1、BSI Standards PublicationBS ISO 15638-8:2014Intelligent transport systems Framework for cooperativetelematics applications forregulated vehicles (TARV)Part 8: Vehicle access managementBS ISO 15638-8:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 15638-8:2
2、014.It supersedes PD ISO/TS 15638-8:2013 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/278, Intelligent transport systems.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not pu
3、rport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 80636 0ICS 03.220.20; 35.240.60Compliance with a British Standard cannot confer immunity fromlega
4、l obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2014.Amendments issued since publicationDate Text affectedBS ISO 15638-8:2014 ISO 2014Intelligent transport systems Framework for cooperative telematics applications for reg
5、ulated vehicles (TARV) Part 8: Vehicle access managementSystmes intelligents de transport Cadre pour applications tlmatiques coopratives pour vhicules rglements (TARV) Partie 8: Monitorage de laccs des vhiculesINTERNATIONAL STANDARDISO15638-8First edition2014-07-15Reference numberISO 15638-8:2014(E)
6、BS ISO 15638-8:2014ISO 15638-8:2014(E)ii ISO 2014 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2014All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying
7、, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail c
8、opyrightiso.orgWeb www.iso.orgPublished in SwitzerlandBS ISO 15638-8:2014ISO 15638-8:2014(E) ISO 2014 All rights reserved iiiContents PageForeword ivIntroduction vi1 Scope . 12 Conformance . 13 Normative references 24 Terms and definitions . 25 Symbols (and abbreviated terms) 86 General overview and
9、 framework requirements . 97 Requirements for services using generic vehicle data . 98 Application services that require data in addition to basic vehicle data .108.1 General 108.2 Quality of service requirements 108.3 Test requirements . 108.4 Marking, labelling, and packaging . 109 Common features
10、 of regulated TARV application services 109.1 General 109.2 Common role of the jurisdiction, approval authority, service provider, and user .119.3 Common characteristics for instantiations of regulated application services 119.4 Common sequence of operations for regulated application services .119.5
11、 Quality of service 129.5 Information security . 129.6 Data naming content and quality . 129.7 Software engineering quality systems . 129.8 Quality monitoring station 129.9 Audits . 129.10 Data access control policy 129.11 Approval of IVSs and service providers 1210 Vehicle access management (VAM) 1
12、210.1 TARV VAM service description and scope - use cases 1210.2 Concept of operations for vehicle access management 1310.3 Sequence of operations for TARV VAM 2610.4 Generic TARV VAM data naming content and quality .2710.5 Specific TARV VAM data naming content and quality .2810.6 TARV VAM applicatio
13、n service specific provisions for quality of service 2810.7 TARV VAM application service specific provisions for test requirements 2810.8 TARV VAM application specific rules for the approval of IVSs and “service providers” .2811 Declaration of patents and intellectual property 29Annex A (informative
14、) ASN.1 Modules for ISO 15638-8 data concepts 30Annex B (informative) Independent testing of the protocols defined in this part of ISO 15638 33Bibliography .49BS ISO 15638-8:2014ISO 15638-8:2014(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national
15、standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International
16、 organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for
17、 its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org
18、/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be
19、in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions
20、related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 204, Intelligent transport systems.This first
21、edition cancels and replaces ISO/TS 15638-8:2013.ISO 15638 consists of the following parts, under the general title, Intelligent transport systems Framework for cooperative telematics applications for regulated vehicles (TARV): Part 1: Framework and architecture Part 2: Common platform parameters us
22、ing CALM Part 3: Operating requirements, Approval Authority approval procedures, and enforcement provisions for the providers of regulated services Part 5: Generic vehicle information Part 6: Regulated applications Part 7: Other applications Part 8: Vehicle access management Part 9: Remote electroni
23、c tachograph monitoring (RTM) Part 10: Emergency messaging system/eCall (EMS) Part 11: Driver work records Part 12: Vehicle mass monitoring Part 14: Vehicle access control Part 15: Vehicle location monitoring Part 16: Vehicle speed monitoringiv ISO 2014 All rights reservedBS ISO 15638-8:2014ISO 1563
24、8-8:2014(E) Part 17: Consignment and location monitoring Part 18: ADR (Dangerous Goods) transport monitoring (ADR) Part 19: Vehicle parking facilities (VPF)The following parts are under preparation Part 4: System security requirements Part 13: Mass information for jurisdictional control and enforcem
25、ent ISO 2014 All rights reserved vBS ISO 15638-8:2014ISO 15638-8:2014(E)IntroductionMany ITS technologies have been embraced by commercial transport operators (4.38) and freight owners, in the areas of fleet management, safety and security. Telematics (4.52) applications have also been developed for
26、 governmental use. Such regulatory services in use or being considered vary from jurisdiction (4.33) to jurisdiction, but include electronic on-board recorders, vehicle charging, digital tachograph (4.51), on-board mass (4.36) monitoring, vehicle access (4.1) methods, hazardous goods (4.44x) trackin
27、g and e-call (4.26). Additional applications with a regulatory impact being developed include, fatigue management, speed monitoring and heavy vehicle charging based on mass (57), location, distance and time.In such an emerging environment of regulatory and commercial applications (4.17), it is timel
28、y to consider an overall architecture (4.12) (business and functional) that could support these functions from a single platform within a commercial freight vehicle that operate within such regulations. International Standards will allow for a speedy development and specification (4.50) of new appli
29、cations that build upon the functionality of a generic specification platform. A suite of standards deliverables is required to describe and define the framework (4.28) and requirements so that the on board equipment and back office systems can be commercially designed in an open market to meet comm
30、on requirements of jurisdictions (4.33).This suite of standards addresses and defines the framework (4.28) for a range of cooperative telematics (4.52) applications for regulated vehicles (4.42) (such as access methods (4.3), driver fatigue management, speed monitoring, on-board mass (4.36) monitori
31、ng and charging). The overall scope includes the concept of operation, legal and regulatory issues, and the generic cooperative provision of services to regulated vehicles (4.42), using an on-board ITS platform. The framework is based on a (multiple) service provider (4.48) oriented approach with pr
32、ovisions for the approval (4.9) and auditing (4.13) of service providers.This suite of standards deliverables will provide the basis for future development of cooperative telematics (4.52) applications for regulated vehicles (4.42). Many elements to accomplish this are already available. Existing re
33、levant standards will be referenced, and the specifications (4.50) will use existing standards (such as CALM) wherever practicable, allow for a powerful platform for highly cost-effective delivery of a range of telematics applications for regulated vehicles (4.42), a business architecture (4.12) bas
34、ed on a (multiple) service provider (4.48) oriented approach, and address legal and regulatory aspects for the approval (4.9) and auditing (4.13) of service providers.This suite of standards deliverables is timely as many governments (Europe, North America, Asia, and Australia/New Zealand) are consi
35、dering the use of telematics (4.52) for a range of regulatory purposes. Ensuring that a single in-vehicle platform can deliver a range of services to both government and industry through open standards and competitive markets is a strategic objective.This part of the ISO 15638 family of standards de
36、liverables provides specifications (4.50) for vehicle access management and monitoring.NOTE 1 The definition of what comprises a “regulated” vehicle is regarded as an issue for National decision, and may vary from jurisdiction (4.33) to jurisdiction. This suite of standards deliverables does not imp
37、ose any requirements on nations in respect of how they define a regulated vehicle (4.42).NOTE 2 The definition of what comprises a “regulated” service is regarded as an issue for National decision, and may vary from jurisdiction (4.33) to jurisdiction. This suite of standards deliverables does not i
38、mpose any requirements on nations in respect of which services for regulated vehicles (4.42) jurisdictions will require, or support as an option, but will provide standardized sets of requirements descriptions for identified services to enable consistent and cost efficient implementations where impl
39、emented.vi ISO 2014 All rights reservedBS ISO 15638-8:2014INTERNATIONAL STANDARD ISO 15638-8:2014(E)Intelligent transport systems Framework for cooperative telematics applications for regulated vehicles (TARV) Part 8: Vehicle access management1 ScopeThis part of ISO 15638 addresses the provision of
40、“vehicle access management” (4.45) (and monitoring) and specifies the form and content of such data required to support such systems, and access methods (4.3) to that data.The scope of this part of ISO 15638 is to provide specifications (4.50) for common communications and data exchange aspects of t
41、he application service (4.6) vehicle access monitoring that a regulator (4.43) may elect to require or support as an option, includinga) high level definition of the service that a service provider (4.48) has to provide, (The service definition describes common service elements; but does not define
42、the detail of how such an application service (4.6) is instantiated, not the acceptable value ranges of the data concepts defined),b) means to realize the service, andc) application data, naming content, and quality that an IVS (4.29) has to deliver.The definition of what comprises a “regulated” ser
43、vice is regarded as an issue for National decision, and may vary from jurisdiction (4.33) to jurisdiction. This International Standard does not impose any requirements on nations in respect of which services for regulated vehicles jurisdictions will require, or support as an option, but provides sta
44、ndardized sets of requirements descriptions for identified services to enable consistent and cost efficient implementations where instantiated.This International Standard has been developed for use in the context of regulated commercial freight vehicles hereinafter referred to as “regulated vehicles
45、” (4.42). There is nothing, however, to prevent a jurisdiction extending or adapting the scope to include other types of regulated vehicles, as it deems appropriate.2 ConformanceRequirements to demonstrate conformance to any of the general provisions or specific application services (4.6) described
46、in this part of ISO 15638 shall be within the regulations imposed by the jurisdiction (4.33) where they are instantiated. Conformance requirements to meet the provisions of this International Standard are therefore deemed to be under the control of, and to the specification of, the jurisdiction wher
47、e the application service(s) is/are instantiated.The protocols defined in this part of ISO 15638 have been independently tested. Annex B provides results of these tests. In any conformance assurance process undertaken by candidate systems, where appropriate the results may be used as part of its pro
48、cess of conformance compliance. ISO 2014 All rights reserved 1BS ISO 15638-8:2014ISO 15638-8:2014(E)3 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited
49、applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 15638-1, Intelligent transport systems Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 1: Framework and architectureISO 15638-2, Intelligent transport systems Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 2: Common platform parameters using CALMISO 15638-3, Intelligent transp
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1