3:(2002E) 6 4.5 Application examples 4.5.1 X401 401,

45、402, 405, 431 Crossing of symbols for connections A functional connection, a mechanical link and a pipeline is shown. 4.5.2 X402 402, 444 4.5.3 X403 403, 444 Flexible mechanical link 4.5.4 X404 404, 444 Flexible, electrically insulating mechanical link, shaft 4.5.5 X405 404, IEC, IEC Electropneumati

46、cally operated contactor, simplified representation Explanation: 4.5.6 X406 405, 446, 448 Twisted rectangular pipeline 4.5.7 X322 325, 405 Pipeline or duct with thermal insulation 4.5.8 X408 325, 405 Pipeline with thermal insulation, heated or cooled by a separate circuit 4.5.9 X409 301, 405 Jackete

47、d (sleeved) pipeline 4.5.10 X410 301, 325, 405 Jacketed (sleeved) pipeline with thermal insulation BSISO146173:2002IS-71641 O3:(2002E) 74.5.11 X411 405, 444 4.5.12 X412 405, 444 Flexible pipeline, hose Two methods are shown. 4.5.13 X413 405, 444 Four pipelines, two of flexible type 4.5.14 X421 405,

48、449 Four pipelines forming a unit 4.5.15 X422 405, 449 Four pipelines, two forming a unit 4.5.16 X431 343, 406 4.5.17 X432 344, 406 Three pipelines in single-line representation Two methods are shown. 4.5.18 X435 201, 242, 422, 2002, 2161, 2171 Internal pilot (control) connection in a pressure relie

49、f valve 5 Connection joints and pipeline ends 5.1 Symbols of a basic nature 5.1.1 501 200 % Joint of connections (functional connections, mechanical links, pipelines, ducts, etc.) See R501 (5.2.1). 5.1.2 2005 Joint of two mechanical parts permitting motion of the parts in two or more dimensions, for example, a cardan joint BSISO146173:2002IS-71641 O3:(2002E) 8 5.1.3 503 Closed end of pipeline or duct 5.2 A