BS ISO 15635-2003 Coated abrasives Flap discs《砂布 页轮圆盘》.pdf

1、BRITISH STANDARD BS ISO 15635:2001 Coated abrasives Flap discs ICS 25.100.70 BS ISO 15635:2001 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 14 October 2003 BSI 14 October 2003 ISBN 0 580 42769 2 National foreword This British Standard repr

2、oduces verbatim ISO 15635:2001 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee MTE/13, Grinding wheels, abrasive tools, paper cloths and powders, which has the responsibility to: A list of organizations represented on this c

3、ommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using th

4、e “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from l

5、egal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK.

6、 Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii to iv, pages 1 to 4, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publicatio

7、n Amd. No. Date CommentsReference number INTERNATIONAL STANDARD ISO 15635 First edition 2001-04-01 Coated abrasives Flap discs Produits abrasifs appliqus Disques lamelles BSISO15636:2001ii BSISO15636:2001ISO 53651:(1002)Eiii Foreword ISO (the International Organization for Standardization) is a worl

8、dwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on

9、that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted i

10、n accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Atte

11、ntion is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO 15635 was prepared by Technical Committee ISO/TC 29, Small tools

12、, Subcommittee SC 5, Grinding wheels and abrasives. BSISO15636:2001BSISO15636:2001INTENRATIONAL TSANDADR ISO 53651:(1002)E1 Coated abrasives Flap discs 1 Scope This International Standard specifies the nominal dimensions, tolerances and designations of flap discs. It applies to flap discs intended f

13、or use on hand held grinding machines without support discs. 2 Normative reference The following normative document contains provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of

14、 these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent edition of the normative document indicated below. For undated references, the latest edition of the normative document refe

15、rred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 554:1976, Standard atmospheres for conditioning and/or testing Specifications. BSISO15636:2001ISO 53651:(1002)E 2 3 Requirements 3.1 Types and dimensions Figure 1 Type A disc Figure 2 Type B di

16、sc Table 1 Dimensions Dimensions in millimeters D 3 100 115 125 150 180 200 230 H 0,16 0 16 22,23 K min. 35,5 45 T u 22 BSISO15636:2001ISO 53651:(1002)E3 3.2 Test conditions The limit deviations given in Table 1 are valid under the following conditions: Temperature: 20 C 2 C Relative humidity: 65 %

17、5% in accordance with ISO 554 When flap discs are tested they shall be stored for at least 24 h under the above conditions. 4 Designation A flap disc conforming to this International Standard shall designated by a) “Flap disc“; b) reference to this International Standard, i.e. ISO 5635; c) Type A or

18、 B; d) outside diameter, D, in millimetres. EXAMPLE A flap disc Type A with outside diameter D = 180 mm is designated as follows: Flap disc ISO 15635 A 180 5 Marking Flap discs shall be marked with: a) grain size; b) manufacturer, supplier, importer or their registered trademark; c) outside diameter

19、; d) maximum operating speed; e) maximum permissible speed of rotation. BSISO15636:2001ISO 53651:(1002)E 4 Bibliography 1 ISO 6344-1:1998, Coated abrasives Grain size analysis Part 1: Grain size distribution test. 2 ISO 6344-2:1998, Coated abrasives Gra i nsiz ean al ysi s Part 2: Determination of g

20、rain size distribution of macrogrits P12 to P220. 3 ISO 6344-3:1998, Coated abrasives Gra i nsiz ean al ysi s Part 3: Determination of grain size distribution of microgrits P240 to P2500. BSISO15636:2001blankBS ISO 15635:2001 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution

21、 BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should m

22、ake sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee r

23、esponsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders f

24、or all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is

25、BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters

26、Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments

27、 and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards

28、Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted u

29、nder the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of imp

30、lementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.