BS ISO 16016-2016 Technical product documentation Protection notices for restricting the use of documents and products《技术产品文件管理 限制文件和产品使用的保护通告》.pdf

1、BSI Standards PublicationBS ISO 16016:2016Technical productdocumentation Protectionnotices for restricting the useof documents and productsBS ISO 16016:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 16016:2016.It supersedes BS ISO 16016:2000 which is with

2、drawn.The UK participation in its preparation was entrusted to TechnicalCommittee TDW/4, Technical Product Realization.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contra

3、ct. Users are responsible for its correctapplication. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 86511 4ICS 01.110Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority

4、of theStandards Policy and Strategy Committee on 30 April 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS ISO 16016:2016 ISO 2016Technical product documentation Protection notices for restricting the use of documents and productsDocumentation technique de produits S

5、ymboles et clauses de protection utiliss pour les documents et produits dont lusage est rservINTERNATIONAL STANDARDISO16016Second edition2016-04-01Reference numberISO 16016:2016(E)BS ISO 16016:2016ISO 16016:2016(E)ii ISO 2016 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2016, Published in Swi

6、tzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be r

7、equested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 16016:2016ISO 16016:2016(E)Foreword ivIntrodu

8、ction v1 Scope . 12 Normative references 13 Terms and definitions . 14 Indication of protection rights . 14.1 General . 14.2 Copyright 24.3 Patents and utility models 24.4 Designs (industrial designs) 24.5 Protection of topography of semiconductor product 34.6 Registered trademark . 34.7 Use . 35 Wo

9、rding of mention protecting the documents . 35.1 Complete version 35.2 Abridged version . 4Annex A (informative) Translations of the protection notice given in 5.1 5Bibliography 7 ISO 2016 All rights reserved iiiContents PageBS ISO 16016:2016ISO 16016:2016(E)ForewordISO (the International Organizati

10、on for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established ha

11、s the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The p

12、rocedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the edit

13、orial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent righ

14、ts identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an expla

15、nation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.htmlThe committee respon

16、sible for this document is Technical committee ISO/TC 10, Technical product documentation, Subcommittee SC 1, Basic conventions.This second edition cancels and replaces the first edition (ISO 16016:2000), of which it constitutes a minor revision.iv ISO 2016 All rights reservedBS ISO 16016:2016ISO 16

17、016:2016(E)IntroductionThe existence of document and product protection, as well as its extent, is primarily oriented towards fulfilling the requirements of industrial property rights and copyright law. In order to draw the attention of users to this legally provided protection, additional safeguard

18、s are recommended through the use of protection notices that forestall the improper use of documents and products.Normally, full protection is afforded only by appropriate contractual agreements between the involved parties. The protection notices specified in this International Standard serve to wa

19、rn and explain. They are designed to facilitate the furnishing of proof and offer additional safeguards to authors and holders of commercial protection rights.If any national laws require additional or other requirements for national trade, for example the use of national language, those requirement

20、s are to be respected.The WIPO standards cited can be obtained from:World Intellectual Property Organization34 chemin des ColombettesCH-1211 Geneva 20http:/www.wipo.int/portal/en/index.html ISO 2016 All rights reserved vBS ISO 16016:2016BS ISO 16016:2016Technical product documentation Protection not

21、ices for restricting the use of documents and products1 ScopeThis International Standard specifies the protection notices which serve to prevent the improper use of documents and products whose usage is restricted.With the benefit of a uniform text, protection notices draw attention to the existence

22、 of an industrial property right or copyright. Furthermore, they clearly show that the owner of the right claims legal protection to the fullest extent and, in addition to this, they restrict the utilization of the documents or products concerned.2 Normative referencesThe following documents, in who

23、le or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.WIPO Standard ST.3, Two-letter codes fo

24、r the representation of states, other entities and organizationsWIPO Standard ST.16, Standard code for the identification of different kinds of patent documents3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.3.1documentmedium with information recor

25、ded on or in itSOURCE: ISO/IEC Guide 2:2004, 3.1, Note 2 to entryNote 1 to entry: This definition covers paper documents, electronic data, software programmes, graphics, videos and recorded sounds.3.2productthing or substance produced by a natural or artificial processSOURCE: ISO 103031:19944 Indica

26、tion of protection rights4.1 GeneralIt is recommended that holders or licensees of protection rights who wish to draw attention to these rights and avoid their infringement use the markings specified in 4.2 to 4.4.INTERNATIONAL STANDARD ISO 16016:2016(E) ISO 2016 All rights reserved 1BS ISO 16016:20

27、16ISO 16016:2016(E)4.2 CopyrightThe existence of a copyright is indicated by either the character C in a circle, or Name of owner of original or transferred rights, followed by the year of the first publication of the document.NOTE This notice corresponds to article III, paragraph 1 of the Universal

28、 Copyright Convention, which also provides that the mentioned data be designated in a manner that expresses the reservation of copyright with sufficient clarity. by the designation.“Copyright reserved”4.3 Patents and utility modelsThe existence of a patent notice is indicated by the character P in a

29、 circle, and that of a utility model notice by the character U in a circle, followed by these three data elements: the country code according to WIPO Standard ST.3 (corresponding to ISO 316613supplemented by the code for international organizations concerned with commercial protection laws); the pub

30、lication or registration number; letter code according to WIPO-Standard ST.16.EXAMPLE 1 ring2PFR 2 775 254 A1.EXAMPLE 2 ring2UUS 5,927,354 B.4.4 Designs (industrial designs)Designs may be designated by the term “registered design” or “design patent”. The existence of a design is indicated by the cha

31、racter D in a circle, followed by these two data elements: the country code (see 4.3); the registration or publication number of the design.EXAMPLE ring2DDE 496 00 0001.2 ISO 2016 All rights reservedBS ISO 16016:2016ISO 16016:2016(E)4.5 Protection of topography of semiconductor productThe existence

32、of a protected topography of a semiconductor product is indicated by a capital T as follows:T, T, T , T*, ,TTThis symbol is followed by the name of the owner of topography of semiconductor product or an abbreviation by which the name is recognized or is generally known.4NOTE 1 This notice correspond

33、s to article 9 of Reference 4 on the legal protection of topographies of semiconductor products. This legal protection is extended to persons from a Member of the World Trade Organization (WTO) by Reference 5.NOTE 2 The characters *M* or character M in a circle are also used (mask work notice in acc

34、ording with 909 of Reference 6.4.6 Registered trademarkThe existence of a registered trademark is indicated by the character R in a circle, .This character is used to provide notice that the preceding mark (word or symbol) is a trademark or service mark that has been registered with a national paten

35、t and trademark office.This character is immediately following the mark (word or symbol) in superscript style.Unregistered trademarks may be marked with characters TM. Unregistered service marks may be marked with characters SM. The characters are immediately following the mark (word or symbol) in s

36、uperscript style.4.7 UseThe abovementioned notices may be used when citing protected documents or products in other publications, such as catalogues, offers, or brochures. If it is not possible to use the circled character, for example because it is not within the character set of the textprocessing

37、 system being used, the complete term shall be typed for example, Utility Model CH 679439 B5.The copyright notice refers to the prohibition of physical reproduction, while notices for patents, utility models and designs refer to the prohibition of the use for commercial purposes of the technical pri

38、nciple on which the related object (or process) is based, and forbid reproduction or copying for commercial use. These protection notices do not affect the communication of information on the documents or products in question.5 Wording of mention protecting the documents5.1 Complete versionFor addit

39、ional protection of the content or information, it is recommended that the following wording be employed:“The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable

40、for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design.”The explicit term for the document concerned (for example, technical drawing, instruction, etc.) may be used instead of the word “document” where this is judged to be preferable. The restr

41、iction of the use of a document may be suspended by means of the written consent of the holder of the protection rights. ISO 2016 All rights reserved 3BS ISO 16016:2016ISO 16016:2016(E)It is recommended that the documents destined for cession to other language partners be provided with one of the la

42、nguage versions of the protection notice presented in Annex A.5.2 Abridged versionWhere use of the complete version is not expedient the following abridged version may be used:“Refer to protection notice ISO 16016”However, this version should be avoided wherever possible.4 ISO 2016 All rights reserv

43、edBS ISO 16016:2016ISO 16016:2016(E)Annex A (informative) Translations of the protection notice given in 5.1Table A.1Language code (language name) in conformance with ISO 6397Textcs(Czech)Reprodukovn, en a vyuit tohoto dokumentu, rovn sdlen jeho obsahu tet osob, je bez vslovnho souhlasu zakzno. Poru

44、en zkazu vede k odpovdnosti za vzniklou kodu. Vechna prva jsou vyhrazena rovn v ppadech udlenho patentu a zapsanho/registrovanho uitnho vzoru nebo prmyslovho vzoru.da(Danish)Dette dokument m ikke videregives til andre eller mangfoldiggres, og dets indhold m ikke udnyttes eller offentliggres, uden vo

45、res udtrykkelige tilladelse. Overtrdelser af dette vil medfre krav om skadeserstatning. Alle rettigheder forbeholdes, srling retten til gennem-frelse af patent, brugsmodel eller mnsterbeskyttelse.de(German)Weitergabe sowie Vervielfltigung dieses Dokuments, Verwertung und Mitteilung seines In-halts s

46、ind verboten, soweit nicht ausdrcklich gestattet. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte fr den Fall der Patent-, Gebrauchsmuster- oder Geschmacksmus-tereintragung vorbehalten.es(Spanish)Sin expresa autorizacin, queda terminantemente prohibida la reproduccin total o parcial de

47、este documento, as como su uso indebido y/o su exhibicin o comunicacin a terceros. A los infractores se exigir el correspondiente resarcimiento por daos y perjuicios. Quedan reservados todos los derechos inherentes, en especial los de patentes, de modelos registrados y estticos.fr(French)Toute commu

48、nication ou reproduction de ce document, sous quelque forme que ce soit, et toute exploitation ou communication de son contenu sont interdites, sauf autorisation crite expresse. Tout manquement cette rgle est illicite et expose son auteur au versement de dommages et intrts. Tous droits rservs pour l

49、e cas de la dlivrance dun brevet, dun modle dutilit ou dun modle de prsentation.it(Italian) vietato consegnare a terzi o riprodurre questo documento, utilizzarne il contenuto o renderlo comunque noto a terzi senza esplicita autorizzazione. Ogni infrazione comporta il risarcimento dei danni subiti. Sono riservati tutti i diritti derivanti dalla concessione di brevetti per invenzioni industriali di utilit o di brevetti per modelli orn