BS ISO 14621-2-2004 Space systems - Electrical electronic and electromechanical (EEE) parts - Control programme requirements《航天系统 电气、电子和机电部件 控制程序要求》.pdf

1、BRITISH STANDARD AEROSPACE SERIES BS ISO 14621-2:2003 Space systems Electrical, electronic and electromechanical (EEE) parts Part 2: Control programme requirements ICS 49.140 BS ISO 14621-2:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee on

2、 5 February 2004 BSI 5 February 2004 ISBN 0 580 43356 0 National foreword This British Standard reproduces verbatim ISO 14621-2:2003 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee ACE/68, Space systems and operations, which

3、 has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “

4、International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with

5、 a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related internati

6、onal and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover an inside front cover, the ISO title page, pages ii and iii, a blank page, pages 1 to 6 an inside back cover and a back cover. The BSI copyright notice displayed in this document indi

7、cates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsINTERNATIONAL STANDARD ISO 14621-2 First edition 2003-07-15 Reference number ISO 14621-2:2003(E) OSI 2003 Space systems Electrical, electronic and electromechanical (EEE) parts Part 2: Control programm

8、e requirements Systmes spatiaux Composants lectriques, lectroniques et lectromcaniques (EEE) Partie 2: Exigences du programme de contrleBSISO146212:2003ISO -12641:2)E(3002 ii ISO 3002 All rithgs reresvde id FDPscalimer ThFDP si fam eliy ctnome niat deddebyepfa.sec In cacnadrociw eth sebodA sneciliyc

9、ilop gn, thf siam elirp eb ytnide or viewb detu llahs ton tide ebed lnuet sst ehyfepcaa hcihw serdebme et desnecil era dedo tsni dnat no dellahpmoc eturep reformign ttide ehign. In odt gnidaolnwsih liferap ,tcca seitpe trehnie snopser ehtitiliby fo nto fnirA gnigniycilop gnisnecil sebod. Teh SItneC

10、Olar Seerctraiat catpecs ibail ontily t nih.aera si Aebod t a sirramedak fo AsyS ebodtmeI snocrropta.de teDlias fo tfos ehtwcudorp erats t desutaerc ot esih FDP fb nac elif et ni dnuoG ehreneI lafnr oleative tt of eh;eli tP ehDF-rctaenoi temaraptpo erew sremizif deorp rinti.gn Evrey t neeb sah eraca

11、kt neo rusnee ttah tf ehtius si elibaf elosu re by ISO memdob rebsei. In eht kilnuyle evtne ttah a borplme rtaleit gno it si f,dnuo esaelp ifnrom thtneC erla ceSrteraita ta teh sserdda vigoleb new. IOS 3002 Alr lithgs reresv.de sselnU toesiwreh sficep,dei rap ont fo thbup silitaciam nocudorper eb yd

12、e or tuilidez na nif yorm ro by nam ysnae, tcelerm ro cinocinahcela, tohp gnidulcnicopom dna gniyicrfomli, tiwuoht repsimsi noin wrtif gnirtie mohI reSO ta the asserdd ebwol or ISOmem sreb obyd t nitnuoc ehry fo teh euqertsre. SIc Oopyrigho tfifce saCsop etela 65 -HCG 1121eneva 02 T.le 22 14 + 10 94

13、7 11 Fxa + 22 14 0 94774 9 Eam-il ocpyrithgios.ogr Web wwwi.soo.rg BSISO146212:2003OSI -126413002:2)E( ISO 3002 r llAithgs reservde iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing

14、International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaiso

15、n with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of tec

16、hnical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is dra

17、wn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 14621-2 was prepared by Technical Committee ISO/TC 20, Aircraft and space vehicles, Subcommittee SC 14, Space sys

18、tems and operations. ISO 14621 consists of the following parts, under the general title Space systems Electrical, electronic and electromechanical (EEE) parts: Part 1: Parts management Part 2: Control programme requirements BSISO146212:2003. vi BSISO146212:2003ANRETNIITOTS LANDNADRA OSI -126413002:2

19、)E( ISO 3002 r llAithgs reservde 1 Space systems Electrical, electronic and electromechanical (EEE) parts Part 2: Control programme requirements 1S c o p e This part of ISO 14621 establishes technical guidelines for developing and documenting an electrical, electronic and electromechanical (EEE) par

20、ts control program, in order to assure that the parts used in the flight hardware are acceptable and possess adequate functional, radiation and reliability characteristics to meet the system requirements. These guidelines are tailorable to the needs of each individual programme based on the project

21、performance criteria, risk tolerance, budget, mission duration, environment, schedule and other considerations. This part of ISO 14621 is applicable to all customers and suppliers furnishing flight hardware and is suitable for reference in proposal instructions. 2 Normative references The following

22、referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 14300-1, Space systems Programme management Part 1: Structu

23、ring of a programme ISO 14300-2, Space systems Programme management Part 2: Product assurance ISO 14621-1: 1) , Space systems Electrical, electronic and electromechanical (EEE) parts Part 1: Parts management ISO 17666, Space systems Risk management 3 Terms and definitions For the purposes of this do

24、cument, the following terms and definitions apply. 3.1 customer organization or person that receives a product ISO 9000:2000 3.2 manufacturer company or organization that transforms raw material into a product EXAMPLE EEE parts manufacturer. 1) To be published. BSISO146212:20031ISO -12641:2)E(3002 2

25、 ISO 3002 All rithgs reresvde 3.3 part device that performs an electrical, electronic, or electromechanical (EEE) function and consists of one or more elements so joined together that they cannot normally be disassembled without destroying the functionality of the device 3.4 procurement responsible

26、party accountable for the process of procuring an EEE part EXAMPLE Customer, supplier, or independent procurement agent. 3.5 service company organization that provides services related to EEE parts EXAMPLE Distributor, screening laboratories or DPA laboratories. 3.6 supplier organization or person t

27、hat provides a product ISO 9000:2000 4 Abbreviated terms CID Commercial item description DPA Destructive physical analysis EEE Electrical, electronic and electromechanical LAT Lot acceptance testing MRB Material review board PPL Preferred parts list QCI Quality conformance inspection RHA Radiation h

28、ardness assurance RVT Radiation verification testing TCI Technology conformance inspection 5 Requirements 5.1 General Technical guidelines for parts control programme tasks, applied throughout all phases of flight hardware development, manufacturing and logistic support, are described in the followi

29、ng clauses. The customer and suppliers may include additional tasks not described below, and exclude tasks described herein based on other factors such as project design implementation, and the projects risk tolerance, in order to institute the most effective parts control programme for the space sy

30、stem. The customer should reference this part of ISO 14621 in the request for proposal or statement of work and should identify any additional tasks, deletions, or other special requirements with regard to parts. The supplier BSISO146212:20032OSI -126413002:2)E( ISO 3002 r llAithgs reservde 3 shall

31、implement a parts control programme covering each of the subjects in 5.2 to 5.20 and any additional tasks included in the request for proposal or statement of work. If any of these tasks are excluded, they should be so identified. 5.2 Organization The space hardware supplier shall identify the organ

32、ization responsible for managing its parts control programme and describe the organizations approaches, skills, and authority to implement, manage, and control the parts control programme efficiently, including reporting, as specified in ISO 14300-1. 5.3 Parts selection and standardization The space

33、 hardware supplier shall have an EEE parts selection and standardization process and implementation plan, which will allow it to meet the cost, schedule, operating, stability, environmental, radiation, material, safety, quality and reliability requirements defined for the related space programme, as

34、 described in ISO 14300-1 and ISO 14300-2. The space hardware supplier shall describe the process for selection and standardization of the parts as defined in ISO 14621-1. This includes the approach for technology insertion and the methodology and rationale for selection of parts manufacturers and s

35、ervice companies. The space hardware supplier shall optimize the use of previously qualified or approved parts for equivalent applications, thereby restricting the number of different part types, encouraging standardization and reducing life cycle costs and risk of obsolescence. The supplier is reco

36、mmended to have a preferred parts list (PPL), a parts usage list or an equivalent approved parts list which includes parts suitable from the viewpoint of quality assurance, cost availability, usage history, new and current technology, and data to support their space radiation sensitivity. 5.4 Parts

37、evaluation and characterization The space hardware supplier shall define the process to be implemented for the evaluation and characterization of the EEE parts. Where adequate assessment data does not already exist, the space hardware supplier shall define and describe how it will verify the capabil

38、ity of each selected part type to meet the mission requirements, in accordance with ISO 14621-1. The manufacturer or service company used by the space hardware supplier shall be capable of demonstrating that they meet the performance requirements and expectations of the programme. This includes a de

39、scription of the configuration controls that ensure that the parts used for space hardware are equivalent in form, fit, function and performance to the evaluated parts. 5.5 Parts requiring specific authorization Prior to incorporating EEE parts into any space hardware, the supplier shall develop a r

40、isk management plan (see 5.18) for EEE parts requiring specific authorization or restriction for reasons such as limited-life, limited useful shelf life, instability, operation outside temperature range, or other reliability risks. The supplier shall address the methodology used for custom and in-ho

41、use developed parts. These parts shall be subjected to the same evaluation criteria as all other parts. 5.6 Radiation hardness assurance programme The space hardware supplier shall define the development and implementation of a EEE parts radiation hardness assurance (RHA) programme addressing all ap

42、plicable phases of the programme emphasizing the early development phase, such as system design radiation impact analysis, technical parts review, RHA test programme design, radiation evaluation testing and RHA impact reporting. BSISO146212:20033ISO -12641:2)E(3002 4 ISO 3002 All rithgs reresvde The

43、 space hardware supplier shall document how the part types shall be reviewed to establish their sensitivity to all radiation effects, the manner in which these effects are determined, whether there is a necessity for system mitigation techniques and, if so, how they will be implemented. 5.7 Parts de

44、rating The space hardware supplier shall document a process for derating all EEE parts, for all factors that degrade performance in order that the parts are capable of meeting probability of mission success and mission life requirements. Furthermore, the space hardware supplier shall verify derating

45、 conformance by analysis or test (parts stress analysis) in accordance with ISO 14621-1. 5.8 Parts approval process The space hardware supplier shall document the process for approval of each part before installation into space hardware and provide access to the part selection process, including ris

46、k assessment, before design acceptance sign-off, in accordance with the delegation level defined by the customer. 5.9 Parts procurement documents The space hardware supplier shall describe the process for originating the necessary procurement specifications and using existing specifications, such as

47、 controlled specifications, drawings, CIDs, or standard manufacturer part numbers for the procurement of parts. 5.10 Parts screening The space hardware supplier shall describe how all parts used in space hardware are to be screened to the extent appropriate for the space programme. The screening tes

48、t requirements shall be designed so that accumulated stresses do not jeopardize parts reliability. The relevant screening process shall be defined by the supplier and shall be available as input to the reliability programme. 5.11 Lot acceptance test (LAT)/quality conformance inspection (QCI)/technol

49、ogy conformance inspection (TCI) Based on the available technical performance and parts manufacturers test data, the procurement responsible shall apply the LAT/QCI/TCI rules defined by the space hardware supplier and, when necessary, shall select the appropriate level of LAT/QCI/TCI, in accordance with the space hardware suppliers requirements, to demonstrate that each lot is in accordance with the technical and