BS ISO 15397-2014 Graphic technology Communication of graphic paper properties《印刷技术 图纸属性传播》.pdf

1、BSI Standards PublicationBS ISO 15397:2014Graphic technology Communication of graphicpaper propertiesCopyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS ISO 15397:2014

2、 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 15397:2014.The UK participation in its preparation was entrusted to TechnicalCommittee PAI/43, Graphic technology.A list of organizations represented on this committee can beobtained on request to its secretary.T

3、his publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 76644 2ICS 37.100.20Compliance with a British Standard cannot confer i

4、mmunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 28 February 2014.Amendments issued since publicationDate Text affectedCopyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled C

5、opy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS ISO 15397:2014 ISO 2014Graphic technology Communication of graphic paper propertiesTechnologie graphique Communication des proprits des papiers graphiquesINTERNATIONAL STANDARDISO15397First edition2014-02-01Ref

6、erence numberISO 15397:2014(E)Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS ISO 15397:2014ISO 15397:2014(E)ii ISO 2014 All rights reservedCOPYRIGHT PROTECTED DOC

7、UMENT ISO 2014All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission ca

8、n be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.orgWeb www.iso.orgPublished in SwitzerlandCopyright British Standards Institutio

9、n Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS ISO 15397:2014ISO 15397:2014(E) ISO 2014 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope . 12 Normative references 13 Terms and defi

10、nitions . 24 List of required criteria for communication of paper properties . 55 ISO standards related to required criteria 65.1 Sampling and general information useful for technical communication .65.2 Brand name and paper mill . 65.3 Grammage . 75.4 Bulk and/or thickness 75.5 Roughness for evalua

11、tion of surface properties 75.6 Gloss . 75.7 Opacity . 85.8 Brightness and whiteness of unprinted paper 85.9 Colour measurement of paper white point in printing conditions (D50/2) . 95.10 Colour measurement of unprinted paper in outdoor conditions (D65/10) 105.11 Supported colour gamut in the contex

12、t of prepress design 105.12 Fluorescence in the context of prepress 105.13 Storage conditions, influence of aging and testing conditions for proofing substrates 115.14 Bending resistance (bending stiffness) for Sheet-Fed Offset printing substrates .11Bibliography .12Copyright British Standards Insti

13、tution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS ISO 15397:2014ISO 15397:2014(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodi

14、es (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations

15、, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further m

16、aintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This International Standard was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org

17、/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be i

18、n the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions re

19、lated to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 130, Graphic technology.iv ISO 2014 All rights r

20、eservedCopyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS ISO 15397:2014ISO 15397:2014(E)IntroductionThis International Standard is intended to improve communication

21、between the graphic papermaking industry and the printing industry based on their need to be able to produce quality printing. Paper properties and their measurement are presented and their use in the printing context is described.This International Standard describes data to be provided for reliabl

22、e printing. A substrate description can be assessed to be in conformance with this International Standard, not a substrate itself.Printing press settings depend on paper grade, and several paper properties are required in order to define a grade.Paper measurement standards developed within ISO/TC 6

23、are referenced in this International Standard. They were mainly used to develop paper industry test methods and allow the papermaking processes to be reproducible and reliable within paper mills. It is advisable that paper purchasing specifications be based on paper industry standards. This recommen

24、dation also applies to paper proofing substrates. Special requirements for paper substrates for the reliable production of printed products need to be communicated on the basis of standards developed by ISO/TC 6 whenever possible.The evaluation of colour of the unprinted paper is critical to define

25、prepress white point settings. This measurement can be performed with either diffuse:0 integrating sphere instruments (papermakers equipment) or 45:0 instruments (printers equipment). Results are often close if the UV calibration is performed correctly. This International Standard specifies 45:0 ins

26、truments (printers equipment) to perform this evaluation as per ISO 13655, because of their wide availability at printers facilities.For the evaluation of printed colours, measurement devices are developed according to ISO 13655 which differ from the colour measurement devices which conform to ISO 2

27、469 and ISO 5631-1, ISO 5631-2 and ISO 5631-3. The latter type of instrument is used within paper mills for quality evaluation during paper manufacturing and unprinted paper colour evaluation.Properties linked to the printing process (e.g. dimensions, blistering and picking resistance in offset, mis

28、sing dots in gravure) are not described in this International Standard, since they are implicitly needed when purchasing the paper meant for this printing process.Properties that are not based on ISO standards are not described here.The bibliography lists basic references in graphic technology stand

29、ards,12Paper and board standards,3previously published references,4commercial classifications,5conditions of sale,6and reference lists of printing characterization data publicly available.8 ISO 2014 All rights reserved vCopyright British Standards Institution Provided by IHS under license with BSI -

30、 Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS ISO 15397:2014Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,

31、-BS ISO 15397:2014Graphic technology Communication of graphic paper properties1 ScopeThis International Standard specifies the list of relevant properties of paper substrates to be communicated between the paper and printing industries.This International Standard is applicable to papers intended to

32、be printed in rotogravure, cold-set web offset, heat-set web offset, sheet-fed offset, and flexographic printing processes and to proofing substrates.Where multiple methods exist, the preferred procedure and its International Standard are specified.All methods for measuring of properties specified i

33、n this International Standard are described in other ISO Standards.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references,

34、the latest edition of the referenced document (including any amendments) applies.ISO 187, Paper, board and pulps Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samplesISO 534, Paper and board Determination of thickness, density and sp

35、ecific volumeISO 536, Paper and board Determination of grammageISO 2470-1, Paper, board and pulps Measurement of diffuse blue reflectance factor Part 1: Indoor daylight conditions (ISO brightness)ISO 2470-2, Paper, board and pulps Measurement of diffuse blue reflectance factor Part 2: Outdoor daylig

36、ht conditions (D65 brightness)ISO 2471, Paper and board Determination of opacity (paper backing) Diffuse reflectance methodISO 2493-1, Paper and board Determination of bending resistance Part 1: Constant rate of deflectionISO 2813, Paints and varnishes Determination of specular gloss of non-metallic

37、 paint films at 20 degrees, 60 degrees and 85 degreesISO 5627, Paper and board Determination of smoothness (Bekk method)ISO 5631-2, Paper and board Determination of colour by diffuse reflectance Part 2: Outdoor daylight conditions (D65/10 degrees)ISO 8254-1, Paper and board Measurement of specular g

38、loss Part 1: 75 degree gloss with a converging beam, TAPPI methodISO 8254-2, Paper and board Measurement of specular gloss Part 2: 75 degree gloss with a parallel beam, DIN methodISO 8254-3, Paper and board Measurement of specular gloss Part 3: 20 degree gloss with a converging beam, TAPPI methodINT

39、ERNATIONAL STANDARD ISO 15397:2014(E) ISO 2014 All rights reserved 1Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS ISO 15397:2014ISO 15397:2014(E)ISO 8791-2, Pape

40、r and board Determination of roughness/smoothness (air leak methods) Part 2: Bendtsen methodISO 8791-4, Paper and board Determination of roughness/smoothness (air leak methods) Part 4: Print-surf methodISO 11475, Paper and board Determination of CIE whiteness, D65/10 degrees (outdoor daylight)ISO 11

41、476, Paper and board Determination of CIE whiteness, C/2 degrees (indoor illumination conditions)ISO 12647-7, Graphic technology Process control for the production of half-tone colour separations, proof and production prints Part 7: Proofing processes working directly from digital dataISO 13655, Gra

42、phic technology Spectral measurement and colorimetric computation for graphic arts images3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.3.1grammagebasis weightmass of a unit paper area, expressed in grams per square metreSOURCE: ISO 536:2012, 3.1,

43、 modified3.2single sheet thicknessdistance between one surface of a paper and the other, measured under an applied static loadNote 1 to entry: This term is most commonly used for paper thickness.SOURCE: ISO 534:2011, 3.1, modified3.3bulking thicknessthickness of a single sheet of paper, calculated f

44、rom the thickness of several superimposed sheets in a pack, and measured under an applied static loadSOURCE: ISO 534:2011, 3.2, modified3.4apparent sheet densitymass per unit volume, expressed in grams per cubic centimetre, and calculated from the single sheet thicknessSOURCE: ISO 534:2011, 3.33.5ap

45、parent bulk densitymass per unit volume, expressed in grams per cubic centimetre, and calculated from the bulking thicknessSOURCE: ISO 534:2011, 3.43.6apparent specific sheet volumevolume per unit mass, expressed in cubic centimetres per gram, and calculated from the single sheet thicknessNote 1 to

46、entry: This term is normally applicable to paper and most commonly calculated for paper bulk.2 ISO 2014 All rights reservedCopyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS

47、-,-,-BS ISO 15397:2014ISO 15397:2014(E)SOURCE: ISO 534:2011, 3.53.7apparent specific bulk volumevolume per unit mass, expressed in cubic centimetres per gram, and calculated from the bulking thicknessSOURCE: ISO 534:2011, 3.63.8Parker Print-Surf roughnessPPSmean gap between a sheet of paper or board

48、 and a flat circular land pressed against it under specified conditionsNote 1 to entry: It is expressed in micrometres and calculated based on the airflow between the measuring land and the test piece.SOURCE: ISO 8791-4:2007, 3.1, modified3.9.1Bendtsen roughnessmeasure of the rate at which air will pass between a flat circular land and a sheet of paper, when tested under specified conditions and at operating pressureNote 1 to entry: It is expressed in millilitres per