BS ISO 15638-3-2013 Intelligent transport systems Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Operating requirements Appro.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS ISO 15638-3:2013Intelligent transport systems Framework for collaborativetelematics applications forregulated commercial freightvehicles (TARV)Part 3: Operating requirements,

2、ApprovalAuthority procedures, and enforcementprovisions for the providers of regulatedservicesBS ISO 15638-3:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 15638-3:2013.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/278, I

3、ntelligent transport systems.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 20

4、13. Published by BSI StandardsLimited 2013ISBN 978 0 580 75867 6ICS 03.220.20; 35.240.60Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 June 2013.Amendments iss

5、ued since publicationDate Text affectedBS ISO 15638-3:2013Reference numberISO 15638-3:2013(E)ISO 2013INTERNATIONAL STANDARD ISO15638-3First edition2013-06-15Intelligent transport systems Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 3: Oper

6、ating requirements, “Approval Authority” procedures, and enforcement provisions for the providers of regulated services Systmes intelligents de transport Cadre pour applications tlmatiques collaboratives pour vhicules de fret commercial rglement (TARV) Partie 3: Exigences de fonctionnement, modes op

7、ratoires de lAutorit dapprobation et dispositions dexcution pour les fournisseurs de services rglements BS ISO 15638-3:2013ISO 15638-3:2013(E) COPYRIGHT PROTECTED DOCUMENT ISO 2013 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in

8、 any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case po

9、stale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2013 All rights reservedBS ISO 15638-3:2013ISO 15638-3:2013(E) ISO 2013 All rights reserved iiiContents Page Foreword ix Introduction xi 1 Scope 1 2 Conform

10、ance . 1 3 Normative references 2 4 Terms and definitions . 2 5 Symbols (and abbreviated terms) 5 6 General overview and framework 6 7 Requirements . 8 8 DEFINITION OF THE ROLES AND RESPONSIBILITIES OF KEY ACTORS 8 8.1 Generic service requirements 8 8.2 User . 9 8.2.1 User specification US1: Prime U

11、ser 9 8.2.2 User specification US2: Secondary User 9 8.2.3 User specification US3: Mandatory application service enrolment . 9 8.2.4 User specification US4: Voluntary application service enrolment 10 8.2.5 User specification US5: Service provider engagement . 10 8.3 Service provider 10 8.3.1 Service

12、 provider specification SP1 : Service provider definition 10 8.3.2 Service provider specification SP2: Service provider Approval Authority requirement 10 8.3.3 Regimes for regulated application service provision 10 8.3.4 Service provider specification SP3: Application service definition . 11 8.3.5 S

13、ervice provider specification SP4: Service provision . 11 8.3.6 Service provider specification SP5: Service provider charging 11 8.3.7 Service provider specification SP6: Service provider charging fees on behalf of jurisdiction regulator . 11 8.3.8 Service provider specification SP7: Service provide

14、r transmission of data to the jurisdiction and/or its agents . 11 8.3.9 Service provider specification SP8: Provision of non-regulated commercial services 12 8.4 Wireless communications service provider . 12 8.4.1 Service provider specification SP9: Wireless communications service provision 12 8.4.2

15、 Service provider specification SP10: Responsibility for wireless communications service provision 12 8.5 IVS installer 12 8.5.1 Original equipment manufacturer specification OEM1: Responsibility where IVS is installed at time of vehicle manufacture . 13 8.5.2 Service provider specification SP11: Re

16、sponsibility where IVS is installed post manufacture of the vehicle . 13 8.6 IVS maintainer 13 8.6.1 User responsibility US6: Responsibility to maintain the IVS . 13 8.6.2 Service provider specification SP12: Responsibility of the service provider contracted to maintain an IVS 14 8.7 Jurisdiction 15

17、 8.7.1 Jurisdiction specification JS1: Definition of regulated application services for TARV . 15 8.7.2 Jurisdiction specification JS2: Definition of status of regulated application services for TARV . 15 8.7.3 Jurisdiction specification JS3: Obtain supporting legislation/regulation for a regulated

18、application service for TARV . 15 BS ISO 15638-3:2013ISO 15638-3:2013(E) iv ISO 2013 All rights reserved8.7.4 Jurisdiction specification JS4: Manage and regulate the provision of the regulated application services 15 8.8 Approval Authority 15 8.8.1 Jurisdiction specification JS5: create or appoint a

19、 Approval Authority16 8.8.2 Approval Authority specification AA1: Consider and appoint candidates to be service providers .16 8.8.3 Approval Authority specification AA2: Test and approve service providers 16 8.8.4 Approval Authority specification AA3: Audit service providers 16 8.8.5 Approval Author

20、ity specification AA4: Type approve IVS 17 8.8.6 Approval Authority specification AA5: Test IVS functionality 17 8.9 Contract options 17 8.9.1 User requirement US6 : Service Provider - User Contract .17 9 IVS REQUIREMENTS .18 9.1 Physical 18 9.1.1 IVS functional description 18 9.1.2 HMI aspects 18 9

21、.2 Data .18 9.2.1 IVS essential data collection 18 9.2.2 IVS essential data processing 18 9.2.3 IVS identification 19 9.3 IVS specification IVS1: Robustness and suitability .19 9.3.1 Robustness 19 9.3.2 Suitability for use .19 9.4 IVS specification IVS2: Availability 20 9.5 IVS specification IVS3: E

22、nvironmental 20 9.6 IVS specification IVS4: Secure data storage 20 9.7 IVS specification IVS5: Data storage means .21 9.8 IVS specification IVS6: Data input means .21 9.9 IVS specification IVS7: Central processing unit .21 9.10 IVS specification IVS8: Secure data processing 22 9.11 IVS specification

23、 IVS9: Connectivity means to/from auxiliary equipment 22 9.12 IVS specification IVS11: Communications means .22 9.13 IVS Classification .22 9.13.1 IVS specification IVS12: CLASS A - able to communicate with its attached trailers .22 9.13.2 IVS specification IVS13: CLASS B not able to communicate wit

24、h its attached trailers 23 9.14 IVS specification IVS14: IVS identification of attached trailers 23 9.15 IVS specification IVS15: Physical trailer marking 23 9.16 IVS specification IVS16: Equipped trailer identification (trailer ID) 23 9.17 IVS specification IVS17: Freight land conveyance content id

25、entification and communication 23 9.18 Equipped trailer identification devices 23 9.18.1 IVS specification IVS18: Equipped trailer identification devices 23 9.18.2 IVS specification IVS19: Trailer identification device requirements 24 9.18.3 IVS specification IVS20: Integrity of trailer identificati

26、on 24 9.19 IVS specification IVS21: Power supply .24 9.20 IVS specification IVS 22: external power supply failure/shut down .25 9.21 IVS specification IVS23: Security seals .25 9.22 IVS specification IVS24: GNSS capability .25 9.23 IVS specification IVS25: Accelerometer capability 25 9.24 IVS specif

27、ication IVS26: Gyroscope capability 26 9.25 IVS specification IVS27: Still camera data 26 9.26 IVS specification IVS28: Video data .26 9.27 Alarm status data and records .26 9.27.1 IVS specification IVS29: Alarm types and data 26 9.27.2 IVS specification IVS30: Independent movement sensing 27 9.28 I

28、VS specification IVS31: Vehicle location .27 10 PROCEDURES FOLLOWING POWER-UP OF THE VEHICLE 28 10.1 IVS specification IVS32: When vehicle is powered up (ignition status ON) 28 10.2 IVS specification IVS33: Communication set-up 28 BS ISO 15638-3:2013ISO 15638-3:2013(E) ISO 2013 All rights reserved v

29、10.2.1 Application service provider generates request for Core Application Data . 29 10.2.2 IVS generates send of Core Application Data (CAD) . 29 10.2.3 Data compression . 29 10.2.4 Data acknowledgement. 29 10.2.5 In the event of failure to receive the DATA-ACK 29 10.3 IVS specification IVS34: Comm

30、unication session clear-down . 29 10.4 CAD not received correctly 30 11 RECORDS TRANSFER AND BACKUP PROCEDURES 30 11.1 Periodicity determined by the jurisdiction 30 11.2 Frequency of records transfer . 30 11.3 Records to be transferred 30 11.4 Procedures for transfer of stored data 30 11.4.1 IVS spe

31、cification IVS35: stored data Communication set-up . 30 11.4.2 IVS generates send of stored data 30 11.4.3 Data compression . 31 11.4.4 Stored data acknowledgement 31 11.4.5 In the event of failure to receive the SD-ACK . 31 11.5 Deletion of data stored in the non-volatile memory of the IVS . 31 11.

32、5.1 IVS data records deleted only after fulfilment of conditions 31 11.6 Data testing 31 11.7 Data backup and archiving . 32 12 IVS - VEHICLE 32 12.1 Core Application Data . 32 12.1.1 Jurisdiction specification JS6: Core Application Data 33 12.2 Basic Vehicle Data . 33 12.2.1 Jurisdiction specificat

33、ion JS7: Basic Vehicle Data . 33 12.3 OEM installed IVS 34 12.3.1 Regulation regime . 34 12.3.2 Physical installation aspects . 34 12.3.3 Vehicle data bus 34 12.3.4 Initial set-up . 34 12.4 Aftermarket installed IVS 35 12.4.1 Regulation regime . 35 12.4.2 Physical installation aspects . 35 12.4.3 Ve

34、hicle data bus 36 12.4.4 Initial set-up . 36 12.5 Interoperability certificate 37 12.6 Non-TARV functionality in IVS . 37 12.6.1 Complementary access and use 37 12.6.2 Reporting to jurisdiction regulator 37 12.6.3 IVS specification IVS36: Shall not interfere with TARV application service provision 3

35、7 12.6.4 IVS specification IVS37: Shall demonstrate complementariness 37 12.7 Post installation events 37 12.7.1 Service provider requirement SP23: Replacement of IVS. 37 12.7.2 Service provider requirement SP24: Upgrade of the IVS 38 12.7.3 Service provider requirement SP25: Repair of the IVS . 38

36、12.7.4 Service provider requirement SP26: Service of the IVS 38 12.8 Change of regulated commercial freight vehicle properties 38 12.8.1 User responsibility US7: Change of regulated commercial freight vehicle properties . 38 12.8.2 Service provider responsibility SP27: Change of regulated commercial

37、 freight vehicle properties . 38 12.9 Activation . 39 12.9.1 Service provider responsibility SP28: IVS activation 39 12.10 Maintenance and continuity of application service provider systems 39 12.10.1 Update and installation of applications 39 12.10.2 Introduction of new applications . 39 12.10.3 Se

38、rvice provider responsibility SP29: System modifications, upgrades and changes . 39 12.10.4 Service provider responsibility SP30: Minimisation of on board processing and memory demands . 39 BS ISO 15638-3:2013ISO 15638-3:2013(E) vi ISO 2013 All rights reserved12.10.5 Service provider responsibility

39、SP31: Responsibility for design, development, testing .40 12.10.6 Approval Authority specification AA8: Approve new applications 40 12.11 Deactivation 40 12.12 End of life provisions. .40 12.12.1 User responsibility US8: End of life notification 40 12.12.2 Service provider responsibility SP32: End o

40、f life notification 40 13 PROVISIONS TO ENABLE MONITORING AND ENFORCEMENT OF REGULATED COMMERCIAL FREIGHT VEHICLES 41 13.1 Jurisdiction specification JS8: Definition of regulated commercial freight vehicle .41 13.2 Jurisdiction specification JS9: Provision of regulations to monitor and enforce 41 14

41、 Approval Authority PROCEDURES 41 14.1 General Approval Authority process 41 14.2 Jurisdiction specification JS10: Provision of Approval Authority test regime 42 14.3 Jurisdiction specification JS11: Provision of Approval Authority test suites .42 14.4 IVS Approval Authority .43 14.4.1 IVS specifica

42、tion IVS1: Robustness and suitability .43 14.4.2 IVS specification IVS2: Availability 44 14.4.3 IVS specification IVS3: Environmental 44 14.4.4 IVS specification IVS4: Secure data storage 44 14.4.5 IVS specification IVS6: Data input means .44 14.4.6 IVS specification IVS7: Central processing unit .4

43、4 14.4.7 IVS specification IVS8: Secure data processing 45 14.4.8 IVS specification IVS9: Connectivity means to/from auxiliary equipment 45 14.4.9 IVS specification 10: IVS clock .45 14.4.10 IVS specification IVS11: Communications means .45 14.4.11 IVS Classification (IVS12, IVS13, IVS 14) .46 14.4.

44、12 IVS specification IVS21: Power supply .46 14.4.13 IVS specification IVS 22: external power supply failure/shut down .46 14.4.14 IVS specification IVS24: GNSS capability .46 14.4.15 IVS specification IVS25: Accelerometer capability 46 14.4.16 IVS specification IVS26: Gyroscope capability 46 14.4.1

45、7 IVS specification IVS27: Still camera data 46 14.4.18 IVS specification IVS28: Video data .46 14.4.19 IVS specification IVS29: Alarm types and data 46 14.4.20 IVS specification IVS30: Independent movement sensing 47 14.4.21 IVS specification IVS31: Vehicle location .47 14.4.22 IVS specification IV

46、S32: When vehicle is powered up (ignition status ON) 47 14.4.23 IVS specification IVS33: Communication set-up (1) 48 14.4.24 IVS specification IVS33: Communication set-up (2) SEND Core Application Data 48 14.4.25 IVS specification IVS34: Communication session clear-down .48 14.4.26 IVS specification

47、 IVS35: Communication set-up : transfer of stored data 49 14.4.27 IVS data records deleted only after fulfilment of conditions 49 14.4.28 IVS unique identification .49 14.4.29 Identification code of the registered commercial freight vehicle .49 14.4.30 Non-TARV functionality in IVS: Complementary ac

48、cess and use 49 14.4.31 Change of regulated commercial freight vehicle properties .50 14.5 IVS Approval Authority .50 14.5.1 Unique unambiguous identifier (IVS ID) 50 14.5.2 Affixation 50 14.5.3 Test mechanical capability .50 14.5.4 Test connection to prime mover/rigid truck .50 14.5.5 Test durabili

49、ty 50 14.5.6 Test vibration .51 14.5.7 Test bump/impact/shock .51 14.5.8 Test fall .51 14.5.9 Test humidity 51 14.5.10 Test temperature 51 14.5.11 Test dust and water ingress protection (1) .51 14.5.12 Test dust and water ingress protection (2) .51 BS ISO 15638-3:2013ISO 15638-3:2013(E) ISO 2013 All rights reserved vii14.5.13 Test radio frequency and electrical interference . 51 14.5.14 Electromagnetic emissions 51 14.5.15 IVS specification IVS9: Connectivity means to/fro